• Korean Journal of Medicinal Crop Science
• /
• v.20 no.2
• /
• pp.85-88
• /
• 2012

This study evaluated the germination rate of $Rheum$ $palmatum$ L. in Korea as affected by storage temperature, germination temperature, and a soaking treatment. The germination rate of $R.$ $palmatum$ L. stored at various conditions for 8 weeks was > 60%. The highest germination rate occurred at $25^{\circ}C$. The germination point of $R.$ $palmatum$ L. with soaking was started 1 day after application, and non soaked seeds germinated in 2 days. When $R.$ $palmatum$ L. was soaked with water, the germination rate was lower, but mean germination velocity was the highest. These results may help our understanding of variations in germination characteristics for seeds treated under different germination conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.766-769
• /
• 2000

This study was attempted to investigate granular properties of acorn flours which were prepared by soaked nut and sediment. X-ray diffraction pattern of acorn flour was B type and was not affected by soaking treatment. The principal indices of the pattern were at diffraction angles ($2{\theta}$) of $14.5^{\circ},\;17.2^{\circ},\;19.7^{\circ},\;22.2^{\circ}\;and\;24.5^{\circ}$. The shape of acorn flour was elliptical and some rounded triangular by scanning electron microscope (SEM). The granule size of acorn flours varies from $4\;{\mu}{\textrm}{m}$ to approximately $20\;{\mu}{\textrm}{m}$. although morphology of the acorn flour was not affected, the non-starchy substances of surface was slightly changed by soaking.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.401-406
• /
• 1983

Changes in the soluble sugar content contained in the soybean, soybean milk, soybean curd and soybean whey were determined to investigate the method of reducing the introductions of soluble oligosaccharides like sucrose, raffinose and stachyose, which cause flatulence in human, to soybean curd from soybean by extending the soaking time of soybean. The soybean curd yields according to the extention of the soaking time were also determined. Markedly increased glucose, slightly reduced fructose and sucrose and noticeably reduced raffinose in soybean milk were observed with extended soaking time. Most of sucrose, raffinose and all of maltose were transferred to soybean whey. Gradual increase of soybean curd yields were obtained by extending soaking time within the experimental conditions.

• Mycobiology
• /
• v.39 no.4
• /
• pp.290-298
• /
• 2011

The ability of benzothiadiazole (BTH) and/or humic acid (HA) used as seed soaking to induce systemic resistance against a pathogenic strain of Fusarium oxysporum was examined in four soybean cultivars under greenhouse conditions. Alone and in combination the inducers were able to protect soybean plants against damping-off and wilt diseases compared with check treatment. These results were confirmed under field conditions in two different locations (Minia and New Valley governorates). The tested treatments significantly reduced damping-off and wilt diseases and increased growth parameters, except the number of branches per plant and also increased seed yield. Application of BTH (0.25 g/L) + HA (4 g/L) was the most potent in this respect. Soybean seed soaking in BTH + HA produced the highest activities of the testes of oxidative enzymes followed by BTH in the four soybean cultivars. HA treatment resulted in the lowest increases of these oxidative enzymes. Similar results were obtained with total phenol but HA increased total phenol more than did BTH in all tested cultivars.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2020

The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the 'Samkwang' cultivar. In Step I, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step II, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step III, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.256-264
• /
• 2011

By implementing an analysis on the liquid flame proof agent infiltration of microwave-heated wood under soaking conditions (room temperature soaking, heat soaking), its correlation with wood temperature, and the structure of wood and permeating components after soaking in flame proof agent, which was carried out as basic research in order to improve the fire resistance performance of the wood itself, it is found that the infiltration increases as the microwave heating time increases, while for heat soaking, it is found that high infiltration as well as the stable permeability of flame proof agent is achievable. Also, when the wood temperature is more than $80^{\circ}C$, the infiltration by the flame proof agent increased, and a very even infiltration of flame proof agent was observed, which implies that the liquid flame proof agent has a dependency on temperature change of the wood as a condition to penetrate into the wood. As a result of fine structure analysis, the flame proof agent transfer between cells through pits was considered as a cause to increase the infiltration of flame proof agent, and it is also shown that for heat soaking among the permeating component analysis, as the crystallized flame proof agent around the heartwood and sapwood inner pits increases, the flame proof agent can penetrate into the the heartwood part.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.567-571
• /
• 2005

In this study, the effects of varying the amount of water, soaking time at $25^{\circ}C$ and drying time after soaking at $45^{\circ}C$ on the induction of resveratrol were evaluated to optimize the soaking treatment by response surface methodology (RSM). After response surface regression (RSREG), the second-order polynomial equation was fitted to the experimental data. The analysis of variance showed that the model appeared to be adequate $(R^2=0.9547)$ with no significant lack of fit (p>0.1). From statistical analysis, amount of water and soaking time were found to be significant factors. On the other hand, drying time was not significant. Ridge analysis showed that the optimized parameters were $67.15\%$ for amount of water, 19.58 hr for soaking time, 65.56 hr for drying time. It was confirmed that resveratrol content was increased from $0.1\;{\mu}g/g$ to $4.55\;{\mu}g/g$ under the optimized conditions. In addition, the experimental values at the optimized condition agreed with values predicted by ridge analysis. The analytical method validation parameters such as accuracy, precision, and specificity were calculated to ensure the method's validity.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.575-582
• /
• 1989

An investigation was carried out to improve the quality and yield of barley tea(water extracts) by modifying the roasting method. The modified methods employed were crushing the barley into 4-10 parts and soaking in water at room temperature for 20 minutes followed by roasting (light brown or dark brown) at $250^{\circ}C$ before boiling with water. The varieties of barley used for this study were Ol-bori(with hulls) and Youngsan-bori(without hulls) and the qualities measured were the physical, chemical and sensory characteristics of roasted barley and its extracts. The results showed that the higher solid yields in barley tea was obtained with an increase in soaking and roasting time. The solid yields increased rapidly with extraction time in boiling water until 30 minutes and then slowed down thereafter. However the intrinsic viscosity of barley tea was reduced by increase in soaking and roasting time. The color of barley tea expressed as Hunter L, a, b values showed that lower L value and higher a and b values were measured for those prepared without soaking and with more extensive roasting. Organoleptic evaluation clearly showed that the sensory quality of barley tea was significantly improved in intensity of odor and taste by crushing, soaking and dark brown roasting.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.36-42
• /
• 1982

An investigation on optimum processing conditions for meaty textured fish protein concentrate (MT-FPC) was carried out with the fish meat of filefish, Navodon modestus, and sandfish. Arctoscopus japonicus. The processing conditions were determined by the lipid content and the rehydration capacity of MT-FPC. The optimum pH and sodium chloride content of fish meat were 8.0 and 1.0%, respectively. The most effective soaking conditions were: soaking time in chilled ethanol was 15 min for both filefish and sandfish; amount of chilled ethanol, 3 volumes and 4 volumes for filefish and sandfish, respectively; temperature of chilled ethanol, $25 ^{\circ}C$ for both filefish and sandfish; soaking time in boiling ethanol, 15 and 25 min for filefish and sandfish, respectively; amount of boiling ethanol, 2 and 4 volumes for filefish and sandfish, respectively; and number of snaking in boiling ethanol, 2 and 4 times for filefish and sandfish, respectively. Yields of the product to the minced meat weight, the contents of protein and lipid in MT-FPC prepared from filefish were 13.7%, 84.5% and 0.2%, and those from sandfish were 12.5%, 84.2% and 1.1%, respectively.

• Journal of Welding and Joining
• /
• v.8 no.2
• /
• pp.70-79
• /
• 1990

Stainless clad steels were made through hot rolling process. Backing plates employed in this study were HSLA steel and mild steel. The shear bond strength increased with an increase of the soaking temperature and time. It was also found that the shear bond strength increased with an increase of the reduction ratio. The threshold deformation was observed to be 20% and 10% respectively when the soaking conditions of 15 min. at 900.deg. C and 30 min. at 1000.deg. C were applied. Either the rolling or the transverse direction did not give any significant difference in the shear bond strength. Stainless steel-HSLA steel was superior to stainless steel-mild steel in the same range of magnitude. Because the above experimental results were in contrary to the existing mechanisms, the new model was proposed to describe the bonding mechanism and the void formation.