• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.153-167
• /
• 2018

Despite many criticisms that topographic survey data for the official land price appraising collected annually using field survey method might be inaccurate, there is only few concrete research on it. This paper investigated whether the topographic survey data collected by a local government using field survey method is consistent with the data analyzed using the digital elevation model to examine its accuracy. The accuracy analysis indicated that 324 out of 1537 lots of land have inconsistent results which means the ratio of inconsistency is 17.36%. Among 11 areas studied, five had the inconsistency ratio above 20% while the worst one had 38.71%. The inconsistency ratio is generally higher for the rough terrain with irregular slope and high altitude while it is relatively lower for the terrain with smooth landform. The analysis results imply that there are limitations in investigating the topology by field survey method. Therefore, the official land price appraising policy should set precise criterion and change over to highly accurate geographic information analysis method to effectively and accurately examine topology, given the fact that the topology of the Republic of Korea has complicated features with irregular slope and altitude.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2001

Purpose : This study was undertaken to observe the occurrence of the vessel aneurysms according to several different methods of microvascular anastomosis. Mterials & methods : Forty Sprague-Dawley rats, weighing $180{\sim}200$ grams, were used for this experiment. The rats were divided into 4 groups. Group 1 (10 rats): The adventitia was trimmed off 5mm from the cut edge each and 20 arterial anastomoses were performed using 8 to 10 interrupted 9-0 polypropylene ($Prolene^{TM}$, Ethicon, U.K.) suture. Group 2 (10 rats): The adventitia was trimmed off as in group 1. Twenty arterial anastomoses were performed using continuous 9-0 polypropylene($Prolene^{TM}$, Ethicon, U.K.) suture. Group 3 (10 rats): The adventitia was stripped only 1mm from the cut edge each but not removed,. Twenty arterial anastomoses were performed using 8 to 10 interrupted 9-0 polypropylene($Prolene^{TM}$, Ethicon, U.K.) suture. Group 4 (10 rats): The adventitia was handled as in group 3. Twenty arterial anastomoses were performed using 9-0 polypropylene($Prolene^{TM}$, Ethicon, U.K.) suture. The arteries of the animals in all groups were explored at 28th days. We examined patency, presence of an aneurysm, other vascular abnormalities and microscopically observed the aneurysms with H&E and Van-Gieson stains. Result : 1. Patency rate was 80% in group 1, 95% in group 2, 85% in group 3 and 90% in group 4, respectively. 2. Aneurysm occurred 20% in group 1, 5% in group 2, 5% in group 3 and 5% in group 4, respectively. 3. There was no other vascular abnormalities in each group. 4. Infection rate was 5% in group 1, 0% in group 2, 20% in group 3 and 15% in group 4, respectively. 5. In the histopathological findings, we observed partially necrotic changes, loss and fragmentation of outer elastic lamella of smooth muscle in media and the proliferation of hyperplastic subintima. A lot of inflammatory cells were infiltrated in hyperplastic intima. Conclusions : On the basis of these observation, we could state that there were little differences in the occurrence of aneurysms according to different anastomotic suture methods.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2013

Objective: To investigate changes in the invasive capacity of gastric cancer cells in vitro after expression inhibition of T lymphoma invasion and metastasis inducing factor 1 (Tiam 1) and underlying mechanisms. Methods: Using adhesion selection, two subpopulations with high ($M_H$) or low ($M_L$) invasive capacity were separated from the human gastric cancer cell line MKN-45 ($M_0$). Tiam 1 antisense oligodeoxynucleotide (ASODN) was transfected into $M_H$ cells with liposomes, and expression of Tiam 1 mRNA and protein was determined by RT-PCR and quantitative cellular-ELISA. Changes in the cytoskeleton, invasive capacity in vitro and expression of ras-related $C_3$ botulinum toxin substrate 1 (Rac 1), integrin ${\beta}1$ and matrix metalloproteinase 2 (MMP 2) between Tiam 1 ASODN transfected $M_H$ cells and non-transfected cells were observed by HE staining, cytoskeletal protein staining, scanning electron microscopy, Boyden chamber tests and cyto-immunohistochemistry. Results: A positive correlation existed between the expression level of Tiam l mRNA or protein and the invasion capacity of gastric cancer cells. After ASODN treatment ($0.43{\mu}M$ for 48 h), Tiam 1 mRNA transcription and protein expression in $M_H$ cells were decreased by 80% and 24% respectively (P < 0.05), compared with untreated controls, while invasive capacity in vitro was suppressed by 60% (P < 0.05). Morphologic and ultrastructural observation also showed that ASODN-treated $M_H$ cells exhibited smooth surfaces with obviously reduced filopodia and microspikes, which resembled $M_0$ and $M_L$ cells. Additionally, cytoskeletal distribution dramatically altered from disorder to regularity with reduced long filament-like structure, projections, pseudopodia on cell surface, and with decreased acitn-bodies in cytoplasm. After Tiam 1 ASODN treatment, the expression of Rac 1 and Integrin ${\beta}1$ in $M_H$ cells was not affected (P > 0.05), but that of MMP 2 in $M_H$ cells was significantly inhibited compared with untreated cells (P < 0.05). Conclusion: Over-expression of Tiam-1 contributes to the invasive phenotype of gastric cancer cells. Inhibition of Tiam 1 expression could impair the invasive capacity of gastric cancer cells through modulating reconstruction of the cytoskeleton and regulating expression of MMP 2.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.231-255
• /
• 2012

This study examined the communication and conflict between ship prganization and ship management team. Those are measured and analyzed about both groups, and then the relationships would be investigated objectively and synthetically. Especially, this relationships are enlightened by measuring the level and gap of the communication and group conflict between ship organization and ship management team. The effect of that conflict is analyzed on the organization commitment and job satisfaction of ship organizations. As a result, this study demonstrates the communications have a negative influence on group conflict with statistic significance, also the conflicts effect negatively on the organization commitment and job satisfaction. In the analysis of gaps about the communication and conflict between groups, the level of group conflict is lowest in the group whose gap of communication is small and both communications are activated, and the organization commitment and job satisfaction are highest in the group whose gap of group conflicts is small and both level of the conflicts are low. To conclude, the ship organization and ship management teams in the shipping company have to lessen their conflict each other and heighten the organization commitment and job satisfaction through their smooth communication.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.275-298
• /
• 2012

Terminal operators have provided special services such as loading, discharging, stowage of cargo to the owner, and carriers of the sea, which contribute the domestic and international logistics. For smooth flow of logistics, container terminal should reserve spaces for inbound and outbound logistics. However, if it is unable to provide the spaces, which can be caused by labour strikes or terminal lockouts and so on, national logistic system and financial management of terminal operators can be seriously affected. In order to minimize these kinds of problems, terminal operators impose high rate of charges ("overstorage charge") to the accumulated cargoes and/or containers, which are stipulated in terminal service agreement. Nevertheless, if there is no terminal service agreement with an owner of cargo and/or container, any kind of charge can cause legal problems (conflict ??) between the cargo and terminal operator. In this regard, I would like to study on the definition of overstorage charge and the legal issue of it based on the Busan district court's judgment. In particular, I will propose a special right of commercial lien and public auction for terminal operators to settle accumulated cargoes in container terminal.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.551-557
• /
• 2017

Hair beauty treatments that can express individuality have increased and diversified. However, their repetitive use has also brought about hair damage. To reduce such damage, the importance of hair treatments when receiving chemotherapy has magnified greatly. In this study, the hair (normal hair, NH) of 5 people in their 20s has been collected and observed with SEM before dyeing (NH), after dyeing (DH) and after dyed and treated (DTH) to measure the hair's morphological damage and mineral content. SEM observation results revealed that, in DTH, a cuticle-like arrangement appears almost uniformly, the hair settles, the lines are smooth, and the damage degree is low. Regarding mineral content, the concentration of minerals was generally balanced. However, in the observation of toxic minerals and minerals found in large amounts, the concentration of Ba, Na, Ca, and Mg was higher than the balance range in NH, DH, and DTH.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.39-42
• /
• 2011

The composite electroplating is accomplished by adding inert materials during the electroplating. Permalloy is the term for Ni-Fe alloy and it is used for industrial applications due to its high magnetic permeability, surface wear resistance, corrosion protection. Microhardness for microdevices is enhanced after composite coating and it increases the life cycle. However, the hydroxyl group on the silica makes their surface susceptible to moisture and it causes the silica nanoparticles to be agglomerated in the aqueous solution. The agglomeration problem causes poor dispersion which eventually interrupts uniform deposition of silica nanoparticles. In this study, the dispersion of silica nanoparticles in the permalloy electroplated layer is reported with variation of additives and current densities. The optimum current density was 20 $mA/cm^2$ and the silica content was 9 at% at $50^{\circ}C$. The amount of silica nanopowder codeposition and surface morphologies were influenced with variation of additives. In the bath, smooth surface morphology and relatively high contents of silica nanopowder codeposition were obtained with addition of sodium lauryl sulfate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.1-13
• /
• 2009

VMS(Variable Message Sign) which makes the traffic flow smooth by providing traffic information to road users in real-time has been being installed or operated on the road as part of the detailed ITS system. However, some problems were found as a result of survey on express way currently. In the part of the phase operation, the message interpretation time wasn't defined so that the phase operation was difficult. In the part of the information service, not considering characteristic of the VMS section caused the confusion to drivers. In the part of the message exposure, font, alignment, conversion and composition of the information were not consistent and use of superfluous words and inconsistent use of word having the same meaning brought about the problem on information communication This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of each individual VMS installation location. The method is as follow. the font type is the GULIM, the message conversion method is simple conversion method, the alignment method is centering alignment method and the color is defined according to each situation. In this study, the preference survey was performed to review the validity of the proposed improvement through the common driver. The results were similar with the pre-study except for the font type. This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of individual VMS installation location. For the evaluation of status and improvement, preference survey of ordinary drivers and statistics analysis was carried.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1172-1179
• /
• 2020

As a Lagrangian particle method, Moving Particle Semi-implicit (MPS) method has great capability to capture interface/surface. In recent years, the multiphase flow simulation using MPS method has become one of the important directions of its developments. In this study, some key methods for multiphase flow have been introduced. The interface tension model in multiphase flow is modified to maintain the smooth of the interface and suitable for the three-phase flow. The mass transfer at immiscible liquid interface entrained by single bubble which could occur in Molten Core-Concrete Interaction (MCCI) has been investigated using this particle method. With the increase of bubble size, the height of entrainment column also increases, but the time of film rupture is slightly different. With the increase of density ratio between the two liquids, the height of entrained column decreases significantly due to the decreasing buoyancy of the denser liquid in the lighter liquid. In addition, the larger the interface tension coefficient is, the more rapidly the entrained denser liquid falls. This study validates that the MPS method has shown great performance for multiphase flow simulation. Besides, the influence of physical parameters on the mass transfer at immiscible interface has also been investigated in this study.