• Animal cells and systems
• /
• v.10 no.4
• /
• pp.175-182
• /
• 2006

A new halacarid species, Agaue laeviunguis n. sp. from Youngil Bay, Pohang City, South Korea is described. In sharing the character combination of three dorsal setae on PE, lacking dorsal seta anterior to insertion of leg IV, three ventral setae on PE, female PGS adjacent to GF, telofemora devoid of fovea, well developed smooth cerotegumental lamella on all telofemora, presence of accessory process on all lateral claws, long gnathosoma, and a smooth seta on P2 in both sexes, this species resembles A. subglabra Bartsch from Australia. The species, however, is clearly distinguished from A. subglabra by its larger body, claws of tarsi II-IV without ventral pecten, and much more PGS in female. Description of proto- and deutonymphs are also provided.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.603-609
• /
• 1990

Detection and non-propagating cracks of small fatigue crack for smooth and pre-cracked specimens were examined in a carbon steel. The fretting oxide induced crack closure triggered by the roughness induced crack closure has an important role in determing the length. The fatigue limit for the with no cracks or with a short pre-crack is lower at R=-1 than that at R=0. A non-propagating crack are quite different between points near the specimen's surface and those of deepest penetration.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.251-256
• /
• 2011

Virtual colonoscopy is favored over conventional colonoscopy because its non-invasive procedure can avoid complications that may happen in a conventional approach and because it can cleanse colon electronically instead of uncomfortable conventional colon cleansing. Electronic Colon Cleansing(ECC) has to deal with not only removing tagged fecal material but also recovering Partial Volume Effect(PVE) due to tagging material. This paper proposes an ECC method restoring inherent natural PVE while previous approaches focused only on reducing PVE due to tagged fecal material. The proposed method reduces PVE using 3-dimensional adaptive density correction and then replaces tagged fecal material into air. Next, it generates natural PVE for the replaced air adjacent to soft tissue and finally makes smooth transition of gray values for soft tissue adjacent to the replaced air. The proposed method applied to eleven patient data, and showed promising results.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2002.06b
• /
• pp.35-35
• /
• 2002

The large conductance $Ca^{2＋}$ -activated $K^{＋}$ channels ($BK_{Ca}$) in vascular smooth muscle have been considered to function as a negative feedback in pressure-induced vasoconstriction. In the present study, the function of cytoskeletons in the regulation of $BK_{Ca}$ and its stretch sensitivity was investigated. Using the inside-out patch clamp technique, we recorded single channel activities of $BK_{Ca}$ with 150 mM KCl in the bath solution (pCa=6.5).(omitted)itted)

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.406-412
• /
• 2003

An experimental study was carried on the characteristics of fluid flow and heat transfer in a fluidized bed shell-and-tube type heat exchanger with corrugated tubes. Seven different solid particles having same volume were circulated in the tubes. The effects of various parameters such as water flow rates, particle geometries and materials, and geometries of corrugated tubes on relative velocities and drag coefficients were investigated. The present work showed that the drag force coefficients of particles in the corrugated tubes were usually lower than those in the smooth tubes, meanwhile the relative velocities between particles and water in the corrugated tubes were little higher than those in the smooth tubes except the glass.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.454-461
• /
• 1997

Heat transfer and pressure drop for single phase flow of water in circular smooth and micro-fin tubes are measured. Copper tubes of 9.52 and 7mm outer diameter were used. The internal roughness in micro-fin tubes was formed by spiral grooves having $25^{\circ}$ helx angle, 0. 12mm fin height and 0.454mm pitch in 9.52mm tubes; $18^{\circ}$ helix angle, 0.15mm fin height and 0.322mm pitch in 7mm tubes. The measured friction factor and heat transfer coefficient are compared with relevant previous works, and the correlations for micro-fin tube are developed.

• Journal of Acupuncture Research
• /
• v.23 no.2
• /
• pp.21-31
• /
• 2006

In the present study, We have investigated the bee venom (BV) and melittin (a major component of BV)-mediated anti-proliferative effects, and defined its mechanisms of action in cultured rat aortic vascular smooth muscle cells (VSMCs). BV and melittin $(0.4{\sim}0.8\;{\mu}g/ml)$ effectively inhibited 5% FBS-induced VSMCs proliferations. The regulation of apoptosis has attracted much attention as a possible means of eliminating excessively proliferating VSMCs. In the present study, the treatment of BV and melittin strongly induced apoptosis of VSMCs. These results suggest that the anti-proliferative effects of BV and melittin in VSMCs should be related with induction of apoptosis. Further study about Influence of BV and melittin upon apoptosis mechanism is therefor thought to be necessary to confirm the above results.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.6
• /
• pp.53-62
• /
• 1994

In this paper, a fuzzy logic-based idle speed controller is designed for automotive engine with a purpose of high efficiency and low pollution. When the idle speed is low engine operation is not smooth, otherwise fuel consumption is incresed. Therefore the idle speed must be maintained as low as possible within the scope that ensures smooth operation of engine. By simulation, we show that the idle speed controller has generated a proper control signal as engine condition or enviornment varies, and also operated well for unexpected cases. Also, an engine simulator, which is used as a basic tool for controller design, is developed and utilized for reduction of development time and cost.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.4
• /
• pp.263-270
• /
• 2001

In stamping-die manufacturing, the first step is to build die patterns for lost wax casting process. A recent industry trend is to manufacture the die pattern using 3-axis NC machining. This study identifies technical considerations of the pattern machining caused by the characteristics of Styrofoam material, and proposes technical methods related to establishing a process plan and generating tool paths for optimizing the pattern machining. In this paper, the process plan includes the fellowing three items: 1) deter-mining a global machining sequence-a sequence of profile, top, bottom machining and two set-ups, 2) extracting machining features from a pattern model and merging them, and 3) determining a machining sequence of machining features. To each machining feature, this study determines the machining start point, generates the approach tool path, and proposes a tool path linking method fur reducing the distance of the cutter rapid motion. Finally, a smooth tool path generation and an automatic feedrate adjustment (AFA) method are introduced far raising the machining efficiency.

• Korean Journal of Veterinary Service
• /
• v.35 no.2
• /
• pp.153-157
• /
• 2012

A 7-year-old, castrated male dachshund dog with tumor of the spleen portion was referred to the Kangwon National University. The tumor removed surgically and tumor size was 6~7 cm. Histopathologically, this neoplasm was the presence of perivascular whorls of fusiform cells. The cells also arranged in interlacing bundles or storiform patterns. And this neoplasm consisted of spindle cells that often formed distinct whorls around a central capillary. Immunohistochemical analysis revealed multi-focally immunoreactivity for ${\alpha}$-smooth muscle actin, whereas not immunoreactive for desmin, S-100, von Willebrand factor. On the base of the histological and immunohistochemical results, this neoplasm was diagnosed as a canine hemangiopericytoma.