• Proceedings of the KSME Conference
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2217-2221
• /
• 2007

Because of the ozone layer depletion and global warming, new alternative refrigerants are being developed. In this study, evaporation heat transfer characteristics of carbon dioxide flowing upward in a vertical tube have been investigated by experiment. Before the test section, a pre-heater is installed to adjust the inlet quality of the refrigerant to a desired value. A smooth tube with outer diameter of 5 mm and length of 1.44 m was selected as a test tube. The test was conducted at mass fluxes of 212 to 530 kg/$m^2s$, saturation temperature of -5 to 20$^{\circ}C$, and heat fluxes of 20 to 45 kW/$m^2$. As the vapor quality and mass fluxes increase, the heat transfer coefficients of carbon dioxide are decreased, and the heat transfer coefficients increase when the heat fluxes and saturation temperatures increase.

• Structural Engineering and Mechanics
• /
• 제14권4호
• /
• pp.455-472
• /
• 2002

The paper involves the study on the elastic and elasto-plastic stress wave propagation in the 1-D and 2-D solid media. The Smooth Particle Hydrodynamics equations governing the elastic and elasto-plastic large deformation dynamic response of solid structures are presented. The proposed additional stress points are introduced in the formulation to mitigate the tensile instability inherent in the SPH approach. Both incremental rate approach and leap-frog algorithm for time integration are introduced and the new solution algorithm is developed and implemented. Two examples on stress wave propagation in aluminium bar and 2-D elasto-plastic steel plate are included. Results from the proposed SPH approach are compared with available analytical values and finite element solutions. The comparison illustrates that the stress wave propagation problems can be effectively solved by the proposed SPH method. The study shows that the SPH simulation is a reliable and robust tool and can be used with confidence to treat transient dynamics such as linear and non-linear transient stress wave propagation problems.

• Smart Structures and Systems
• /
• 제18권6호
• /
• pp.1145-1167
• /
• 2016

This study presents a new method to computes analytical fragility curves of a structure subject to tsunami waves. The method uses dynamic analysis at each stage of the computation. First, the smooth particle hydrodynamics (SPH) model simulates the propagation of the tsunami waves from shallow water to their impact on the target structure. The advantage of SPH over mesh based methods is its capability to model wave surface interaction when large deformations are involved, such as the impact of water on a structure. Although SPH is computationally more expensive than mesh based method, nowadays the advent of parallel computing on general purpose graphic processing unit overcome this limitation. Then, the impact force is applied to a finite element model of the structure and its dynamic non-linear response is computed. When a data-set of tsunami waves is used analytical fragility curves can be computed. This study proves it is possible to obtain the response of a structure to a tsunami wave using state of the art dynamic models in every stage of the computation at an affordable cost.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권4호
• /
• pp.225-235
• /
• 2015

Treatments for asthma are largely pharmaceutical, with some therapies also utilising alternative breathing techniques. The objective of both medical and alternative methods is to relax contracted airway smooth muscle (ASM). In normal subjects, tidal breathing- and deep inspiration-oscillations are believed to have a bronchodilatory effect. Similarly, application of length oscillations to isolated, contracted ASM also elicits muscle relaxation. As a means of investigating more-effective alternative treatment methods for contracted airways, we analyse the combined effects of bronchodilators and length oscillations on isolated, contracted ASM. The contractile state of the muscle tissue prior to treatment is of primary interest. Thereafter, the effect of applying a combination of small superimposed length oscillations with tidal breathing-like oscillations to ASM is studied alone and in combination with a common bronchodilator, isoproterenol (ISO). This work suggests that relaxation of isolated, contracted ASM following application of combined oscillations and ISO is larger than treatments of either combined oscillations or ISO alone. Further, the observed oscillation-associated relaxation is found to be amplitude- rather than frequency-dependent. This study gives additional insight into the role of oscillations and bronchodilators on contracted airways.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제24권2호
• /
• pp.241-250
• /
• 2000

In this study, condensation heat transfer tests were conducted in flat aluminum multi-channel tubes using R-22. Two internal geometries were tested ; one with smooth inner surface and the other with micro-fins. Data are presented for the followin~ range of variables ; vapor quality($0.1{\sim}0.9$), mass flux($200{\sim}600kg/m^2s$) and heat flux($5{\sim}15kW/m^2$). The micro-fin tube showed higher heat transfer coefficients compared with those of the smooth tube. The difference increased as the vapor quality increased. Surface tension force acting on the micro-fin surface at the high vapor quality is believed to be responsible. Different from the trends of the smooth tube, where the heat transfer coefficient increased as the mass flux increased, the heat transfer coefficient of the micro-fin tube was independent of the mass flux at high vapor quality, which implies that the surface tension effect on the fin overwhelms the vapor shear effect at the high vapor quality. Present data(except those at low mass flux and high quality) were well correlated by equivalent Reynolds number, Existing correlations overpredicted the present data at high mass flux.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제19권4호
• /
• pp.929-940
• /
• 1995

The fatigue strength and fracture topography in the friction welded interface of high speed steel (HSS-Co) to SM55C carbon steel have been investigated through the fatigue test, SEM fractograph and EDS (energy dispersive spectrometer) analysis. Three kinds of specimens used in this research are the friction welded joints, HSS-Co and SM55C carbon steel with circumferential notch, saw notch and smooth, respectively. The notch sensitivity factor, .eta. of the friction welded joints is lower than that of the base materials, and that represents a superiority of the joint performance of FRW. Fracture topography of the FRW specimens with a notch showed a cleavage or brittle appearance, while that of the FRW smooth specimen appeared to be ductile. Furthermore, although fatigue crack likely initiated near the weld interface of the FRW smooth specimen, crack propagation continued into the HAZ of SM55C steel. Finally, fatigue fractures of the base materials were associated primarily with the inclusions located at the outer periphery of the specimen.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권2호
• /
• pp.201-207
• /
• 1998

To evaluate the possibility that the ginseng saponins could be developed as an anti-arteriosclerotic agent, we examined the inhibitory effects of ginseng saponins (total saponin[TS], panaxatriol[PT], panaxadiol[PD]) on the expression of c-fos mRNA and the proliferation of cultured rat aortic vascular smooth muscle cells (VSMCs) stimulated by angiotensin II (Ang II). TS and PT (1.0 mg/ml) suppressed c-fos mRNA induction in VSMCs stimulated by $10^{-5}$ M Ang II. The order of inhibitory potency was PT>TS. Ginseng saponins ($0.01{\sim}1.0$ mg/ml) inhibited the proliferation of VSMCs stimulated by Ang II in a concentration dependent manner, the inhibitory potency was TS＞PT＞PD at $0.1{\sim}1.0$ mg/ml. These results suggest that ginseng saponins may suppress Ang II-stimulated proliferation of aortic VSMCs which can be seen in atherosclerosis, hypertension and restenosis.

• Journal of Ocean Engineering and Technology
• /
• 제15권3호
• /
• pp.75-80
• /
• 2001

The elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the material tearing modulus and characterizes the crack tip field under the plane stress and strain. SG-365 steel is observed that J-R curve and Tmat value decrease as 0%, 20%, 30%, and 40%. The 40% side grooved specimen is very useful in estimation of the $J_IC$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides. it improves the accuracy of toughness values, decreases the scattering the them and tunneling and shear lip by the side groove. Applicability of tearing modulus($T_J$ proposed by paris et al as instability panameter for this material is investigated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제12권3호
• /
• pp.130-138
• /
• 2000

The friction factor equation of open channel flow is developed by using Prandtl's mixing length theory and considering the flow characteristics of smooth or rough turbulent flow. BYO model considers vertical velocity profile for the (:omputation of bottom friction of surface waves and current flow. The model computes the mean bottom friction of combined wave-current flow by the vectorial summation of wave velocity and current velocity at Bijker point. The near bottom flow is discriminated by three flow regimes; smooth, transitional and rough turbulent flow. The model, BYO, has been further refined considering the combination of smooth turbulent flow and rough turbulent flow.

• Korean Journal of Head & Neck Oncology
• /
• 제31권2호
• /
• pp.43-45
• /
• 2015

Angiomyolipoma is a benign tumor that is composed of adipose tissue, blood vessels and smooth muscle. The kidney is the most common location of this tumor. In the larynx, angiomyolipoma has been rarely reported in the literature. We describe the patient of 64-year-old male with an angiomyolipoma arising from the vallecula. The tumor had a smooth surface with numerous small vessels and showed heterogeneous contrast enhancement on CT. The tumor was not adhesive to surrounding tissue and was completely removed by laryngomicrosurgery with $CO_2$ laser. Microscopically, the tumor is composed of mature adipose tissue, tortuous thick walled blood vessels and thick bundles of smooth muscle.