• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.603-609
• /
• 2008

개발품의 품질을 평가하기 위해 무엇을 어떻게 시험할 것인가 적합한 모델을 정하는 것은 중요하다. 개발된 제품의 대부분의 패키지화된 소프트웨어는 소스코드를 공개하지 않으므로 외부적인 동작 특성을 측정하여 평가한다. 고속철도 선로변 정보처리 기기는 단일계로 구성되어 있던 것을 최근에 2중화하므로 신뢰성을 향상하도록 개발하였다. 철도에 사용되는 용품에 대하여 성능 및 안전성을 확보하기 위하여 철도안전법에서 공인시험기관에서 품질인증을 받을 수 있도록 하고 있어 우선 규정의 적용 가능성을 검토를 하였다. 아울러 정보처리모듈 일반 및 전용 그리고 절체기에 대하여 H/W 와 S/W의 검증을 위하여 필요한 절차와 성능을 확인하는 방안을 검토하고, TFM(Track-side Functional Module) Tester기와 Simulator를 활용하여 보드별 성능시험을 하는 방안에 대하여 고찰하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1714-1719
• /
• 2003

Antilock Brake System (ABS) is indispensable safety equipment for vehicles today. In order to develop new ABS ECU suitable for pneumatic brake system of a bus, a Hardware In-the-Loop Simulation (HILS) System was developed. In this HILS, the pneumatic brake system of a bus and antilock brake component were used as hardware. For the computer simulation, the 14-Degree of Freedom (DOF) bus dynamic model was constructed using the Matlab/Simulink software package. This model was compiled and downloaded in the simulation board, where the Power PC processor was used for real-time simulation. Additional commercial package, the ControlDesk was used to monitor the dynamic simulation results and physical signal values. This paper will focus on the procedure and results of evaluating the ECU in the HILS simulation. Two representative cases, wet basalt road and $split-{\mu}$ road, were used to simulate real road conditions. At each simulated road, the vehicle was driven and stopped under the help of the developed ECU. In each simulation, the dynamical behavior of the vehicle was monitored. After enough tests in the laboratory using HILS, the parameter-tuned ECU was equipped in a real bus, which was driven and stopped in the real test field in Korea. And finally, the experiment results of ABS equipped vehicle's dynamic behavior both in HILS test and in test fields were compared.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권6호
• /
• pp.289-297
• /
• 2000

This paper presents a comparison on the resistance and characteristics of transient response of grounding systems under surge currents using frequency domain electromagnetic field analysis software package and field test. Analysis is done by computer model, based on electromagnetic field theory approach, that accurately takes into account frequency dependent characteristics of the system. The transient performance of three grounding systems is analyzed by comparison of frequency dependent impedance and the maximal transient GPR. A double exponential lighting surge current is injected at one corner of the grounding systems. The transient GPRs a rod grounding systems are higher than mesh or electrolytic grounding systems. Af field test, the results of resistance measurement and time-variant of ground resistance slightly reduce electorlytic grounding systems less than rod and mesh grounding systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.345-350
• /
• 2002

In this study, researchers classifying the artificial flaws in semiconductor packages are performed by pattern recognition technology. For this purposes, image pattern recognition package including the user made software was developed and total procedure including ultrasonic image acquisition, equalization filtration, binary process, edge detection and classifier design is treated by Backpropagation Neural Network. Specially, it is compared with various weights of Backpropagation Neural Network and it is compared with threshold level of edge detection in preprocessing method fur entrance into Multi-Layer Perceptron(Backpropagation Neural network). Also, the pattern recognition techniques is applied to the classification problem of defects in semiconductor packages as normal, crack, delamination. According to this results, it is possible to acquire the recognition rate of 100% for Backpropagation Neural Network.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.721-726
• /
• 2005

In this study, researchers classifying the artificial flaws in semiconductor. packages are performed by pattern recognition technology. For this purposes, image pattern recognition package including the user made software was developed and total procedure including ultrasonic image acquisition, equalization filtration, binary process, edge detection and classifier design is treated by Backpropagation Neural Network. Specially, it is compared with various weights of Backpropagation Neural Network and it is compared with threshold level of edge detection in preprocessing method for entrance into Multi-Layer Perceptron(Backpropagation Neural network). Also, the pattern recognition techniques is applied to the classification problem of defects in semiconductor packages as normal, crack, delamination. According to this results, it is possible to acquire the recognition rate of 100% for Backpropagation Neural Network.

• 한국전자파학회논문지
• /
• 제21권11호
• /
• pp.1214-1219
• /
• 2010

본 논문은 소프트웨어 라디오 범용 하드웨어인 USRP(Universal Software Radio Peripheral) 보드와 오픈 소스 소프트웨어 라디오 개발 툴킷인 GNU Radio 패키지를 사용하여 저속, 저전력 무선 표준인 IEEE 802.15.4 표준의 물리 계층을 구현하였다. 본 논문에서 구현한 소프트웨어 라디오 시스템은 IEEE 802.15.4 물리 계층 중 868/915 MHz 대역의 BPSK와 OQPSK 변조 방식의 송수신 물리 계층과 2.45 GHz 대역의 OQPSK 변조 방식의 물리 계층을 지원하도록 구현하였다. 또한, 구현된 소프트웨어 라디오의 시스템의 검증을 위해, 각 주파수 대역과 변조 방식을 표준에 정의된 대역 특성, 패킷 구조에 맞추어 설정하고, 송수신 테스트를 수행하였으며, 특히 2.4 GHz 대역은 CC2430 모듈과 Smart RF EV 보드를 이용하여 정상 동작을 확인하였다. 그리고 시스템의 성능은 송신 신호의 PSD 마스크 조건과 수신 상태의 아이 패턴, PER(패킷 에러율) 테스트 결과로 구현한 시스템의 성능을 검증하였다. 그 결과, 구현한 시스템이 IEEE 802.15.4 물리 계층 표준에 부합함을 확인하였다.

• 디자인학연구
• /
• 제17권3호
• /
• pp.147-156
• /
• 2004

지금까지, 웹사이트의 '사용성 테스트는(usability test)'는 피실험자에게 익숙하지 않아 자연스럽게 행동하기 힘든 '실험실 환경'에서 이뤄져왔다. 이 실험 방법은 또한 실험이 진행되는 동안 실험자가 실험자와 동일한 공간에 있어야하기 때문에 다수의 피실험자를 상대할 때 비효율적이다. 이는 실험실 기반의 사용성 테스트 법이 비용과 시간을 크게 줄일 수 있는 비동기(asynchronous)적 특성을 갖고 있지 않기 때문이다. 본 연구는 적은 수의 실험자가 다수의 피실험자를 대상으로 사용성 테스트 실험을 진행할 수 있는 비동기적 실험 방법을 제안하기 위해 문헌연구를 통해 기존의 사용성 테스트 방법과 원격 실험을 정리하였고, 이러한 연구를 바탕으로 웹사이트 원격 사용성 테스트 도구를 개발하였다. RIO라는 이름으로 개발된 도구는 웹사이트를 원격으로 사용성 평가하기 위한 태스크를 설계하는 '프로젝트 관리 모듈', 피실험자가 태스크를 수행하는 동안 인터랙션을 관찰/보고하는 '원격 인터랙션 관찰 브라우저 모듈', 수집된 인터랙션 데이터를 시각적으로 분석하는 '인터랙션 시각화/분석 모듈'로 구성되어 사용성 테스트 자료를 효율적으로 수집할 수 있는 소프트웨어 패키지의 구성과 수집 시나리오를 제안하였다.

• 한국정보처리학회논문지
• /
• 제4권9호
• /
• pp.2391-2402
• /
• 1997

TINA는 분산처리환경상에서 객체단위로서 망 관리객체와 서비스 관리객체를 공유하는 새로운 개념의 소프트웨어 계층적 개방형 통신망 구조이다. 본 논문에서는 TINA의 관리구조에서 나누고있는 6개의 기능직 영역 중 하나인 연결관리의 연결관리 패키지를, 현재까지 정의되고 규격화된 개념과 원리에 의거해서, 구현하고 시험해 보았다. 구현에 앞서서 TINA의 네가지 구조와 각각의 구조에서 수용하고있는 기본개념, 연결관리의 모데링 개념 등에 대해서 알아본다. 그리고, 구현된 각 연산객체의 기능을 정보객체들의 인터페이스를 통해 설명하고, 연결 설정 및 해제 과정을 연산객체간의 메시지 흐름을 통해 보인다.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.17-23
• /
• 2014

Purpose: The purpose of this study was to analyze and compare the relative accuracy of digitized stone models of lower full arch, using two different scanning system. Methods: Replica stone models(N=20) were produced from lower arch acrylic model. Twenty digital models were made with the white light and blue LED($Medit^{(R)}$, Korea) scanner. Two-dimensional distance between the landmarks were measured on the Delcam $CopyCAD^{(R)}$(Delcam plc, UK). Independent samples t-test was applied for comparison of the groups. All statistical analyses were performed using the SPSS software package(Statistical Package for Social Sciences for Windows, version 12.0). Results: The absolute disagreement between measurements made directly on the two different scanner-based dental digital models was 0.02~0.04mm, and was not statistically significant(P>0.05). Conclusion: The precision of the blue LED optical scanner was comparable with the digitization device, and relative accuracy was similar. However, there still is room for improvement and further standardization of dental CAD technologies.

• 경영과정보연구
• /
• 제2권
• /
• pp.237-266
• /
• 1998

The purpose of this study was to analyze the differences of application level the computer programming languages in major. The method of this study is the empirical method based on theoretical one with the previous bibliographical suduies. The sample consists of 268 listed university disclosing over the period of Dec. 1. 1997 to Du. 15. 1997. The samples were 10 university in university of Seoul, Pusan, Masan City, Korea. The data were collected by questionnaire research through interview with each person. The analysis data was carried to 268 samples by using SPSS/PC for Windows Version 7.5 statistical package. Statistical methods such as frequency analysis, chi-square test, ANOVA test, correlation analysis were used to test the research questions. This paper focuses on the design of the hypothesis test show that the 2 type are significantly different in major of university students. Before the test of research questions performed it frequency analysis by using the factor score that bring each items. The research type of 2 guoups, that is, BA Group(business administration group) and NBA Group(non-business administration guoup). To summarize the result of this study is as follows ; (1) Hypothesis 1 : Concerning about computer programming language in major, the significant difference is application the present condition. (2) Hypothesis 2 : Concerning about computer programming language in major, the significant difference is application level. (3) Hypothesis 3 : Concerning about each application software in major, the significant difference is application level. According to the results of this study, it is found that (1) Hypothesis 1 related In application the present condition of computer programming language was accepted its all at 0.05 % significance level. (2) Hypothesis 2 related to application level of computer programming language was accepted its all at 0.05 % significance level. (3) Hypothesis 3 related to application level of each application software was rejected its all. at 0.05 % significance level.