• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.132-133
• /
• 2023

라즈베리파이를 이용하여 폭설로 인한 비닐하우스 붕괴 위험을 감지하고 이를 예방하는 장치를 구현하였다. 비닐하우스 상부에 설치된 압력센서를 이용해 눈이 쌓였음을 판단하고 일정량 이상이 쌓였다고 판단되면 서보모터를 이용한 제설기를 작동시킨다. 사용자는 애플리케이션을 통하여 회원가입, 로그인을 할 수 있고 제설기의 자동 또는 수동제어 여부를 결정할 수 있다.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1497-1503
• /
• 2023

To address challenges in classifying clouds and snow cover when calculating ground reflectance in Near-UltraViolet (UV) wavelengths, this study introduces a methodology that combines cloud data from the Geostationary Environmental Monitoring Spectrometer (GEMS) and the Advanced Meteorological Imager (AMI)satellites for snow cover analysis. The proposed approach aims to enhance the quality of surface reflectance calculations, and combined cloud data were generated by integrating GEMS cloud data with AMI cloud detection data. When applied to compute GEMS surface reflectance, this fusion approach significantly mitigated underestimation issues compared to using only GEMS cloud data in snow-covered regions, resulting in an approximately 17% improvement across the entire observational area. The findings of this study highlight the potential to address persistent underestimation challenges in snow areas by employing fused cloud data, consequently enhancing the accuracy of other Level-2 products based on improved surface reflectivity.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.373-382
• /
• 2016

Under the Agricultural technology is influenced from climate that is requisite of seasonal. So this system will cover the problems and develop the agricultural industry as well. So far, the agricultural industry is developing however, it has the points of the weakness because of natural disasters such as wind risk and heavy snow. This paper designs system to change vinyl on the greenhouse. This is a preliminary study for the real-time feedback control of greenhouse. The study developed a wireless IoT sensor system based on authentic technology capacities, to integrate with the protected horticulture Management System. These system was used to evaluate the levels of the snow cover and wind through IoT devices. The existing greenhouse uses the warm water to clear snow or to change methods. This system will recover by changing the vinyl which is covered outside of the greenhouse. The points of the system is changing vinyl to spin pipe. It is contained extra vinyl. The effects of this system are minimized labor protected crops from natural disasters. For this purpose, the study first developed a wireless IoT sensor unit that integrates an MEMS device and wireless communication module. Also, the study developed an operating program that enables real-time response measurement. It will help operational and maintenance greenhouse as a result.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.113-117
• /
• 2020

Images were taken under various weather such as rain, haze, snow often show low visibility, which can dramatically decrease accuracy of some tasks in computer vision: object detection, segmentation. Besides, previous work to enhance image usually downsample the image to receive consistency features but have not yet good upsample algorithm to recover original size. So, in this research, we jointly implement removal streak in heavy rain image and super resolution using a deep network. We put forth a 2-stage network: a multi-model network followed by a refinement network. The first stage using rain formula in the single image and two operation layers (addition, multiplication) removes rain streak and noise to get clean image in low resolution. The second stage uses refinement network to recover damaged background information as well as upsample, and receive high resolution image. Our method improves visual quality image, gains accuracy in human action recognition task in datasets. Extensive experiments show that our network outperforms the state of the art (SoTA) methods.

• Corrosion Science and Technology
• /
• v.15 no.1
• /
• pp.28-37
• /
• 2016

Due to the increased construction of offshore concrete structures and the use of de-icing salts for the purpose of snow removal, the needs for the development of anti-corrosive concrete are increasing. To solve these problems, an evaluation of the mechanical and durability properties for concrete were conducted by mixing modified-sulfur as 0 %, 5 %, 10 %, 15 % cement weight ratio. Both strengths and the properties affecting durability such as water absorption coefficient, chloride ion permeability, accelerated carbonation resistance, rapid freezing and thawing, and chemical resistance were evaluated. All evaluations performed were according to the test specifications associated KS. The results indicate that mixing of modified-sulfur lowed chloride ion permeability and improved chemical resistance.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.362-363
• /
• 2017

최근 기후변화에 따라 여름철 태풍, 호우와 겨울철 대설, 한파 등의 기상재난이 증가하고 있다. 대설재난은 교통, 건물, 시설물 등에 다양한 피해를 발생시키기 때문에 신속한 대처가 필요하다. 대설재난이 도시안전에 영향을 주고 있으나 우리나라의 대설재난 대처는 미흡하고, 정책 연구도 부족한 상황이다. 본 연구는 대설재난이 발생할 때 신속한 도로 제설을 위하여 제설차량과 장비에 GPS 기술을 활용한 사례를 분석하고, 시사점을 도출한다. 도로 제설장비에 GPS 장비를 부착하면 긴급 상황시 제설차량과 장비의 위치를 파악하여 인근지역의 도로 제설을 응원할 수 있다. 본 연구의 사례 분석은 향후 지자체 제설장비의 효율적 이용을 위해 활용될 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.813-819
• /
• 2006

Skid Resistance is a index to represent the friction between tire and road surface, which influences driving safety. Skid resistance varies with the conditions of tire, abrasion of road surface, vehicle speed, drying, wet and freezing condition of road surfaces. Especially, freezing occurs when temperature drops below $0^{\circ}C$ followed by snow or rain causes decrease of skid resistance. To recover the decreased skid resistance deicing work is applied. As a results of deicing works, freezing condition is changed into wet condition. However the wet road surfaces containing the remaining deicings agents may not show the skid resistance of normal wet condition. In this study, skid resistances in the condition of freezing, deicing process and deicing agents remained after snow-removal are evaluated. The test results, skid resistance recover quickly when Pre-wetted salt spreading and NaCl was used as deicing method. Skid resistance of Deicing agents remained on the road surface showed that concrete is higher than asphalt. superior effect. Recovery rate of skid resistance by comparison wet condition is 54~80%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.23-32
• /
• 2022

Although PSCB girder bridges account for 4% of the bridges in use on highways, they do not account for much, but 98% of PSCB girder bridges are 1^st type and 2^nd type of bridge. Also, the total length of the PSCB girder bridge is 16% (192km) of the total length of the highway bridge. Thus, the PSCB girder bridge can be one of the bridge types where maintenance is important. In order to analyze the damage types of PSCB girder bridges, a detailed analysis was conducted by selecting 62 places (477 spans) precision safety diagnosis reports considering ratio of the construction method and snow removal environment exposure class. Analysis of report and a field investigation was conducted, and as a result, most of the causes of deterioration damage were caused by rainwater (salt water) flowing into the bridge pavement soaking in between the top flange and the interface. After concrete slab deteriorate occurred then bridge pavement cracking and breaking increased and exfoliation of concrete occurred by corrosion and expansion of the reinforcing bars occurred. In addition, the cause of cracks in the longitudinal direction on the bottom of the top flange is considered to be cracks caused by restrained drying shrinkage. In conclusion, for reasonable maintenance considering the characteristics of PSCB girder bridges, it should be suggested in the design aspect that restrained drying shrinkage crack on top flange. Also, it is believed that differentiated maintenance method should be proposed according to snow removal environment exposure class.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.38-48
• /
• 2010

Adverse weather (e.g. strong winds, snow and ice) will probably appear as a more serious and frequent threat to road traffic than in clear climate. Another consequence of climate change with a natural disastrous on road traffic is respond to traffic accident more the large and high-rise bridge zone, tunnel zone, inclined plane zone and de-icing zone than any other zone, which in turn calls for continuous adaption of monitoring procedures. Accident mitigating measures against this accident category may consist of intense winter maintenance, the use of road weather information systems for data collection and early warnings, road surveillance and traffic control. While hazard from reduced road friction due to snow and ice may be eliminated by snow removal and de-icing measures, the effect of strong winds on road traffic are not easily avoided. The purpose of the study described here, was to design of amber information the relationship between traffic safety, weather, user information on road weather and driving conditions in local-scale Geographic. The most applications are the optimization of the amber information definition, improvements to road surveillance, road weather monitoring and improved accuracy of user information delivery. Also, statistics on wind gust, surface condition, vehicle category and other relevant parameters for wind induced accidents provide basis for traffic control, early warning policies and driver education for improved road safety at bad weather-exposed locations.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.642-648
• /
• 2009

Purpose: Hexadactyly without thumb is a rare congenital anomaly of the hand where six triphalangeal digits are symmetrically distributed without thumb. Contrary to mirror hands, triphalangeal six digits are symmetrically distributed on each side at the midline with well - differentiated carpal bones, extensor tendons, one ulnar and one radius. The authors developed a new surgical technique based on a three - dimensional concept to correct the hexadactyly and applied to 2 cases of hexadactyly with good functional and aesthetic results. Here we document the surgical technique and its result. Methods: A 16 month old male patient visited our clinic with chief complaints of bilateral hexadactyly deformity. On physical examination most radial first and second digits showed no opposition and adduction motion on both side hands. Radiography showed 6 triphalangeal digits with normal development of carpal, radial and ulnar bone. Right side abnormality was corrected by removal of most radial side extra - digit, rotation and migration of 2nd ray to thumb position and creation of 1st web by transposing a mid - palm based rectangular palmar flap as in Snow & Littler procedure which has been being applied for correction of 1st web syndactyly in cleft hand deformity. Seven months later, left side abnormality was also corrected with the same procedure. Results: Postoperative appearances of the both hands were satisfactory. Flexion, extension, opposition and grasping were possible with the pollicized 2nd ray. Pinching power was 3.0 kg 15 months after surgery and 2.5 kg 22 months after in right hand respectively. Conclusion: In correction of hexadactyly deformity, satisfactory aesthetic and relevant functional results can be expected with authors' newly developed technique: removal of most radial digit, rotation and migration of 2nd digit to thumb position as well as creation of the 1st web space by transposition of mid - palm based rectangular flap.