• 제목/요약/키워드: smoke release

검색결과 174건 처리시간 0.032초

A STUDY ON THE FLAMMABILITY OF NON-FLAME-RETARDANT AND FLAME-RETARDANT MATERIALS BY USING CONE CALORIMETER

  • Yanai, Eiji;Suzuki, Takeshi;Yamada, Tokiyoshi
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
    • /
    • pp.85-92
    • /
    • 1997
  • Flammability of non-flame-retardant and flame-retardant materials was studied by using cone calorimeter Also, relations between the results obtained by using cone calorimeter and those obtained by the flammability test of japanese fire Service Law were examined. The results are as follows: 1) The ignition time of the molten specimens is relatively long, whereas the ignition time of the non-molten specimens is short. None of remarkable difference of the ignition time has been found between non-flame-retardant and flame-retardant materials specimens. 2) The peak heat release rates of flame-retardant materials are smaller than those of non-flame- retardant materials. 3) The carbon monoxide and smoke evolved from flame-retardant materials generate much more than those evolved from non-flame-retardant materials. 4) Even if flame-retardant materials are passed by the flammability test of Japanese Fire Service Law, they burn easily under external radiative heating condition.

  • PDF

콘칼로리미터를 이용한 자동차 내장재의 열적 특성 (Thermal Characteristics Of Car Interior Materials Using Cone Calorimeter)

  • 김영탁;김해림;박영주;이해평
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
    • /
    • pp.557-563
    • /
    • 2009
  • FMVSS 302 수평 연소 시험법을 통과한 자동차 내장재의 열적 특성을 평가하기 위해서 콘칼로미터를 이용하여 시험을 수행하였다. 화재 위험과 관련된 착화시간(time to ignition), 열방출률(heat release rate), 질량감소율(specific mass loss rate), 감쇠계수(extinction coefficient) 그리고 연기요소(smoke factor)와 같은 여러 가지 요소들을 분석하였다. 최대 열방출률값은 시험편에 따라 232${\sim}$635kW/$m^2$으로 큰 편차를 보였으며, 연기요소 또한 99${\sim}$551MW/$m^2$로 큰 편차를 보였다. 보조매트의 최대 열방출률은 다른 시험편에 비해서 상대적으로 낮은 값을 보였지만, 총연기 발생이 다른 시험편에 비해서 상당히 높았다. 따라서 최대 열방출률과 총 연기발생을 함께 고려한 연기요소값은 상대적으로 다른 시험편에 비해서 높게 나타났다.

  • PDF

일반담배(Cigarette)와 금연 보조 담배(금연초, 허브담배, 쑥 담배)의 기관지 상피세포에서 IL-6유리 효과비교 (The Comparison of the Effect of Cigarette and Stop Smoking-aiding Cigarette on Release of IL-6 from Bronchial Epithelial Cell)

  • 김명찬;정재일;정종훈;김학렬;양세훈;정은택;김휘정
    • Tuberculosis and Respiratory Diseases
    • /
    • 제59권5호
    • /
    • pp.530-535
    • /
    • 2005
  • 연구 배경 : 우리나라에서는 다른 나라에 비해 약초 등을 이용해 만든 흡연대용품으로 금연을 시도하려는 흡연자들도 많고 이에 따라 여러 가지 다양한 제품 등이 판매되고 있는데 이들의 기관지, 폐에 대한 안정성에 관한 연구는 아직 부족한 상황이다. 특히 흡연자중 일부는 이런 금연 보조제를 사용하는 과정에서 이들을 상용하게 되어 시판되는 금연 보조담배의 장기적 사용시 인체의 안정성 여부에 대한 연구는 중요하리라 사료된다. 방 법 : 일반담배 및 금연 보조담배 3종의 담배연기추출물(cigarette smoke extract, CSE)을 기관지 상피세포에 24시간 노출 후 배양액에서 IL-6를 측정하였고 일반담배 및 허브담배, 쑥담배 노출 후 세포에서 IL-6 m RNA를 측정하여 비교하였다. 항산화 효과를 가진 N-acetyl-L-cysteine(NAC)를 일반 담배 및 금연보조담배 추출물에 함께 투여해 IL-6의 증가 억제여부를 보았다. 결 과 : 대조군에 비해 일반담배 및 금연보조담배3종에서 기관지 상피세포에 노출 시에 모두 의미 있는 IL-6증가를 관찰할 수 있었고, IL-6 m RNA도 같은 경향으로 증가 하였다. NAC를 함께 투여 시 일반 담배 및 허브담배 금연초에서는 IL-6의 증가를 의미 있게 억제하였지만 쑥담배에서는 억제하지 못하였다. 결 론 : 현재 우리나라에서 시판되고 있는 금연 보조담배 3종(허브담배, 쑥담배, 금연초)은 일반담배처럼 기관지 상피세포에 염증을 유발할 수 있어 장기적 사용시 인체의 안정성 여부에 대한 연구는 중요하리라 사료된다.

복층터널내 화재특성에 대한 실험적 연구 (Experimental Study on the Fire Behavior in Double Deck Tunnel)

  • 박진욱;유용호;김휘성;박병직
    • 한국화재소방학회논문지
    • /
    • 제30권2호
    • /
    • pp.75-80
    • /
    • 2016
  • 최근 도시의 거대화 및 과밀화의 영향으로 교통정체가 심해지고, 이로 인한 경제적 손실이 막대하게 증가하고 있는 실정이다. 따라서 대도시 공간의 효율적인 활용 방안으로 현재 국내외 도심지 터널이 복층터널로 계획되고 운영되는 추세이다. 그러나 복층터널의 경우 층고의 감소로 인해 터널 내부에서의 차량 화재시 일반 도로터널에 비해 더 많은 양의 연기 및 검탱이 발생될 것으로 예측되기 때문에 기존의 일반 도로터널을 대상으로 구축된 설계화재강도나 연기발생량을 적용하여 설계하고 운영하는 것은 바람직하지 않다. 따라서 본 연구에서는 복층터널 설계시 유용한 설계화재곡선 제시를 위한 연구의 일환으로 실규모 차량화재실험을 수행하여 복층터널내 화재 특성 데이터를 획득하고 분석하였다. 실험은 승용차 1대의 화재상황과 2대의 화재상황, 두 가지 상황을 구현하여 수행하였으며, 실험 결과로부터 화재강도는 승용차 1대에서는 최대 2.4MW, 승용차 2대에서는 최대 3.5MW가 나타났다.

민감도 분석을 이용한 원전 주제어실의 케비닛 화재에 대한 거주성 평가 (Assessment of the Habitability for a Cabinet Fire in the Main Control Room of Nuclear Power Plant using Sensitivity Analysis)

  • 한호식;이재오;황철홍;김주성;이상규
    • 한국화재소방학회논문지
    • /
    • 제31권2호
    • /
    • pp.52-60
    • /
    • 2017
  • NUREG-1934에서 제시된 원자력발전소 주제어실의 케비닛 화재를 대상으로 운전원의 거주성을 평가하기 위하여 수치해석이 수행되었다. 이를 위해 본 연구에서는 대표적인 화재모델인 FDS가 사용되었다. 운전원의 거주성을 결정하는 기준으로서 복사 열유속, 상층부 온도, 연층높이 및 연기의 광학밀도뿐만 아니라, CO 등과 같은 독성물질의 농도가 포함되었다. 주요 결과로서, 화재모델의 확인 및 검증(V&V) 기반의 주요 입력인자 민감도 및 모델 불확실도 분석을 통해 다양한 화재시나리오에 대하여 거주성 기준의 초과 확률 및 거주 가능시간이 산출되었다. 최대 열방출률, CO 및 Soot yields의 민감도 분석을 통해, 거주시간 뿐만 아니라 거주성을 결정하는 한계기준의 변화가 발생됨을 확인하였다. 이러한 방법론은 불확실한 케비닛 화재정보를 이용한 주제어실의 거주성 평가의 신뢰성 강화를 위한 현실적인 대안이라 판단된다.

이소시아네이트 관능기 매개인자에 의한 화재 특성의 실험적 연구 (Experimental Study of Fire Characteristics by Isocyanate Functional Parameter)

  • 이재걸;한경호;조형원;윤도영
    • 한국가스학회지
    • /
    • 제26권3호
    • /
    • pp.27-37
    • /
    • 2022
  • 최근 ESS(전기저장장치)의 보급이 늘어나면서 ESS에 의한 지속적인 화재발생으로 인명 및 재산의 피해 또한 급증하고 있다. ESS에 활용되는 우레탄 샌드위치 패널에 제조에 있어 난연 성능의 향상이 필요한 실정이다. 본 연구에서는 연질 폴리우레탄 폼의 난연 특성을 구현하고자 제품의 물성을 변화시키는 이소시아네이트 관능기 파라미터의 변화로 인한 제품의 조직 치밀도가 화재성능에 미치는 영향을 연구하였다. 우레탄 조직의 치밀도를 변화시켜가며 제품을 제작하여 연소성능 시험, 가스유해성 시험, 연기밀도 시험을 진행하였다. 그 결과 총 방출열량은 이소시아네이트 관능기 그룹이 높은 경우 성능이 우수하고, 최대 열 방출율과는 상관이 없는 것을 확인하였다. 이소시아네이트 관능기 그룹의 값이 2.7이상에서 형상의 붕괴를 방지할 수 있었다. 가스유해성 시험에서는 이소시아네이트 관능기 그룹이 상대적으로 높아 조직이 치밀하면서 탄화 막 형성이 용이한 Char시스템용 난연제가 추가적으로 투입되어야 성능이 상승하였고, 연기밀도 시험에서는 이소시아네이트 관능기 그룹의 값이 2.75이상에서 성능이 증가되는 것을 확인하였다. 따라서 본 연구의 결과로 기존에 사용되던 저렴한 우레탄 샌드위치 패널을 대체할 난연제 개발에 기반을 마련할 수 있을 것으로 생각된다.

Optimal flammability and thermal buckling resistance of eco-friendly abaca fiber/ polypropylene/egg shell powder/halloysite nanotubes composites

  • Saeed Kamarian;Reza Barbaz-Isfahani;Thanh Mai Nguyen Tran;Jung-Il Song
    • Advances in nano research
    • /
    • 제16권2호
    • /
    • pp.127-140
    • /
    • 2024
  • Upon direct/indirect exposure to flame or heat, composite structures may burn or thermally buckle. This issue becomes more important in the natural fiber-based composite structures with higher flammability and lower mechanical properties. The main goal of the present study was to obtain an optimal eco-friendly composite system with low flammability and high thermal buckling resistance. The studied composite consisted of polypropylene (PP) and short abaca fiber (AF) with eggshell powder (ESP) and halloysite clay nanotubes (HNTs) additives. An optimal base composite, consisting of 30 wt.% AF and 70 wt.% PP, abbreviated as OAP, was initially introduced based on burning rate (BR) and the Young's modulus determined by horizontal burning test (HBT) and tensile test, respectively. The effects of adding ESP to the base composite were then investigated with the same experimental tests. The results indicated that though the BR significantly decreased with the increase of ESP content up to 6 wt.%, it had a very destructive influence on the stiffness of the composite. To compensate for the damaging effect of ESP, small amount of HNT was used. The performance of OAP composite with 6 wt.% ESP and 3 wt.% HNT (OAPEH) was explored by conducting HBT, cone calorimeter test (CCT) and tensile test. The experimental results indicated a 9~23 % reduction in almost all flammability parameters such as heat release rate (HRR), total heat released (THR), maximum average rate of heat emission (MARHE), total smoke released (TSR), total smoke production (TSP), and mass loss (ML) during combustion. Furthermore, the combination of 6 wt.% ESP and 3 wt.% HNT reduced the stiffness of OAP to an insignificant amount by maximum 3%. Moreover, the char residue analysis revealed the distinct differences in the formation of char between AF/PP and AF/PP/ESP/HNT composites. Afterward, dilatometry test was carried out to examine the coefficient of thermal expansion (CTE) of OAP and OAPEH samples. The obtained results showed that the CTE of OAPEH composite was about 18% less than that of OAP. Finally, a theoretical model was used based on first-order shear deformation theory (FSDT) to predict the critical bucking temperatures of the OAP and OAPEH composite plates. It was shown that in the absence of mechanical load, the critical buckling temperatures of OAPEH composite plates were higher than those of OAP composites, such that the difference between the buckling temperatures increased with the increase of thickness. On the contrary, the positive effect of CTE reduction on the buckling temperature decreased by raising the axial compressive mechanical load on the composite plates which can be assigned to the reduction of stiffness after the incorporation of ESP. The results of present study generally stated that a suitable combination of AF, PP, ESP, and HNT can result in a relatively optimal and environmentally friendly composite with proper flame and thermal buckling resistance with no significant decline in the stiffness.

Oxidative Stress, Chromatin Remodeling and Gene Transcription in Inflammation and Chronic Lung Diseases

  • Rahman, Irfan
    • BMB Reports
    • /
    • 제36권1호
    • /
    • pp.95-109
    • /
    • 2003
  • Inflammatory lung diseases are characterized by chronic inflammation and oxidant/antioxidant imbalance. The sources of the increased oxidative stress in patients with chronic inflammatory lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) derive from the increased burden of inhaled oxidants, and from the increased amounts of reactive oxygen species (ROS) generated by several inflammatory, immune and various structural cells of the airways. Increased levels of ROS produced in the airways is reflected by increased markers of oxidative stress in the airspaces, sputum, breath, lungs and blood in patients with lung diseases. ROS, either directly or via the formation of lipid peroxidation products such as 4-hydroxy-2-nonenal may play a role in enhancing the inflammation through the activation of stress kinases (JNK, MAPK, p38) and redox sensitive transcription factors such as NF-${\kappa}B$ and AP-1. Recent evidences have indicated that oxidative stress and pro-inflammatory mediators can alter nuclear histone acetylation/deacetylation allowing access for transcription factor DNA binding leading to enhanced pro-inflammatory gene expression in various lung cells. Understanding of the mechanisms of redox signaling, NF-${\kappa}B$/AP-1 regulation, the balance between histone acetylation and deacetylation and the release and expression of pro- and anti-inflammatory mediators may lead to the development of novel therapies based on the pharmacological manipulation of antioxidants in lung inflammation and injury. Antioxidants that have effective wide spectrum activity and good bioavailability, thiols or molecules which have dual antioxidant and anti-inflammatory activity, may be potential therapeutic agents which not only protect against the direct injurious effects of oxidants, but may fundamentally alter the underlying inflammatory processes which play an important role in the pathogenesis of chronic inflammatory lung diseases.

터널 화재시 종류식 환기가 연소율 변화에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Effect of Longitudinal Ventilation on the Variation of Burning Rate in Tunnel Fires)

  • 양승신;김성찬;유홍선
    • 터널과지하공간
    • /
    • 제15권1호
    • /
    • pp.55-60
    • /
    • 2005
  • 본 연구는 터널내 화재 발생시 종류식 환기가 연소율 변화에 미치는 영향을 파악하기 위하여 Froude scaling에 의해 1/20크기로 축소한 모형화재 실험을 수행하였다. 화원으로는 $8.5cm{\sim}14.5cm$의 메탄올을 사용하였으며 발열량은 $3.57{\sim}10.95kW$이다. 연소율은 로드셀을 이용하여 산출하였고, 연기거동을 파악하기 위하여 K형 열전대를 이용하여 온도분포를 측정하였다. 풍동은 터널의 한쪽부분과 연결하였고, 터널 공간의 배연속도를 제어하기 위하여 풍동의 전압을 조절하였다. 메탄올 화재인 경우 배연속도가 증가할수록 냉각효과로 인하여 연소율은 감소하였으며, 또한 같은 무차원속도(V)일때 화원 크기가 커짐에 따라 연소율은 감소하였다.

터널 화재시 배연속도가 연소율변화에 미치는 실험적 연구 - Heptane 풀화재 경우 (An Experimental Study on the Ventilation velocity of the Variation of Burning rate in Tunnel Fires - Heptane pool fire case)

  • 유홍선;양승신
    • 한국터널지하공간학회 논문집
    • /
    • 제7권2호
    • /
    • pp.109-117
    • /
    • 2005
  • 본 연구는 터널내 화재시 배연속도가 연소율 변화에 미치는 영향을 파악하기 위하여 Froude scaling에 의해 1/20 크기로 축소한 모형화재 실험을 수행하였다. 화원으로는 4.5cm~8.5cm의 헵탄을 사용하였으며 발열량은 3.71~15.6 kW이다. 연소율은 로드셀을 이용하여 산출하였고, 연기거동을 파악하기 위하여 K형 열전대를 이용하여 온도분포를 측정하였다. 풍동은 터널 상류 한쪽부분과 연결하였고, 터널 공간의 배연속도를 제어하기 위하여 풍동의 인버터를 조정하였다. 헵탄 풀화재인 경우 배연속도가 증가할수록 충분한 산소의 공급으로 연소율은 증가하였으며, 같은 무차원 속도($\bar{V}$) 일때 화원 크기가 작아짐에 따라 연소율은 증가하였다.

  • PDF