• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.361-366
• /
• 2018

Ice crushing occurs in many situations that involve a sliding frictional component such as sports involving ice-contact, ice interaction with ship hulls, and ice-on-ice sliding/crushing within glaciers and between interacting sea ice floes. Ice crushing-friction tests were conducted in the lab at $-10^{\circ}C$ using a set of acrylic ice-crushing platens that included a flat smooth surface and a variety of high-roughness surfaces with regular arrays of small prominences. The experiments were part of Phase II tests of the Blade Runners technology for reducing ice-induced vibration. Ice was crushed against the platens where the ice movement had both a vertical and a horizontal component. High-speed imaging through the platens was used to observe the ice contact zone as it evolved during the tests. Vertical crushing rates were in the range 10-30 mm/s and the horizontal sliding rates were in the range 4.14-30 mm/s. Three types of freshwater ice were used. Friction coefficients were extraordinarily low and were proportional to the ratio of the tangential sliding rate and the normal crushing rate. For the rough surfaces all of the friction coefficient variation was determined by the fluid dynamics of a slurry that flowed through channels that developed between leeward-facing facets of the prominences and the moving ice. The slurry originated from a highly-lubricating self-generating squeeze film of ice particles and melt located between the encroaching intact ice and the surfaces.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.13-25
• /
• 2014

In the current study, a drug-eluting stent coated with biodegradable polymers and sirolimus was developed by using an ultrasonic nanocoater and characterized in aspects of surface smoothness and coating thickness. In addition, in vitro release profiles of sirolimus by changing top coating layer with different biodegradable polymers were investigated. Smooth surfaces with variable thickness could be fabricated by optimizing polymer concentration, flow rate, nozzle-tip distance, gas pressure, various solvents and ultrasonic power. Smooth surface could be generated by using volatile solvents (acetone, chloroform, and methylene chloride) or post-treating with solvent vapor. Coating thickness could be controlled by varying injection volume or polymer concentration, and higher concentration could reduce the coating time while obtaining the same thickness. The thickness measurement was the most effectively performed by a conventional cutting method among three different methods that were investigated in this study. Release profiles of sirolimus were effectively controlled by changing polymers for top layer. PLGA made the release rate 3 times faster than PDLLA and PLLA and all top layers prevented burst release at the initial phase of profiles. Our results will provide useful and informative knowledge for developing drug-eluting stents, especially coated with biodegradable polymers.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.412-417
• /
• 2015

Kinect sensor has two output data which are produced from red green blue (RGB) sensor and depth sensor, it is called color image and depth map, respectively. Although this device's prices are cheapest than the other devices for three-dimensional (3D) reconstruction, we need extra work for reconstruct a smooth 3D data and also have semantic meaning. It happened because the depth map, which has been produced from depth sensor usually have a coarse and empty value. Consequently, it can be make artifact and holes on the surface, when we reconstruct it to 3D directly. In this paper, we present a method for solving this problem by using implicit surface representation. The key idea for represent implicit surface is by using radial basis function (RBF) and to avoid the trivial solution that the implicit function is zero everywhere, we need to defined on-surface point and off-surface point. Based on our simulation results using captured face as an input, we can produce smooth 3D face and fill the holes on the 3D face surface, since RBF is good for interpolation and holes filling. Modified anisotropic diffusion is used to produced smoothed surface.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.854-861
• /
• 2015

This study evaluates the objective and subjective hand as well as the preference for hand and outdoor jackets on laminated waterproof breathable fabrics with different constituent characteristics to identify those best suited for consumer needs. Mechanical properties and objective hands were measured by the KES-FB system. The subjective hand and the preference of laminated waterproof breathable fabric for outdoor jackets were rated by the 20's and 30's women experts with tactile and visual senses that utilized a questionnaire with a seven-point semantic differential scale; subsequently, the flexibility and compressive elasticity of laminated waterproof breathable fabrics were low. However, light and thin waterproof breathable fabrics with a smooth surface had high scores in smoothness, fullness & softness and total hand value. In addition, laminated waterproof breathable fabrics were classified into three hand factors: flexibility, density, and surface properties. There were significant differences on flexibility and surface property perceptions, hand and out-door jackets preferences according to the characteristics of waterproof breathable fabrics. The hand preference of the laminated waterproof breathable fabric improved with decreasing 2HB and increasing EM. However, EM showed positive effect for outdoor jacket preferences. Those that were flexible and smooth were preferred for outdoor jackets.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.1-111.1
• /
• 2015

As an alternative way to get sophisticated nanostructures, atomic force microscopy (AFM) has been used to directly manipulate building primitives. In particular, assembly of metallic nanoparticles(NPs) can provide various structures for making various metamolecules. As far, conventionally made polygonal shaped metallic NPs showed non-uniform distribution in size and shape which limit its study of fundamental properties and practical applications. In here, we optimized conditions for deterministic manipulation of ultra-smooth and super-spherical gold nanoparticles (AuNPs) by AFM. [1] Lowered adhesion force by using platinum-iridium coated AFM tips enabled us to push super-spherical AuNPs in linear motion to pre-programmed position. As a result, uniform and reliable electric/magnetic behaviors of assembled metamolecules were achieved which showed a good agreement with simulation data. Furthermore, visualization of near field for super-spherical AuNPs was also addressed using photosensitive azo-dye polymers. Since the photosensitive azo-dye polymers can directly record the intensity of electric field, optical near field can be mapped without complicated instrumental setup. [2] By controlling embedding depth of AuNPs, we studied electric field of AuNPs in different configuration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.918-928
• /
• 1995

This paper deals with the various mechanical properties and fatigue strength in the FRW1 (friction welded interface) of high speed steel (HSS-Co) to SM55C through the tensile test, hardness test and fatigue test. The data of FRW specimens are also compared with those of the base materials (HSS-Co and SM55C steel). Three kinds of specimens used in this study are the friction welded joints, HSS-Co and SM55C carbon steel with circumferential notch, saw notch and smooth, respectively. It is confirmed that the applied welding conditions are optimum methods in order to minimize the heat affected zone (HAZ) and hardness distribution at the HAZ. The fatigue strengths at N = 10$^{6}$ cycles of smooth, circumferential notch and saw notch specimens in the FRW joints are about 299.2 MPa, 123.8 MPa and 247.5 MPA, respectively. The fatigue strength of the friction welded joints is almost equal to that of the SM55C carbon steel in the optimum welding conditions. The fatigue cracks initiated at the welded zone are propagated along the side of SM55C steel.

• Applied Microscopy
• /
• v.18 no.2
• /
• pp.21-33
• /
• 1988

The purpose of this study was to investigate the effect of chlorambucil on the mouse Leydig cell by electron microscopy. Chlorambucil suspended in the 0.5N sodium bicarbonate(pH 8.0) was injected I.P.(intraperitoneal) at a dosage of level 20mg/kg for 1 weeks, 3 weeks and 5 weeks, respectively. The results obtained from this experiment are as follows: 1. One week after the administration of chlorambucil, there was an increase in heterochromatin, swelling and cristae disruption in some mitochondria, mild vacuolation between cells and the occurrence of membrane bound inclusions in some nuclei. 2. After 3 weeks, smooth endoplasmic reticulum dilations, cytoplasmic vacuolation, mitochondrial swelling, inner mitochondrial cristae disruption, membranous whorls, and intranuclear inclusions were observed in the treated cells. 3. After 5 weeks of treatment, most mitochondria were swollen and their membranes were severely disrupted. Further, smooth endoplasmic reticulum dilations and vacuolation of the cytoplasm were apparent in the treated Leydig cells. In addition numerous membranous whorls and intranuclear inclusion bodies were present. The nuclei displayed invaginatons of the nuclear membrane and large clumps of heterochromatin. From these results it is concluded the longer the duration of chlorambucil administration, the greater the degeneration of the nucleus and cytoplasmic organelles.

• Journal of Welding and Joining
• /
• v.5 no.2
• /
• pp.44-52
• /
• 1987

The fracture toughness, $J_{IC}$ of high frequency electric resistance welded steel pipe for smooth and side-grooved CT specimen was evaluated by unloading compliance method. The crack growth, .${\delta}a$ was obtained from the equation of Donald and Saxena & Hudak, and $J_{IC}$ was determined from the curve of J-${\delta}a$ relations. The crack growth on the experiment using unloading compliance method is underestimated as compared with ${\delta}a$ measured directly by the SEM, so the reliability of $J_{IC}$ from saxena & Hudak equation is large than that from Donald. The $J_{IC}$ value of side-grooved CT Specimen is estimated less than that of smooth, and this is the effect of the side-groove, the shear-lip of crack tip and the reduction of crack tunnelling phenomena.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.2
• /
• pp.217-223
• /
• 1998

Oxygen-derived free radicals have been implicated in many important functions in the biological system. Electrical field stimulation (EFS) causes arterial relaxation in animal models. We found that EFS applied to neither muscle nor nerve but to Krebs solution caused a relaxation of rat aorta that had been contracted with phenylephrine. In the present study, therefore, we investigated the characteristics of this EIRF (electrolysis-induced relaxing factor) using rat isolated aorta. Results indicated that EIRF acts irrespective of the presence of endothelium. EIRF shows positive Griess reaction and is diffusible and quite stable. EIRF-induced relaxation was stronger on PE-contracted aorta than on KCl-contracted one, and inhibited by the pretreatment with methylene blue. Zaprinast, a cGMP-specific phosphodiesterase inhibitor, potentiated the EIRF-induced relaxation. $N^G-nitro-L-arginine$, NO synthase inhibitor, did not inhibit the EIRF-induced relaxation. Deferroxamine, but not ascorbic acid, DMSO potentiated the EIRF-induced relaxation. These results indicate that electrolysis of Krebs solution produces a factor that relaxes vascular smooth muscle via cGMP-mediated mechanism.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.439-453
• /
• 2002

Researches using DEM are actively progressed in field of water resource, and especially the extraction of watershed and stream based on topographic and hydrologic analysis, is widely used in GIS analysis recently. However, because it is extracted that watershed which is type of sliver polygon and stream which is type of straight line in low topographic region, they're not efficient for application. This study determined buffer zone from stream and tried smooth elevation change to buffer zone in order to efficiently extract abnormal watershed and stream being occurred in low topographic region. Especially, we applied equal-distance assignment model using Voronoi Diagram to determine smooth elevation change. Also, we extracted watershed and stream using stream recognition DEM and origional DEM, and evaluated the efficiency of research through comparing the shape of watershed and stream in low topographic region.