• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.507-515
• /
• 2012

Recently RFID(Radio Frequency Identification) technology advances in wireless communication technologies are bringing new challenges. But RFID tag packaging technology has been lagging compared to the demand, so this technology is being required to improve productivity and reliability. This study is performed on FMEA, reliability at development level and analysis failure mode through environment and mechanical test. Robust design is applied to search the optimized condition of factor and RFID tag packaging should be satisfied with high MTTF.

• 대한음성언어의학회:학술대회논문집
• /
• 대한음성언어학회 2017년도 제46차 춘계학술대회
• /
• pp.6-9
• /
• 2017

• The Korean Journal of Pain
• /
• 제12권1호
• /
• pp.162-167
• /
• 1999

We have observed discitis developed after Intradiscal radiofrequency thermocoagulation in a patient with chronic discogenic low back pain. Recently, it is becoming more common that pain-managers perform disc-manipulation or, a nerve block after penetrating a disc, so postprocedural infection of disc can be a problem. To prevent discitis, very carefull attention must be given to ensure aseptic conditions during this procedure. However, if it occurs, it needs to be treated properly. In this case, a good result was obtained by treatment with absolute bed rest, pain management, and antibiotics.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.133-140
• /
• 2013

This paper presents an overview of the concepts of optimal feeder design in relation to the loading of bulk solids for Automatic filling system that should be control the amount of goods and packaging to seal. Feeder modular device, important parts of the package, so in order to perform a conceptual design optimization techniques are applied in two steps. First of all derive the problems through structural analysis for the conceptual model of vibrating feeder. Secondly derive reasonable design model based on the results of the structural analysis of modified boundary shape and then verify it. The proposed system has the following goal that is satisfies the dynamic stability with minimum weight and optimization of the shape. As a result, the weight reduction of feeder is 2.1% and 7% increase in the natural frequency.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제16권2호
• /
• pp.137-149
• /
• 2012

We propose an efficient method to measure the insurance risk of causality insurance companies by using the CreditRisk+ methodology. This method is superior to previous methods in several aspects. Its computation speed is very fast and the input data form is simple. It is able to aggregate both credit risk and insurance risk, so the insurance company can manage the risk in combined manner. In this paper, we propose a mathematical method to obtain the aggregate loss distribution of portfolios having correlation among products or business lines as a general case, and then suggest its implementation algorithm. Finally we apply this method to the real data from Korea Insurance Development Institute (KIDI) and discuss its availability to real applications.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.564-568
• /
• 2014

We present a 25-Gb/s optical transmitter composed of a Si ring modulator and CMOS driver circuit. The Si ring modulator is realized with 220-nm Si-on-insulator process and the driver circuit with 65-nm CMOS process. The modulator and the driver are hybrid-integrated on the printed circuit board with bonding wires. The driver is designed so that the parasitic bonding wire inductance provides enhanced driver bandwidth. The transmitter successfully demonstrates 25-Gb/s operation.

• 한국지능시스템학회논문지
• /
• 제11권8호
• /
• pp.746-753
• /
• 2001

In this paper, we review the basic concept of Evolvable Hardware first. And we examine genetic algorithm processor and hardware reconfiguration method and implementation. By considering complexity and performance of hardware at the same time, we design genetic algorithm processor using modularization and parallel processing method. And we design frame that has connection structure and logic block on FPGA, and embody reconfigurable hardware that do so that this frame may be reconstructed by RAM. Also we implemented ECANS that information processing system such as living creatures'brain using this hardware reconfiguration method. And we apply ECANS which is implemented using the concept of Evolvable Hardware to time-series prediction problem in order to verify the effectiveness.

• Tuberculosis and Respiratory Diseases
• /
• 제78권4호
• /
• pp.423-427
• /
• 2015

Fat embolism syndrome (FES) is a clinical manifestation that consists of multiple organ dysfunction due to fat emboli. FES occurs as a complication after trauma or procedures such as surgery. The diagnostic criteria of FES have not yet been established, so clinical criteria are used for its diagnosis. The clinical course of acute fulminant FES can be rapid. Liposuction surgery, in which adipocytes are mechanically disrupted, is one cause of FES. As the number of liposuction surgeries increases, clinicians should be aware of the possibility of FES. This was the first report of a case of acute fulminant FES with severe acute respiratory distress syndrome after liposuction surgery, in Korea.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.411-415
• /
• 2010

Conventional Augmented Reality has used data gloves or markers for smooth interaction between objects and background. This causes inconvenience of use and lower immersion. To build up immersion in Augmented Reality, additional input devices must be removed. For this purpose, accurate recognition of space coordinates is needed even with no attachment of markers. This paper proposes a method to create virtual space coordinates for interaction without wearing additional input devices so as to improve immersion in Augmented Reality. The acquired image was projected to 2D space and vanishing lines were extracted to calculate the virtual space coordinates. Then the sizes of the inserted objects were varied in accordance with the size of the virtual coordinates area based on the image projected onto the 2D coordinates. This resulted in improved immersion. This method can increase the efficiency of object creation by excluding the use of a 3D modeler for creation of 3D objects.

• 중국학논총
• /
• 제66호
• /
• pp.161-188
• /
• 2020

The purpose of this paper is to analyze the debate on the Lewisian turning point in China. Despite the heated debate and accumulating research results both inside and outside China, the results showed a very complex spectrum. Different results were presented depending on which criteria the researcher selected, which analytical tools were used, and which data were utilized. Territory of China is vast, and the differences in economic basement and development stages between regions are not only severe, but also the economic gap among areas in a region is big. Therefore, it is difficult to have a significant meaning in analyzing the Lewisian Turning Point China as a whole. In addition, China's industrial production and labor force structure remain very unbalanced. This can be said to be due to the fact that the allocation and relocation of labor force according to the stage of economic development has not been achieved reasonably, and so it confuses the task of determining whether the Lewis Turning Point has arrived of not.