• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.215-219
• /
• 2007

In this work, the indium zinc oxide (IZO) films had been deposited on the glass substrate coated with the SiO film. Based on a comparative investigation of the IZO monolayer and IZO/SiO multilayer, it is shown that the thickness of SiO film has a great effect on the mechanical properties of the thin films. The AFM images of the IZO thin film included the SiO film were shown smoother surfaces than monolayer. Resistivity was in inverse proportion to Mobility. If it deposited the SiO film on the substrate, the layer of change was generated between two layer(SiO and substrate). The layer of change influenced resistance because of oxygen content was more than the IZO monolayer.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.333-339
• /
• 1999

$RuO_2$ thin films were prepared with various deposition conditions by rf magnetron sputtering. The films were annealed in vacuum, air, and air-vacuum, after that, the structural and electrical properties of the films were investigated. As the substrate temperature increases, the preferred orientation of the films changes from (101) to (200), and the grain size increases; especially, at $500^{\circ}C$, the size considerably increases. The preferred orientation of the films changes from (200) to (101) and the roughness of surface increase with the increase in oxygen partial pressure. The lowest value of resistivity of $RuO_2$ we prepared is $1.5\times 10^{-5}\Omega\codt\textrm{cm}$ at the conditions of $400^{\circ}C$ and 10% of oxygen partial pressure. After the processes of annealing, the films deposited at $400^{\circ}C$ and a oxygen partial pressure of 10% were relatively stable. The films deposited at $500^{\circ}C$ have denser structure and smoother surface when the films are annealed in vacuum after annealing in air.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.158-165
• /
• 2008

Hydraulic power steering system has been adopted in seniority passenger and commercial vehicle system for an easy maneuverability and a smoother ride. In this study, hydraulic power steering system analysis model which includes hydraulics and mechanical sub-systems was developed using commercial software, AMESim in order to predict characteristics for various steering components. Each component which constructs system was modeled and verified by experimentally obtained characteristics curves of each components. The agreement between simulation and experimental results shows the validity of the simulation model. The parameter sensitivity analysis such as valve opening area, torsional stiffness for system design are carried out by the analysis and experimental method.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.5
• /
• pp.38-44
• /
• 1992

In this paper, electrification pipe modeled on the oil path that insulating oil flow in the high power transformer is manufactured in order to prevent the accident cause from streaming electrification generated when insulating off flow at a solid-liquid interface, and the streaming current is measured and analyzed according to the shape of oil path in electrification pipe. From the result of this study, the streaming current increases linearly with increasing of a oil velocity and it increases at lower temperature and decreases at higher temperature than [$46^{\circ}C$]. The smoother the flow of insulating oil is the more the streaming current decreases.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.226-234
• /
• 2004

A rapid Prototyping system that laser-cuts and laminates thick layers can fabricate 3D objects promptly with a variety of materials. Building such a system must consider the surface distortions due to both vertical-cut layers and triangular surfaces. We developed a tangential layer-cutting algorithm by rearranging tangential lines such that they reconstruct 3D surfaces more closely and also constitute smoother laser trajectories. An energy function that reflects the surface-closeness with the tangential lines was formulated and then the energy was minimized by a gradient descent method. Since this simple method tends to cause many local minima for complex 3D objects, we tried to solve this problem by adding a simulated annealing process to the proposed method. To view and manipulate 3D objects, we also implemented a 3D visual environment. Under this environment, experiments on various 3D objects showed that our algorithm effectively approximates 3D surfaces and makes laser-trajectory feasibly smooth.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.43-47
• /
• 1999

Instead of using KrF excimer lasers( ${\lambda}$ = 248 nm) in depositing oxide thin films, as in the most of the laboratories in Korea, we have used an ArF excimer laser( ${\lambda}$ = 197 nm) which has a shorter wavelength. By using a beam which has a shorter wavelength, we could obtain higher quality and smoother surface YBCO thin films. We fabricated YBCO thin films with the various substrate temperature conditions and analyzed the characteristics of these films. We also studied the charateristics of the films fabricated under the various conditions of the power of laser and the oxygen pressure. The characterization tools used in this work were a transport measurement setup, an XRD , and a SEM. We also fabricated STO/YBCO multilayers to use in SFQ devices fabrication. XRD patterns of the multilayers showed that the multilayer films were grown epitaxially.

• Communications for Statistical Applications and Methods
• /
• v.16 no.3
• /
• pp.519-528
• /
• 2009

This paper deals with nonparametric estimation of discontinuous regression curve. Quite number of researches about this topic have been done. These researches are classified into two categories, the indirect approach and direct approach. The major goal of the indirect approach is to obtain good estimates of jump locations, whereas the major goal of the direct approach is to obtain overall good estimate of the regression curve. Thus it seems that two approaches are quite different in nature, so people say that the comparison of two approaches does not make much sense. Therefore, a thorough comparison of them is lacking. However, even though the main issue of the indirect approach is the estimation of jump locations, it is too obvious that we have an estimate of regression curve as the subsidiary result. The point is whether the subsidiary result of the indirect approach is as good as the main result of the direct approach. The performance of two approaches is compared through a simulation study and it turns out that the indirect approach is a very competitive tool for estimating discontinuous regression curve itself.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.139-142
• /
• 2005

[ $ZrO_2$ ] gate dielectric thin films were deposited by radio frequency (rf)-magnetron sputtering and its structure, surface morphology and electrical peoperties were studied. As the oxygen flow rate increases, the surface becomes smoother. The experimental results indicate that a high temperature annealing is desirable since it improves the electrical properties of the $ZrO_2$ gate dielectric thin films by decreasing the number of interfacial traps at the $ZrO_2/Si$ interface. The carrier transport mechanism is dominated by the thermionic emission.

• Korean Journal of Materials Research
• /
• v.17 no.6
• /
• pp.303-307
• /
• 2007

ZnO thin films were prepared by pulsed laser deposition on amorphous fused silica substrates at different ambient $O_2$ pressures varying from 0.5 to 500 mTorr, to observe the effect of ambient gas on their crystalline structure, morphology and optical properties. Results of X-ray diffraction, scanning electron microscopy, atomic force microscopy and photoluminescence studies showed that crystallinity, surface features and optical properties of the films significantly depended on the oxygen background pressure during growth. A low oxygen pressure (0.5 mTorr) seems to be suitable for the growth of highly c-axis oriented and smoother films possessing a superior luminescent property. The films grown at the higher $O_2$ pressures (50-500 mTorr) were found to have many defects probably due to an excessive incorporation of oxygen into ZnO lattice. We speculate that the film crystallinity could be affected by the kinetics of atomic arrangement during deposition at the higher oxygen pressures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.