• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.299-302
• /
• 2005

Semisolid A356 slurries were prepared by electromagnetic stirring casting and by inoculation of Al-5Ti-B master alloy. As stirring time and addition of Al-5Ti-B are different, the grain size of the primary phase is different. Through the experiment of rheocast in a Buhler horizontal die casting machine, it was found that the finer the equiaxed primary dendrites, the smoother the die filling and better cast quality. Small equiaxed primary dendrite also results in less liquid segregation on the surface.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.16-27
• /
• 2006

The purpose of this study was to examine the effects of chemical finishes on performance characteristics of microfiber blend fabrics. A 60% polyester microfiber /40% cotton blend woven fabric was finished by ten chemicals: three silicone softeners, one fluorochemical, and their mixtures. Performance characteristics examined were fabric hand attributes. Fabric hand was evaluated by instrumental measures using Kawabata KES-F system instruments. Silicone-only finishes did not change the bending properties significantly from those of the control fabric. The fluorochemical-only finish made the fabric stiffer and crisper. When the two chemicals were mixed they tended to offset this adversary effect. Most of the chemical finishes made the surface finer and smoother. Fluorochemical-only finish improved fabric strength. Likewise, dimethylpolysiloxane silicone improved fabric strength. Amino-functional hydrophilic and diamino-functional silicone softeners, on the other hand, reduced fabric strength. However, when mixed with the fluorochemical, the adversary effect was diminished.

• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.30-36
• /
• 2007

Cypermethrin-containing polyurea microcapsules were prepared by interfacial polymerization using aromatic 2,4-toluene diisocyanate(TDI) and Ethylene diamine(EDA) as wall forming materials. The effects of the protective colloids of polyvinylalcohol(PVA) and gelatin were investigated through experimentation. The mean size of the polyurea microcapsules was smaller and the surface morphology of the PVA was much smoother than gelatin. In addition the release behavior was much more controlled and better sustained. As the concentration of protective colloid increased, the wall membrane of the polyurea microcapsules became more stable, the thermal stability of the wall membrane increased, the mean particle size became smaller, and the particle distribution was more uniform. The release behavior of the core material changed according to the concentration. As the gelatin concentration was increased, a more controlled and sustained release behavior was observed. However, in the case of PVA, the increase of PVA concentration lead to a more rapid release rate.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.5
• /
• pp.185-193
• /
• 2015

Anodization of die-casted AZ91D magnesium alloy was carried out using silicate based electrolyte solution instead of fluoride based solution to improve biocompatibility of oxidized layers. The anodic layer obtained from silicate based solution has smaller size of pore and smoother surface, resulting in lower corrosion rate in simulate body solution (SBF). Effect of enhanced structural and chemical properties in oxidized layer on biocompatibility was carefully considered.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.249-249
• /
• 2017

본 연구에서는 낙동강 본류의 진동과 적포교, 남강의 거룡강, 대산, 정암 수위표의 관측된 2015년부터 2016년 2년간 수위자료를 이용하여, Self-Organizing Maps(SOM)과 LOcally WEighted Scatter plot Smoother(Lowess) 기법으로 패턴과 추세를 분석하였다. SOM 분석 결과, 낙동강 본 류의 진동과 적포교, 남강의 거룡강, 대산은 동일한 패턴과 추세를 나타냈다. 수위의 범위도, SOM 분석에서 진동 최소 EL. 4.41m, 최대 EL. 5.01m 범위, 적포교 최소 EL. 4.56m, 최대 EL. 5.38m 범위, 거룡강 최소 EL. 4.53m, 최대 EL. 5.18m 범위, 대산 최소 EL. 4.57m, 최대 EL. 5.35m 범위로 큰 차이가 발생하지 않았다. 거룡강과 대산 수위 관측지점은 낙동강 본류의 배수위 영향을 받는 것을 알 수 있었으며, 두 지점의 수위 관측 목적에 따라 상류로 지점 변경이 필요 할 수도 있을 것으로 판단된다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.235-241
• /
• 1989

Static according tests were carried out on a series of amorphous TbFe thin films of various composition under a constant laser irradiation condition. Examination of recorded domain configurations by using polarizing microscope led to the categorization of domain characteristics into 3 distinctly different types; i.c., type A: circular domains with smooth boundaries, the size not sensitive to variation of bias field, type B: domains of irregular shape at low bias, the size increasing and the boundaries getting smoother and more circular with increasing bias field and type C: not recordable. Critical factor which distinguishes among each types was fond to be the relative magnitude of H and H of the film near T, regardless of constituent atomic species. Micromagnetical process of thermomagnetic recording cycle was analyzed scheniatically for each type.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.455-460
• /
• 2018

Chromium plating is a common surface treatment technique extensively applied in industry due its excellent properties which include substantial hardness, abrasion resistance, corrosion resistance, surface color, and luster. In this study, the effect of PTFE on corrosion behavior of Cr-P plating, low carbon steel substrates are electroplated in Cr(III) baths without and with PTFE. Trivalent chromium carbon plating was electroplated from trivalent chromium sulfate-based baths with different PTFE dispersion contents. The study focused on the microstructure, PTFE content, roughness, and corrosion resistance of the Cr-P-PTFE composite plating. Scanning electron microscopy and atomic force microscopy images showed a smoother plating and a decrease in the surface roughness of the electrodeposited. The results demonstrate that PTFE eliminates the cracks within plating by reducing internal stress. Therefore, the corrosion resistance of Cr-P-PTFE composite platings were better than that of Cr-P alloy platings.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.399-409
• /
• 2019

Three-dimensional (3D) human pose reconstruction from single-view image is a difficult and challenging topic. Existing approaches mostly process frame-by-frame independently while inter-frames are highly correlated in a sequence. In contrast, we introduce a novel spatial-temporal 3D human pose reconstruction framework that leverages both intra and inter-frame relationships in consecutive 2D pose sequences. Orthogonal matching pursuit (OMP) algorithm, pre-trained pose-angle limits and temporal models have been implemented. Several quantitative comparisons between our proposed framework and recent works have been studied on CMU motion capture dataset and Vietnamese traditional dance sequences. Our framework outperforms others by 10% lower of Euclidean reconstruction error and more robust against Gaussian noise. Additionally, it is also important to mention that our reconstructed 3D pose sequences are more natural and smoother than others.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.137-140
• /
• 2021

High dynamic range (HDR) technology has been drawing attention in the field of imaging and consumer entertainment. As tools for capturing and creating HDR contents, encoding, and transmission evolve to support HDR formats, various display capabilities are being developed and increased. Hence, there is need for remapping native HDR imagery for display on lower quality legacy standard dynamic range (SDR) displays. This operation is referred to as tone mapping. In this paper, we present a sectional tone mapping method by Lenzen, and expand upon a tone mapping approach to improve temporal stability while maintaining picture quality. Compared to the existing block-based sectional tone mapping, our method uses the edge awareness-based tone mapping. We estimate the performance of the objective metric on temporal flickering. The experimental result shows that the algorithm maintains a smoother relationship between the output luminance values, and this reveals success in reducing halos and improving temporal stability with adopted edge aware filtering.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1560-1566
• /
• 2021

Cyber Sickness, which occurs when using Virtual Reality contents, is the most serious problem in immersive Virtual Reality contents. The purpose of this study is to identify the effects and causes of graphic environmental factors on Cyber Sickness in Virtual Reality contents. To this end, cyber sickness experiments were conducted according to the light source and material settings, which are most commonly used in graphical environmental elements. Cyber Sickness measurements were based on the Simulator Sickness Question(SSQ) tool to derive an index that causes Cyber Sickness As a result of the analysis, the smaller the surface roughness, the higher the degree of Cyber Sickness, and the smaller the surface roughness, the smoother the surface of the 3D object, and many specular reflections from the light source occurred, which was confirmed to be the cause of great Cyber Sickness.