• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.63-69
• /
• 2020

The rapid development in modern industrialization pollutant the water and atmospheric air across the globe that have a major impact on the human and livings health. In worldwide, every country government increasing the importance to improve the outdoor air pollution monitoring and control to provide quality of life and prevent the citizens and livings life from hazard disease. We proposed the environmental dust level detection method for outdoor facilities using sensor fusion technology to measure precise micro-dust level and monitor in realtime. In this proposed approach use the camera sensor and commercial dust level sensor data to predict the micro-dust level with data fusion method. The camera sensor based dust level detection uses the optical flow based machine learning method to detect the dust level and then fused with commercial dust level sensor data to predict the precise micro-dust level of the outdoor facilities and send the dust level informations to the outdoor air pollution monitoring system. The proposed method implemented on raspberry pi based open-source hardware with Internet-of-Things (IoT) framework and evaluated the performance of the system in realtime. The experimental results confirm that the proposed micro-dust level detection is precise and reliable in sensing the air dust and pollution, which helps to indicate the change in the air pollution more precisely than the commercial sensor based method in some extent.

• 센서학회지
• /
• 제23권1호
• /
• pp.15-18
• /
• 2014

We present gas sensing performance based on $2{\times}2$ sensor array with four different elements ($TiO_2$, $SnO_2$, $WO_3$ and $In_2O_3$ thin films) fabricated by rf sputter. Each thin film was deposited onto the selected $SiO_2$/Si substrate with Pt interdigitated electrodes (IDEs) of $5{\mu}m$ spacing which were fabricated on a $SiO_2$/Si substrate using photolithography and dry etching. For 5 ppm $NO_2$ and 50 ppm CO, each thin film sensor has a different response to offers the distinguishable response pattern for different gas molecules. Compared with the conventional micro-fabrication technology, $2{\times}2$ sensor array with such remarkable response pattern will be open a new foundation for monolithic integration of high-performance chemoresistive sensors with simplicity in fabrication, low cost, high reliablity, and multifunctional smart sensors for environmental monitoring.

• 대한임베디드공학회논문지
• /
• 제11권2호
• /
• pp.97-105
• /
• 2016

Microcontrollers (MCUs) for endpoint smart sensor devices of internet-of-thing (IoT) are being implemented as system-on-chip (SoC) with on-chip instruction flash memory, in which user firmware is embedded. MCUs directly fetch binary code-based instructions through bit-line sense amplifier (S/A) integrated with on-chip flash memory. The S/A compares bit cell current with reference current to identify which data are programmed. The S/A in reading '0' (erased) cell data consumes a large sink current, which is greater than off-current for '1' (programmed) cell data. The main motivation of our approach is to reduce the number of accesses of erased cells by binary code level transformation. This paper proposes a built-in write/read path architecture using binary code inversion method based on hot-spot region detection of instruction code access to reduce sensing current in S/A. From the profiling result of instruction access patterns, hot-spot region of an original compiled binary code is conditionally inverted with the proposed bit-inversion techniques. The de-inversion hardware only consumes small logic current instead of analog sink current in S/A and it is integrated with the conventional S/A to restore original binary instructions. The proposed techniques are applied to the fully-custom designed MCU with ARM Cortex-M0$^{TM}$ using 0.18um Magnachip Flash-embedded CMOS process and the benefits in terms of power consumption reduction are evaluated for Dhrystone$^{TM}$ benchmark. The profiling environment of instruction code executions is implemented by extending commercial ARM KEIL$^{TM}$ MDK (MCU Development Kit) with our custom-designed access analyzer.

• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.507-520
• /
• 2020

In order to achieve effective corrosion monitoring of buried metal pipelines, a Novel nondestructive Testing (NDT) methodology using ultra-long (250 mm) Polymer Optical Fiber (POF) sensors coated with the Fe-C alloy film is proposed in this study. The theoretical principle is investigated to clarify the monitoring mechanism of this method, and the detailed fabrication process of this novel POF sensor is presented. To validate the feasibility of this novel POF sensor, exploratory research of the proposed method was performed using simulated corrosion tests. For simplicity, the geometric shape of the buried pipeline was simulated as a round hot-rolled plain steel bar. A thin nickel layer was applied as the inner plated layer, and the Fe-C alloy film was coated using an electroless plating technique to precisely control the thickness of the alloy film. In the end, systematic sensitivity analysis on corrosion severity was further performed with experimental studies on three sensors fabricated with different metal layer thicknesses of 25 ㎛, 30 ㎛ and 35 ㎛. The experimental observation demonstrated that the sensor coated with 25 ㎛ Fe-C alloy film presented the highest effectiveness with the corrosion sensitivity of 0.3364 mV/g at Δm = 9.32 × 10^-4 g in Stage I and 0.0121 mV/g in Stage III. The research findings indicate that the detection accuracy of the novel POF sensor proposed in this study is satisfying. Moreover, the simple fabrication of the high-sensitivity sensor makes it cost-effective and suitable for the on-site corrosion monitoring of buried metal pipelines.

• Smart Structures and Systems
• /
• 제6권3호
• /
• pp.197-209
• /
• 2010

The structural state of a bridge is currently examined by visual inspection or by wired sensor techniques, which are relatively expensive, vulnerable to inclement conditions, and time consuming to undertake. In contrast, wireless sensor networks are easy to deploy and flexible in application so that the network can adjust to the individual structure. Different sensing techniques have been used with such networks, but the acoustic emission technique has rarely been utilized. With the use of acoustic emission (AE) techniques it is possible to detect internal structural damage, from cracks propagating during the routine use of a structure, e.g. breakage of prestressing wires. To date, AE data analysis techniques are not appropriate for the requirements of a wireless network due to the very exact time synchronization needed between multiple sensors, and power consumption issues. To unleash the power of the acoustic emission technique on large, extended structures, recording and local analysis techniques need better algorithms to handle and reduce the immense amount of data generated. Preliminary results from utilizing a new concept called Acoustic Emission Array Processing to locally reduce data to information are presented. Results show that the azimuthal location of a seismic source can be successfully identified, using an array of six to eight poor-quality AE sensors arranged in a circular array approximately 200 mm in diameter. AE beamforming only requires very fine time synchronization of the sensors within a single array, relative timing between sensors of $1{\mu}s$ can easily be performed by a single Mote servicing the array. The method concentrates the essence of six to eight extended waveforms into a single value to be sent through the wireless network, resulting in power savings by avoiding extended radio transmission.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권4호
• /
• pp.268-275
• /
• 2014

In future, hospitals are expected to automatically issue remote transcriptions. Many general hospitals are planning to encrypt their medical database to secure personal information as mandated by law. The electronic medical record system, picture archiving communication system, and the clinical data warehouse, amongst others, are the preferred targets for which stronger security is planned. In the near future, medical systems can be assumed to be automated and connected to remote locations, such as rural areas, and islands. Connecting patients who are in remote locations to medical complexes that are usually based in larger cities requires not only automatic processing, but also a certain amount of security in terms of medical data that is of a sensitive and critical nature. Unauthorized access to patients' transcription data could result in the data being modified, with possible lethal results. Hence, personal and sensitive data on telemedicine and medical information systems should be encrypted to protect patients from these risks. Login passwords, personal identification information, and biological information should similarly be protected in a systematic way. This paper proposes the use of electronic acupuncture with a built-in multi-pad, which has the advantage of being able to establish a patient's physical condition, while simultaneously treating the patient with acupuncture. This system implements a sensing pad, amplifier, a small signal drive circuit, and a digital signal processing system, while the use of a built-in fuzzy technique and a control algorithm have been proposed for performing analyses.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1994-2000
• /
• 2016

개인의 위치를 확인할 수 있는 기술은 위치기반제어, 개인화된 광고 등 다양한 응용분야에서 요구된다. 미아발생 방지나 현장 학습을 위한 지원, 사용자의 위치에 따른 적절한 Push 이벤트 등 그 응용분야는 무궁무진하다. 기존의 많은 연구들이 위치 확인의 정확도에 비중을 두고 연구되어, 별도의 장비를 장착하거나 시설물에 특정 장치를 해야 하는 등의 제약 조건이 있었던 것과 달리 본 논문에서 제안한 알고리즘은 대부분의 사용자가 갖고 있는 스마트폰의 기본 사양만으로 위치 추적을 수행하는 것을 목적으로 하였다. 스마트 폰에 의해 수집 가능한 GPS와 WiFi RSS, 가속도계 센서 데이터를 파티클 필터를 적용하여 센서 융합을 실행하여 위치를 확인하는 알고리즘을 설계 구현하였고, 실험 결과, 사용자의 위치 확인 정확도가 다른 비교 알고리즘에 비해 우수한 성능을 보여, 해당 알고리즘의 실제 환경 사용 가능성을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1642-1648
• /
• 2017

초광대역 안테나는 위성통신, 레이더, 리모트 센싱 시스템, 전파 망원경, 마이크로웨이브 화상 시스템 등의 여러가지 용도로 쓰인다. 수많은 형태의 광대역 안테나 구조들이 있으나, 테이퍼 슬롯 비발디 안테나는 가격, 무게, 스캔각도, 종형 복사, 쉬운 급전과 시스템 구성의 용이성 등의 장점이 있다. 이 논문에서는 개선된 안티포달 비발디 안테나를 제안하였다. 설계에 있어서 H자 형태의 기생패치 구조를 채택하였으며 이를 통해 전체 작동 주파수에 있어서 방사특성을 개선하는 능력을 나타내었다. 비유전율(${\epsilon}_r$) 2.2, 유전체 두께 0.7874mm의 RT/duroid 5880기판을 사용해 제안된 안테나의 시작품을 제작하고 측정한 결과 7.8-52.5GHz에 걸쳐 -10dB 반사손실 대역폭과 9-12dBi의 이득을 보였으며 이는 시뮬레이션 결과와 합리적으로 일치함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.521-526
• /
• 2018

In particular, gas sensors require characteristics such as high speed, sensitivity, and selectivity. In this study, we fabricated a $NO_X$ gas sensor by using a multi-walled carbon nanotube (MWCNT)/zinc oxide (ZnO) composite film. The fabricated MWCNT/ZnO gas sensor was then treated by a $450^{\circ}C$ temperature process to increase its detection sensitivity for NOx gas. We compared the detection characteristics of a ZnO film gas sensor, MWCNT film gas sensor, and the MWCNT/ZnO composited film gas sensor with and without the heat-treatment process. The fabricated gas sensors were used to detect $NO_X$ gas at different concentrations. The gas sensor absorbed $NO_X$ gas molecules, exhibiting increased sensitivity. The sensitivity of the gas sensor was increased by increasing the gas concentration. Additionally, while changing the temperature inside the chamber for the MWCNT/ZnO composite film gas sensor, we obtained its sensitivity for detecting $NO_X$ gas. Compared with ZnO, the MWCNT film gas sensor is excellent for detecting $NO_X$ gas. From the experimental results, we confirmed the enhanced gas sensor sensing mechanism. The increased effect by electronic interaction between the MWCNT and ZnO films contributes to the improved sensor performance.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.331-339
• /
• 2016

본 논문에서는 노령화 사회에서 노인들의 기본 건강과 생활을 케어 할 수 있는 홈 웰니스 로봇 플랫폼을 개발한다. 실내 환경에서 웰니스 서비스에 초점을 맞추어 로봇 및 센서 플랫폼을 구현한다. 로봇플랫폼에서는 정밀제어 이동기능과 정교한 로봇 팔 및 핸드를 개발하고 인간친화형 로봇구조로 설계되어진다. 이동로봇은 옴니휠 기반의 쾌속 시스템으로 제어된다. 로봇팔은 섬세한 조작기능을 수행할 수 있도록 인간의 팔과 유사한 구조로 구현한다. 센서 플랫폼에서는 RF태그와 스테레오 카메라를 활용하여 로봇자신과 대상물체의 위치 인식시스템을 구축한다. 정확한 위치와 자세 인식을 위하여 센서 융합 알고리즘이 제안된다. 끝으로 웰니스 로봇 플랫폼의 좋은 성능들이 실시간 시험 구동을 통하여 확인되어 진다.