• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.87-88
• /
• 2008

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum$(Alq_3)$/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of TPD materials. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of 2.5 $\AA$/s. When the deposition rate of TPD increased from 1.5 to 3.0 $\AA$/s, we found that the average roughness is rather smoother, external quantum efficiency is superior to the others when the deposition rate of TPD is 2.5 $\AA$/s. Compared to the ones from the devices made with the deposition rate of TPD 3.0 $\AA$/s, the external quantum efficiency was improved by a factor of eight.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.648-658
• /
• 2018

Regarding the fact that wind power forecast accuracy is gradually improved as time is approaching, this paper proposes a two-stage rolling dispatch approach based on model predictive control (MPC), which contains an intra-day rolling optimal scheme and a real-time rolling base point tracing scheme. The scheduled output of the intra-day rolling scheme is set as the reference output, and the real-time rolling scheme is based on MPC which includes the leading rolling optimization and lagging feedback correction strategy. On the basis of the latest measured thermal unit output feedback, the closed-loop optimization is formed to correct the power deviation timely, making the unit output smoother, thus reducing the costs of power adjustment and promoting wind power accommodation. We adopt chance constraint to describe forecasts uncertainty. Then for reflecting the increasing prediction precision as well as the power dispatcher's rising expected satisfaction degree with reliable system operation, we set the confidence level of reserve constraints at different timescales as the incremental vector. The expectation of up/down reserve shortage is proposed to assess the adequacy of the upward/downward reserve. The studies executed on the modified IEEE RTS system demonstrate the effectiveness of the proposed approach.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권4호
• /
• pp.175-183
• /
• 2002

In this paper, the surface modification effect of self-assembled monolayer(SAM) of 1-dodecanethiol [$CH_3$($CH_2$)$_{11}$SH] used as an anti-adhesive film in micromolding process was studied. Monolayers of 1-dodecanethiol[$CH_3$(CH$_2$)$_{11}$SH] were obtained by immersing a metal place in pure 1-dodecanethiol. SAM film on the nickel plate has been examined by using X-ray photoelectron spectroscopy(XPS). The focus has been placed on S-Ni bonding. From the XPS analysis, sulfur atoms were detected from the SAM film as a chemical composition of S-Ni. In order to measure an adhesion force of the SAM-coated nickel surface, atomic force microscopy(AFM) was used in force-distance mode, which whows the micro-adhesive force on solid surface. It was shown that adhesion forces measured from the SAM-coated nickel surface and the Ni surface without SAM coating were 3.52nN and 5.32nN, respectively. In order to investigate the effect of SAM coating on the surface foughness the replica in demolding process, hot embossing experiments were performed using a SAM-coated nickel master and a nickel master without SAM coating. Surface roughness of replica from the SAM-coated master showed 25nm and that of replica from master without SAM coating was 35nm. The smoother surface roughness of the replica from the SAM-coated, master is believed to result from reduction in the adhesion forces.ces.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.11-18
• /
• 2014

아산화질소/에탄올 추진제 조합을 사용하는 50 N급 추력기 분사기 인접부에서 shadowgraph 기법을 사용하여 연소 유동장을 가시화하였다. 설계 작동조건에서 폭발성 점화가 일어났으며, 급격히 팽창하는 연소가스에 의해 순간적으로 소염되는 현상이 관찰되었다. 최초 점화로부터 약 83 ms 뒤 추진제 분무는 재점화 되었으며, 그로부터 약 23 ms 후 화염이 안정화되는 것이 관찰되었다. 동일한 시퀀스에서 설계 조건보다 산화제 유량을 증가시킨 경우, 소염 현상 없이 완만한 연소 압력 과도 특성을 보였으며 최초 점화로부터 약 17 ms이내에 화염 안정화가 이루어졌다. 이는 점화 직전의 연소기 내부 미연 추진제 혼합 향상에 의한 것으로 생각되었다.

• Computers and Concrete
• /
• 제2권1호
• /
• pp.79-96
• /
• 2005

The use of high-strength concrete (HSC) has significantly increased over the last decade, especially in offshore structures, long-span bridges, and tall buildings. The behavior of such concrete is noticeably different from that of normal-strength concrete (NSC) due to its different microstructure and mode of failure. In particular, the shear capacity of structural members made of HSC is a concern and must be carefully evaluated. The shear fracture surface in HSC members is usually trans-granular (propagates across coarse aggregates) and is therefore smoother than that in NSC members, which reduces the effect of shear transfer mechanisms through aggregate interlock across cracks, thus reducing the ultimate shear strength. Current code provisions for shear design are mainly based on experimental results obtained on NSC members having compressive strength of up to 50MPa. The validity of such methods to calculate the shear strength of HSC members is still questionable. In this study, a new approach based on artificial neural networks (ANNs) was used to predict the shear capacity of NSC and HSC beams without shear reinforcement. Shear capacities predicted by the ANN model were compared to those of five other methods commonly used in shear investigations: the ACI method, the CSA simplified method, Response 2000, Eurocode-2, and Zsutty's method. A sensitivity analysis was conducted to evaluate the ability of ANNs to capture the effect of main shear design parameters (concrete compressive strength, amount of longitudinal reinforcement, beam size, and shear span to depth ratio) on the shear capacity of reinforced NSC and HSC beams. It was found that the ANN model outperformed all other considered methods, providing more accurate results of shear capacity, and better capturing the effect of basic shear design parameters. Therefore, it offers an efficient alternative to evaluate the shear capacity of NSC and HSC members without stirrups.

• 한국결정성장학회지
• /
• 제12권1호
• /
• pp.27-30
• /
• 2002

Liquid phase epitaxy(LPE)법을 이용하여 ZnO co-doped Er:$LiNbO_3$, 단결정 박막을 $LiNbO_3$ (001) 기판 위에 성장시켰다. ZnO co-doped Er:$LiNbO_3$박막 성장의 초기 융액은 첨가제 $Er_2O_3$ 농도를 1 mol%로 고정시키고 ZnO 농도를 3,5 mol%로 조절하였다. ZnO co-doped Er :$LiNbO_3$박막의 결정성은 $LiNbO_3$ 기판보다 더 우수하였다. ZnO 5mol% 첨가한 경우 박막의 표면에는 수직한 방향과 평행한 방향으로 모두 압축응력이 작용하고 있었다. 또한 ZnO 3mol% 첨가된 Er :$LiNbO_3$박막의 표면은 원래의 $LiNbO_3$기판보다 더 평탄하였다

• 대한전자공학회논문지SD
• /
• 제41권3호
• /
• pp.9-14
• /
• 2004

본 논문에서는 압저항 압력센서 응용을 위한 최적의 멤브레인 구조를 만들기 위하여 tetramethylammonium hydroxide (TMAH)/ammonium persulfate (AP)/isopropyl alcoho 1(IPA) 용액의 Si 이방성 식각 특성을 연구하였다. 독성이 적고 CMOS 공정과의 높은 호환성 때문에 TMAH를 Si 이방성 식각용액으로 사용하였다. 식각온도, TMAH농도 및 식각시간에 따른 Si 식각률의 변화를 측정하였다. 식각온도를 증가 시키고 TMAH농도를 감소시킴에 따라 Si 식각률은 증가한 반면에 (100)면에 hillock 이 생겨 식각표면의 평탄도가 감소하였다. TMAH 에 IPA 용액을 첨가하면 식각표면의 평탄도를 증가 시키나 Si의 식각률을 감소 시켰다. 그러나, TMAH 에 AP 용액을 첨가하면 Si의 식각률과 식각표면의 평탄도 모두를 증가시켰다. 또한 시간당의 AP 첨가 횟수를 증가시킴으로서 Si 식각률을 최대화시킬 수 있었다. TMAH/AP 용액의 최적의 Si 식각조건을 적용하여 한변의 길이가 100∼400㎛이고 두께가 20㎛인 정사각형 모양의 Si 멤브레인을 성공적으로 제작하였다.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.351-359
• /
• 2003

Statement of problem: Regardless of any restoration, most of case, we used in screw connection between abutment and implant. For this reason, implant screw loosening has been remained problem in restorative practices. Purpose: The purpose of this study was to compare surface of coated/plated screw with titanium and gold alloy screw and to evaluate physical property of coated/plated material after scratch test in FESEM investigation Material and methods: GoldTite, titanium screw provided by 3i (Implant Innovation, USA) and TorqTite, titanium screw by Steri-Oss (Nobel Biocare, USA) and gold screw, titanium screw by AVANA (Osstem Implant, korea) - were selected for this study. Each abutment screw surface was observed at 100 times, and then screw crest, root, and slope were done more detailed numerical value, at 1000 times with FESEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, micro-diamond scratch the surface of head region was made at constant load and then was observed central region and periphery of fine trace through 1000 times with FESEM. Results: The surface of GoldTite was smoother than that of other kinds of screw and had abundant ductility and malleability compared with titanium and gold screw. The scratch test also showed that teflon particles were exfoliated easily in screw coated with teflon. Titanium screw had a rough surface and low ductility. Conclusion: It was recommended that the clinical use of gold-plated screw would prevent a screw from loosening. CLINICAL IMPLICATIONS Clinical use of gold-plated screw would prevent a screw from loosening because it had abundant ductility and malleability compared with titanium and gold screw.

• 대한화학회지
• /
• 제40권6호
• /
• pp.394-400
• /
• 1996

결합성 사슬이합체를 형성할 수 있는 올리고펩티드-$(HPPHPPP)_n$-(H: 소수성 아미노산, P: 친수성 아미노산)는 온도, 수소이온 농도, 이온세기, 변성시약 등에 의해 구조적인 변화가 가능하다. 본 연구에서는 변성시약과 온도에 의한 올리고펩티드의 전이 현상을 이론적으로 고찰하였다. 사슬이합체로는 올리고펩티드20R, 변성시약으로는 구아니듐-염산을 사용하였다(20R에는 사슬 내의 정전기적 반발력이 10개가 존재하고, 사슬사이의 정전기적 반발력이 10개가 존재한다). 변성 시약에 의한 올리고펩티드의 나선에서 코일로의 전이는 급격한 것으로 보아, 변성이 일어나는 전이상태에서 올리고펩티드들은 완전한 나선구조와 무질서한 코일구조로만 되어있다. 반면에 온도에 의한 전이는 변성시약에 의한 전이보다 완만하게 일어난다. 낮은 온도에서 긴 나선 구조를 가지는 올리고펩티드가 짧은 나선 구조를 가지는 것보다 다량으로 존재한다. 온도가 증가할수록 부분적으로 변성된 분자들의 몰분율이 증가하여, 전이가 일어나는 온도에서 부분적으로 변성된 올리고펩티드가 널리 분포되어 있다.

• 한국식생활문화학회지
• /
• 제29권3호
• /
• pp.298-306
• /
• 2014

The purpose of this study was to investigate the quality characteristics of steamed bread using mixed flour containing bamboo leaf and lotus leaf powders. Properties of the steamed breads were tested by colorimeter, water activity, rheometer, SEM, and sensory tests. The L values and a values were higher in steamed bread with bamboo leaf powder. On the other hand, the b values of streamed bread with bamboo leaf powder were lower than lotus leaf powder. During storage, the hardness of steamed bread with bamboo leaf and lotus leaf powders increased control. Furthermore, steamed bread with lotus leaf powder showed hardness than bamboo leaf powder. The springiness of all steamed breads decreased with storage, and steamed breads with bamboo leaf powder showed lower values than lotus leaf powder. The cohesiveness of the control was the highest, and all samples showed significant differences each other. The gumminess of the control was higher than steamed bread with bamboo leaf and lotus leaf powders. Moreover, longer storage time yielded higher gumminess. control relatively smoother surface than that of 1% bamboo leaf powder. The steamed bread with lotus leaf powder had a rougher surface than bamboo leaf powder. sensory characteristics of steamed bread, green color of the samples with bamboo leaf powder was darker than lotus leaf powder. Leaf odor was similar throughout. Freshness of steamed bread containing 1% bamboo leaf powder the highest. The overall acceptability of consumer acceptance was the control, followed by steamed bread containing 1% lotus leaf powder.