• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.230-240
• /
• 2008

The primary aim of this study is to estimate the home range of a pair of raccoon dogs(Nyctereutes procyonoides koreensis) and to compare with the previous study of raccoon dogs in a rural area of Gurye, the southern part of South Korea. Radiotracking was regularly carried out on 2 raccoon dogs for 2 days every 2 months(in June, August, October and December, 2006). During the 2 days, radiotracking was usually conducted every $1{\sim}3$ hours through day and night. The analysis of tracking data with a total of $46{\sim}64$ bearings showed that the total home range size of the pair was $0.41km^2$, and mean home range size was $0.32km^2$ by 95% minimum convex polygons(MCP) estimate. The home ranges of the male and female were largely overlapping(about $70{\sim}95%$), and the sizes were not very much different from each other. However, there was a big difference between day $(0.01km^2)$ and night-time $(0.35km^2)$ home ranges, and it was largest in summer$(0.56km^2)$ and smallest in winter $(<0.01km^2)$. In addition, the home range of the pair included 1 core area and 4 different feeding areas. In conclusion, our raccoon dog home range data using the same individuals but with more frequent bearings per day and more extended tracking intervals still showed very similar results to the previous study with less frequent bearings per day and more extensive tracking days.

• Journal of Gastric Cancer
• /
• v.9 no.4
• /
• pp.246-255
• /
• 2009

Purpose: The objectives of this study were to investigate the impact of the number of resected lymph nodes on the survival of gastric cancer patients who underwent curative resection, and to evaluate the cut-off values that can have an influence on survival on the tumor stage-stratified analysis. Materials and Methods: The subjects were 949 gastric cancer patients who underwent curative resection at Korea University Medical Center from 1992 to 2002. They were classified according to the depth of tumor invasion, and the influence of the number of resected lymph nodes on survival was investigated. The cut-off value for the number of resected lymph nodes was determined as the smallest value that showed a significant survival difference. Results: The tumor size, location, lymph node stage, the number of metastatic lymph nodes and the number of resected lymph nodes were significantly different according to the tumor stage. The average number of resected lymph nodes was about 39, and it showed linear correlation with the number of metastatic lymph nodes. On the Cox proportional hazard model, the cut-off values of the number of resected lymph nodes, as corrected by the number of metastatic lymph nodes, was 14 for all the patients, 15 for the pT1 patients, 28 for the pT2 patients and 37 for the pT3 patients, respectively. Conclusion: Retrieving a number of lymph nodes that is more than the cut-off value could improve the survival of gastric cancer patients. Surgeons should also make efforts to perform an exact and thorough D2 lymph node dissection. Therefore, we urge surgeons to perform D2 dissection and pathologists should examine an certain exact number of lymph nodes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.194-201
• /
• 2010

Purpose: The purpose was to compare the marginal fidelity and the fracture resistance of the zirconia crowns according to the various coping designs with different thicknesses and cement types. Materials and methods: Zirconia copings were designed and fabricated with various thicknesses using the CAD/CAM system (Everest, KaVo Dental GmbH, Biberach., Germany). Eighty zirconia copings were divided into 4 groups (Group I: even 0.3 mm thickness, Group II: 0.3 mm thickness on the buccal surface and the buccal half of occlusal surface and the 0.6 mm thickness on the lingual surface and the lingual half of occlusal surface, Group III: even 0.6 mm thickness, Group IV: 0.6 mm thickness on the buccal surface and the buccal half of occlusal surface and the 1.0 mm thickness on the lingual surface and the lingual half of occlusal surface) of 20. By using a putty index, zirconia crowns with the same size and contour were fabricated. Each group was divided into two subgroups by type of cement: Cavitec$^{(R)}$ (Kerr Co, USA) and Panavia-$F^{(R)}$ (Kuraray Medical Inc, Japan). After the cementation of the crowns with a static load compressor, the marginal fidelity of the zirconia crowns were measured at margins on the buccal, lingual, mesial and distal surfaces, using a microscope of microhardness tester (Matsuzawa, MXT-70, Japan, ${\times}100$). The fracture resistance of each crown was measured using a universal testing machine (Z020, Zwick, Germany) at a crosshead speed of 1 mm/min. The results were analyzed statistically by the two-way ANOVA and oneway ANOVA and Duncan's multiple range test at $\alpha$=.05. Results: Group I and III showed the smallest marginal fidelity, while group II demonstrated the largest value in Cavitec$^{(R)}$ subgroup (P<.05). For fracture resistance, group III and IV were significantly higher than group I and II in Cavitec$^{(R)}$ subgroup (P<.05). The fracture resistances of Panavia-$F^{(R)}$ subgroup were not significantly different among the groups (P>.05). Panavia-$F^{(R)}$ subgroup showed significantly higher fracture resistance than Cavitec$^{(R)}$ subgroup in group I and II (P<.05). Conclusion: Within the limitation of this study, considering fracture resistance or marginal fidelity and esthetics, a functional ceramic substructure design of the coping with slim visible surface can be used for esthetic purposes, or a thick invisible surface to support the veneering ceramic can be used depending on the priority.

• The Korean Journal of Rehabilitation Nursing
• /
• v.4 no.2
• /
• pp.240-247
• /
• 2001

The history of rehabilitation of disabilities in Korea began with the foreigners and missionaries who were interested in it after Korean War. In 1981, Disabled Persons Welfare Act was enacted and the 88 Paralympics brought the nations attention to the welfare and rehabilitation of persons with disabilities. Since then, the facilities and the services for the disabled persons have expanded rapidly and the rehabilitation treatment and nursing intervention are drawing more attention. Against this background, the survey on the current status of disabilities, welfare service, facilities, and rehabilitation nursing was conducted. The results of this survey are as follows. 1. According to the 2000 census of disabilities, the number of persons with disabilities in Korea is estimated at 1,449,500, or 3.09% of the entire Korean population, 0.74% up from 2.35% in 1995. 2. Disability Types in 2000 The 2000 census showed that the persons with disabilities numbered 1,449,496 out of the total population and 1,024,371 persons are registered for disability, making up 70.7% of the estimated disabled population. Among them, physically disabled persons accounted for the largest 41.7% (605,127) and mentally retarded persons stood at the smallest 9% (13,481). 3. Percentage of Disability Presence The survey showed that more than 90% of disability were acquired. However, 44.8% of mental disability and 61.4% of hearing/speaking disability were not acquired after birth. This means that these disabilities happened by congenital cause or birth accident. 4. Yearly Figure of Registered Disabled Persons In 1989, 218,601 persons registered for disability and, in 2000, the number increased by 4.7 times to 1,024,371. These figures are different from the actual number of disabled persons. According to the 1995 census, 1,053,486 were disabled persons but only 378,323registered for disability. And, in the 2000 census, 1,024,371 out of the 1,449,496 of disabled persons registered for disability. 5. Welfare Service for Persons with Disability 62.6% of the total disabled people are registered and physically disabled persons accounted for the highest percentage of 96.7%. 26.5% of non-registered disabled people said that they didnt know the registration procedure. The rest of them replied that they didnt think they were disabled or that registration didnt seem to give any benefits. 6. Welfare Policies for Disabled Persons The welfare benefits given to the disabled are as follows: Issuance of disabled sign for car drivers, Permission to use LPG fuel, Communication fee reduction, Tax exemption related to cars, Reduction of public facility fees, Household allowance, Tax reduction or exemption, Medical allowance and education subsidy for children, and Housing. 7. Current Condition of Welfare Facilities by Disability Type The welfare institutions for disabilities numbered 188 in total and they can accommodate 16,823 persons. Categories of these institutions are physical disability(37), visual disability(10), hearing/speaking disability(14), mental retardation(59), and sanatoriums(68). 8. Human Resource of Rehabilitation of Disabilities Advanced education programs include rehabilitation nursing in its curriculum and this was selected as the program of Korean Academic Society of Nursing in 1990. In November 1997, Korean Academic Society of Rehabilitation Nursing was launched and many academic meeting and seminars were held. This organization is also making efforts to develop the education program for qualified rehabilitation nursing professionals and to develop the standards of rehabilitation nursing practice. In the professionals of the rehabilitation, there are rehabilitation specialist, physical therapist, speech therapist, occupational therapist. It is needed to come up with the measures to supply stable human resources following the demand of disabled persons and to recognize the private certificates for rehabilitation professionals as official ones after reviewing the education and training programs of private institutions. 9. Rehabilitation Nursing 1) Rehabilitation nursing was taught as an independent subject in 11 undergraduate programs and 9 graduate programs. 2) Research on rehabilitation nursing in Korea were 24 experimental research and 11 non-experimental research. The intervention of experimental research were mostly education and exercise rehabilitation programs. 3) In the three rehabilitation hospitals, nursing is divided into two categories, direct nursing and education & counseling. Direct nursing includes tracheostomy or nasogastric tube care, urination and defication, skin care, pain control, complication prevention and care, prevention of injury from a fall, etc.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.21-28
• /
• 2009

Purpose: The purpose of this study was to compare the wear characteristics of human enamel opposing 2 heat-pressed ceramics (e.max Press and Empress Esthetic), conventional feldspathic porcelain (Ceramco 3) and type III gold alloy. Material and methods: Intact cusps of extracted premolars were used for enamel specimens. Five disk samples were made for each of two heat-pressed ceramics groups, conventional feldspathic porcelain group and type III gold alloy group. Wear tests were conducted in distilled water using a pin-on-disk tribometer. The amount of enamel wear was determined by weighing the enamel specimens before and after wear tests, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear characteristics. Results: 1. Ceramco 3 led to the greatest amount of enamel wear followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between Ceramco 3 and Empress Esthetic (P>.05), and there were also no significant differences among Empress Esthetic, e.max Press and type III gold alloy (P>.05). 2. The average surface roughness of e.max Press after wear test was smallest followed by Empress Esthetic and Ceramco 3, but there was no significant difference between Empress Esthetic and Ceramco 3 (P>.05). 3. There were no significant differences among the depth of wear tracks of all the groups (P>.05). The group that showed the largest width of wear track was Ceramco 3 followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between e.max Press and Empress Esthetic (P>.05), and there was also no significant difference between Empress Esthetic and Ceramco 3 (P>.05). Conclusion: Within the limits of this study, heat-pressed ceramics were not more abrasive than conventional feldspathic porcelain.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.221-226
• /
• 2012

For the investigation of a possibility as a useful functional material, 6 cultivars (Takinosawa Gold, Kawanakawase Hakuto, Madoka, Yumefuji, Nagasawa Hakuho, Hong Bak) of Prunus persica L. Batsch were studied at unripe stage to determine the physicochemical properties and chemical compositions. The cultivars were picked in late May, and all samples were analyzed for external properties, physicochemical properties, pH, Brix value, Hunter's color value, hardness, vitamin C, and reducing sugar. The size of the fruit from all six cultivars was compared, and it was determined that cultivars, fruit from Madoka was the largest, while that from Yumefuji was the smallest. Comparing fresh weight, the fruit from Yumefuji was lowest in moisture contents (89.13~89.96%), and that from Nagasawa Hakuho had significantly higher crude protein (1.02~1.62%). The contents of crude lipids (0.18~0.23%) and carbohydrates (8.00~9.35%) were not significantly different between cultivars and Madoka included higher crude ash contents (0.32~0.69%) than other cultivars. The pH of 6 cultivars from unripe peaches were significantly higher from Kawanakawase Hakuto, and the Brix value was also highest from Kawanakawase Hakuto, followed by Yumefuji, Madoka, Nagasawa Hakuho, Takinosawa Gold, and Hong Bak. In chromaticity, the L value, the indicator of brightness, was significantly higher in fruit from Nagasawa Hakuho. The a value, the indicator of redness, was the highest with Hong Bak and overall lower than -5. The b value, the indicator of yellowness, was the highest in fruit from Madoka and ranged from 16.51 to 18.33. In physical characteristics, the hardness of the unripe peaches was the highest in fruit from Hong Bak, and overall, white peaches have a higher hardness value than yellow peaches. The vitamin C content of the fruit didn't show any significant differences between cultivars, and the reducing sugar showed a higher percent than 6.34% in fruit from all cultivars. These results suggest that unripe peaches were commensurate with the development of natural pigment and as a functional foods.

• Clinical and Experimental Pediatrics
• /
• v.53 no.1
• /
• pp.21-27
• /
• 2010

Purpose : In contrast with traditional time-cycled, pressure-limited ventilation, during volume-controlled ventilation, a nearly constant tidal volume is delivered with reducing volutrauma and the episodes of hypoxemia. The aim of this study was to compare the efficacy of pressure-regulated, volume controlled ventilation (PRVC) to Synchronized intermittent mandatory ventilation (SIMV) in VLBW infants with respiratory distress syndrome (RDS).Methods : 34 very low birth weight (VLBW) infants who had RDS were randomized to receive either PRVC or SIMV with surfactant administration : PRVC group (n=14) and SIMV group (n=20). We compared peak inspiratory pressure (PIP), duration of mechanical ventilation, and complications associated with ventilation, respectively with medical records. Results : There were no statistical differences in clinical characteristics between the groups. After surfactant administration, PIP was significantly lower during PRVC ventilation for 48hrs and accumulatevive value of decreased PIP was higher during PRVC ventilation for 24hrs (P<0.05). Duration of ventilation and incidence of complications was no significant difference. Conclusion : PRVC is the mode in which the smallest level of PIP required to deliver the preset tidal volume in VLBW infants with RDS, adaptively responding to compliance change in lung after surfactant replacement.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.232-239
• /
• 2016

The objective of this study was to examine the effect of photoperiod and light intensity of RBW LED (red:blue:white = 2:1:1) on the growth of Taraxacum coreanum Nakai in a fully artificial light type plant factory. 3 photoperiods and 4 light intensity were used respectively in a fully artificial light type plant production system. Plants were cultured with three photoperiods and four light intensity regimes (conditions) for 270 and 120 days, respectively, using nutrient film technique (NFT) or aeroponics culture methods. For each photoperiod, the total leaves per plant harvested 8 times in all cultivation period was 224 in the 16/8(day/light) photoperiod that had no significant difference from 220 in the 12/12 photoperiod and the lowest number of leaves was 151 occurred in the 8/16 photoperiod, which means that the longer photoperiod, the more leaves harvest. Total fresh weight of above ground was the high in order of in 16/8 photoperiod as 125g, 12/12 photoperiod as 91g, 8/16 photoperiod as 56g. For each light intensity, the total leaves per plant harvested 4 times in all cultivation period was the great in order of $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 123, $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 107, $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 95, $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 56 which was the smallest number of total leaves harvest. Total fresh weight of above ground per plant was the high in order of $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 43.6g, $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 34.6g, $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 32.2g, $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as 18.2g. From these results, it was concluded that photoperiod of 16/8 and light intensity at $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ can be used as the light condition of RBW LED (red:blue:white = 2:1:1) for optimal growth of Taraxacum coreanum Nakai in a fully artificial light type plant factory.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.245-252
• /
• 2020

The purpose of this study was intended to recognize the importance of quality control (QC) in order to reduce exposure and improve image quality by comparing the center-point (CP) of according to hospital grade and the difference between X-ray field (XF) and light field (LF) in diagnostic digital X-ray devices. XF and LF size, CP were measured in 12 digital X-ray devices at 10 hospitals located in 00 metropolitan cities. Phantom was made in different width respectively, using 0.8 mm wire after attaching to the standardized graph paper on transparent plastic plate and marked as cross wire in the center of the phantom. After placing the phantom on the table of the digital X-ray device, the images were obtained by shooting it vertically each field of survey. All images were acquired under the same conditions of exposure at distance of 100cm between the focus-detector. XF and LF size, CP error were measured using the picture archiving communication system. data were expressed as mean with standard error and then analyzed using SPSS ver. 22.0. The difference in field between the XF and LF size was the smallest in clinic, followed by university hospitals, hospitals and general hospitals. Based on the university hospitals with the least CP error, there was a statistically significant difference in CP error between university hospitals and clinics (p=0.024). Group less than 36-month after QC had fewer statistical errors than 36-month group (0.26 vs. 0.88, p=0.036). The difference between the XF and LF size was the lowest in clinic and CP error was the lowest in university hospital. Moreover, hospitals with short period of time after QC have fewer CP error and it means that introduction of timely QC according to the QC items is essential.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.488-498
• /
• 2013

A three-dimensional hydrodynamic model was applied to the Lake Euiam. The lake has three inflows, of which Gongji Stream has the smallest flow rate and poorest water. The dam-storage volume, watershed area, lake shape and discharge type of the Chuncheon Dam and the Soyang Dam are different. Therefore, it is difficult to analyze the water plume and mixing pattern due to the difference of the two dams regarding the amount of outflow and water temperature. In this study, we analyzed the effects of different characteristics on temperature and conductivity using the model appropriate for the Lake Euiam. We selected an integrated system supporting 3-D time varying modeling (GEMSS) to represent large temporal and spatial variations in hydrodynamics and transport of the Lake Euiam. The model represents the water temperature and hydrodynamics in the lake reasonably well. We examined residence time and spreading patterns of the incoming flows in the lake based on the results of the validated model. The results of the water temperature and conductivity distribution indicated that characteristics of upstream dams greatly influence Lake Euiam. In this study, the three-dimensional time variable water quality model successfully simulated the temporal and spatial variations of the hydrodynamics in the Lake Euiam. The model may be used for efficient water quality management.