• Title/Summary/Keyword: sodium lamp

Search Result 75, Processing Time 0.021 seconds

A Life Cycle Cost Comparison of Low-Pressure Sodium Lamp and Fluorescent Lamp for Tunnel Lighting (Tunnel 조명을 위한 나트륨등과 형광등의 Life Cycle Cost 비교 연구)

  • Lee, Seok-Joon;Lee, Young-Q;Kim, Hoon
    • Proceedings of the KIEE Conference
    • /
    • 1999.07e
    • /
    • pp.2031-2034
    • /
    • 1999
  • 현재 우리나라에서는 도로망의 급속한 확충에 따라 터널의 수가 급속히 증가하고 있다. 터널은 운전자들이 주야간으로 안전하고 쾌적하게 주행할 수 있도록 설계되어야 한다. 이런 관점에서 터널의 조명설계는 매우 중요하다고 할 수 있으며, 터널의 안전성, 쾌적성, 경제성을 확보하기 위한 여러 가지 복합적인 요소들을 고려한 분석이 필요하다. 이 논문에서는 터널조명에 일반적으로 사용되고 있는 저압나트륨등에 대하여 대안으로 대두되고 있는 형광등에 대한 경제성 측면에서의 비교 방법론 연구를 수행한다. 각각의 등에 대하여 동일 한 터널 노면기준조도를 구현하기 위한 필요 등의 수를 시뮬레이션을 통하여 결정하고, 이를 기반으로 각 터널 조명에 소요되는 Life Cycle Cost를 기본 Model을 통하여 산정하고 비교하는 방법을 제시한다. 이러한 분석은 터널개발 사업의 정책적 결정에 있어 기초 방법과 자료로서 활용될 수 있을 것이다.

  • PDF

A Scheme for the Evaluation of Tunnel Lighting Alternatives - Life Cycle Cost Comparison by Simulation Approach - (Life Cycle Cost 비교에 의한 터널조명 대안분석 연구)

  • Lee, Young-Q
    • IE interfaces
    • /
    • v.14 no.2
    • /
    • pp.205-209
    • /
    • 2001
  • The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficienty of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which has usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

  • PDF

Growth and Photomorphogenesis of Cucumber Plants under Artificial Solar and High Pressure Sodium Lamp with Additional Far-red Light (태양광 파장 유사 조합광과 원적색광이 추가된 고압나트륨등 하에서의 오이의 생육과 광형태형성)

  • Kang, Woo Hyun;Kim, Jae Woo;Son, Jung Eek
    • Journal of Bio-Environment Control
    • /
    • v.28 no.1
    • /
    • pp.86-93
    • /
    • 2019
  • Plant growth and morphology are affected by light environments. The morphogenesis and growth of the plants growing in plant factories are different from those grown under sunlight due to the effect of far-red light included in sunlight. The objective of this study was to compare the morphogenesis and growth of cucumber plants grown under artificial sunlight, high pressure sodium lamp (HPS), and HPS with additional far-red light (HPS+FR). The artificial solar (AS) with a spectrum similar to sunlight was manufactured using sulfur plasma lamp, incandescent lamp, and green-reducing optical film. HPS was used as a conventional electrical light source and far-red LEDs were added for HPS+FR. The optical properties of each light source was analyzed. The morphogenesis, growth, and photosynthetic rate were compared in each light source. The ratio of red to far-red lights and phytochrome photostationary state were similar in AS and HPS+FR. There were significant differences in morphology and growth between HPS and HPS+FR, but there were no significant differences between AS and HPS+FR. SPAD was highest in HPS, while photosynthetic rate was higher at AS and HPS. Although the photosynthetic rate in HPS+FR was lower than HPS, the growth was similar in AS. It was because canopy light interception was increased by longer petioles and larger leaf areas induced by FR. It is confirmed that the electrical light with additional far-red light induces similar photomorphogenesis and growth in sunlight spectrum. From the results, we expect that similar results will be obtained by adding far-red light to electrical light sources in plant factories.

Development of High Efficiency Electronic Ballast for Low Pressure Sodium Lamp (저압 나트륨 램프용 고효율 전자식 안정기 개발)

  • 최현배;이진우
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 1999.11a
    • /
    • pp.247-249
    • /
    • 1999
  • 본 논문에서는 91[W] 저압 나트륨 램프용 고효율 전자식 안정기를 제작하여 전기적 특성을 측정하였다. 개발된 고효율 전자식 안정기는 입력 전압 220[V], 입력 전류 435[mA], 입력 전력 94[W], 역률은 98[%], 전류 고조파 함유율 19[%]로 측정되었다.

  • PDF

A Design of Self-Exciting Electronic Ballast for High Pressure Sodium Lamp Using the Pspice (Pspice를 이용한 고압나트륨 램프용 자려식 전자식 안정기 설계)

  • 노재엽;김순기;이진우
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.9-12
    • /
    • 2000
  • 본 논문은 고압 나트륨 램프용 전자식 안정기의 회로 특성을 보다 효율적이고 경제적으로 비교 평가하기 위해, Pspice를 이용하여 전자식 안정기 구동회로를 시뮬레이션하고 이를 실제 안정기 출력과 비교한 논문이다. 본 논문에서 사용한 방식은 공진형 인버터를 이용한 Half-Bridge Inverter 구조의 자려식 구동방식으로서 실제 안정기의 동작 특성과 같은 시뮬레이션 결과를 얻을 수 있었다.

  • PDF

Measurement of gas partial pressures of HPS lamp using peak shift of sodium D-lines (나트륨 D선의 PEAK SHIFT를 이용한 고압나트륨燈 봉입기체의 분압 측정)

  • 구자남;손승현;김창섭;지철근
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 1989.10a
    • /
    • pp.25-30
    • /
    • 1989
  • 고압 나트륨-수은 방전에서 파인 D선의 파란 날개아 빨간 날개 최대값의 이동과 분압 사이의 관계들을 나타내는 식을 유도했고 이식으로 실험을 해서 타당성과 유용성을 검증했다. 반데르 왈스 모델이 나트륨과 수은 원자 사이의 상호작용에 대한 계산으로서 사용된다. 모노크로메타로부터 쉽게 측정되어지는 변수 (빨간 날개 최대값의 이동과 파란 날개 최대값의 이동)로부터 나트륨-수은 방전에서의 나트륨, 수은 압력을 구하는데 유용하고 편리한 식을 유도하였고 이를 이용하여 400W 나트륨등의 나트륨 분압을 구하였다.

  • PDF

Development of An Electronic Ballast for High pressure Sodium Lamp (고압나트륨램프용 전자식 안정기 개발)

  • 최현배;이진우
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 1998.11a
    • /
    • pp.21-22
    • /
    • 1998
  • 본 논문에서는 100[W] 고압나트륨램프용 전자식 안정기를 제작하여 전기적 특성을 측정하였다. 개발한 전자식 안정기는 입력전압 277[V], 입력전류 357[mA], 역률 98[%], 시동전압 1.1[kV], 관전압 91[V], 관전류 1.0[A]의 특성을 갖는 것으로 측정되었다.

  • PDF

Separation and Recovery of Rare Earth Elements from Phosphor Sludge of Waste Fluorescent Lamp by Pneumatic Classification and Sulfuric Acidic Leaching

  • Takahashi, Touru;Takano, Aketomi;Saitoh, Takayuki;Nagano, Nobuhiro;Hirai, Shinji;Shimakage, Kazuyoshi
    • Proceedings of the IEEK Conference
    • /
    • 2001.10a
    • /
    • pp.421-426
    • /
    • 2001
  • The pneumatic classification and acidic leaching behaviors of phosphor sludge have been examined to establish the recycling system of rare earth components contained in waste fluorescent lamp. At first, separation characteristic of rare earth components and calcium phosphate in phosphor sludge was investigated by pneumatic classification. After pneumatic classification of phosphor sludge, rare earth components were leached in various acidic solutions and sodium hydroxide solution. For recovery of soluble component in leaching solution, rare earth components were separated as hydroxide and oxalate precipitations. The experimental results obtained are summarized as follows: (1) In classification process, rare earth components in phosphor sludge were concentrated to 29.3% from 13.3%, and its yield was 32.9%. (2) In leaching process, sulfuric acid solution was more effective one as a leaching solvent of rare earth component than other solutions. Y and Eu components in phosphor sludge were dissolved in sulfuric acid solution of 1.5 k㏖/㎥, and other rare earth components were rarely dissolved in leaching solution. Leaching degrees of Y and Eu were respectively 92% and 98% in the following optimum leaching conditions; sulfuric acid concentration is 1.5 k㏖/㎥ , leaching temperature 343 K, leaching time 3.6 ks and pulp concentration 30 kg/㎥. (3) Y and Eu components of phosphor sludge contained in waste fluorescent lamp were, effectively recovered by three processes of pneumatic classification, sulfuric acid leaching and oxalate precipitation methods. Their recovery was finally about 65 %, and its purity was 98.2%.

  • PDF

A COMPARISON OF FLUORESCENCE EFFECT OF VARIOUS LIGHT SOURCES IN EARLY ENAMEL CARIES (초기 우식 병소에서 광원에 따른 형광효과 비교)

  • Jeon, Jeong-Hoon;Lee, Nan-Young;Lee, Chang-Seop;Lee, Sang-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.4
    • /
    • pp.611-619
    • /
    • 2005
  • The aim of this study was to apply the quantitative light-induced fluorescence(QLF) and use of fluorescein-enhanced QLF method for quantitative assessment of early enamel demineralization in vitro, comparing effectiveness of light sources : argon laser, halogen lamp, light emitting diode (LED) and plasma arc lamp. Sixty extracted teeth were used, prepared by gentle pumicing and coating in an acid-resistant nail-varnish, except for an exposure to a demineralizing solution. Teeth were removed at regular intervals (24, 48 and 72hrs), air-dried and QLF image were taken. Mineral loss, as measured by difference of optical density, was recorded. For dyeenhanced QLF a 0.075% sodium fluorescein dye was applied after QLF examination and mineral loss was recorded. The following result were obtained : 1. Comparing with mean difference of optical density, plasma arc lamp was higher than other light sources in all group (p<0.05). 2. Comparing each group with mean difference of optical density, there was significant different using plasma are lamp and halogen lamp. 3. For use of dye-enhanced QLF, comparing with mean difference of optical density, plasma arc lamp were higher than other light sources in all group(p<0.05). 4. With this model dye-enhanced QLF compared with QLF in optical density, dye-enhanced QLF was higher than QLF in optical density. From the results presented in this paper, it was concluded that plasma light source was more effective compared with other light source for the detection and the quantification of early enamel caries.

  • PDF

Studies on the Modelling of Controlled Environment in Leaf Vegetable Crops II. Effects of various light sources on the growth (엽채류의 환경제어 모델연구 II. 인공광 조건에 따른 식물의 생육변화)

  • 박권우;신영주;이용범
    • Journal of Bio-Environment Control
    • /
    • v.1 no.2
    • /
    • pp.135-141
    • /
    • 1992
  • Effects of various artificial light sources on the growth of Chinese white cabbage, Chinese flat cabbage, lettuce, garland chrysanthemum, and green perilla were investigated. Plants were grown under different treatments for three weeks. Generally, the growth of artificial light treatment were better than natural daylight(ND). The greatest growth and external quality occurred in high-pressure sodium lamp(HPS). In incandescent lamp(IL), fresh weight was heavy, but marketable quality was poor because of succulent(or spindly) growth. Overall, vitamin C content were no difference among treatments. But relative chlorophyll content was somewhat high in HPS.

  • PDF