• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.49-54
• /
• 2009

This study aims to compare the profitability of using small diameter logs of Quercus species in terms of net profit (ratio), net income (ratio). The small logs of Quercus species could be used for the bed logs for shiitake mushroom and Phellinus linteus, sawdust, charcoal, and wood chip. The data of cost and revenue are collected by a face-to-face survey method from the associated factories. Our results show that the profitability for Phellinus linteus production is highest because its price has been formed high due to low market competition mainly resulted from capital service cost and production technique requirement. The next is followed by Shiitake mushroom, sawdust, wood chip, and charcoal. The study also reveals that profitability for long returning periods of investment is higher than that of short returning periods.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.156-167
• /
• 2015

The aim of this study was to determine the physical and mechanical properties of glued laminated timber (glulam) manufactured from small-diameter logs of three wood species, Acacia mangium (mangium), Maesopsis eminii (manii), and Falcataria moluccana (sengon), with densities of 533, 392, and $271kg/m^3$, respectively. Glulam measuring 5 cm by 7 cm by 160 cm in thickness, width, and length, respectively, was made with three to five lamina, or layers, and isocyanate adhesive. The glulams contained either the same wood species for all layers or a combination of mangium face and back layers with a core layer of manii or sengon. Solid wood samples of the same size for all three species were included as a basis for comparison. Physical-mechanical properties and delamination tests of glulam referred to JAS 234:2003. The results showed that the properties of same species glulam did not differ from those of solid wood, with the exception of the shear strength of glulam being lower than that of solid wood. Wood species affected glulam properties, but three- and five-layer glulams were not different except for the modulus of elasticity. All glulams were resistant to delamination by immersion in both cold and boiling water. The glulams that successfully met the JAS standard were three- and five-layer mangium, five-layer manii, and five-layer mangium-manii glulams.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.361-371
• /
• 2024

This study was conducted to develop models of the xylem volume utilization rate and merchantable log utility rate of the Japanese larch (Larix kaempferi [Lamb.] Carrière), a major commercial species in South Korea. To develop these models, models were fitted together for the xylem volume utilization rate and merchantable log utility rate to the total stem volume. Data on the logs bucked by cut-to-length usage in the forestry field were used for modeling, and the tree diameter at breast height (DBH) and small-end diameter of the last log were used as major predictor variables. Considering the difference in the bucking rate between all logs and solely long-length logs, the models for merchantable log utility rate were classified into two types: short- and long-length logs as well as only long-length logs. Consequently, the models were significantly developed, and the predicted values showed high accuracy within the range of observed values. The tables for bucking rate by cut-to-length log usage were finally provided by applying the models of the xylem volume utilization rate and merchantable log utility rate. Because the bucking rate for all logs and long-length logs can be easily calculated with the easy-to-use DBH and the required small-end diameter of the last log, the developed models are highly expected to be applicable for predicting the timber assortment using the cut-to-length log usage.

• Journal of the Korea Furniture Society
• /
• v.20 no.3
• /
• pp.198-204
• /
• 2009

Less used small diameter logs of black locust were heated at $250^{\circ}C$ for improving utilization. The volatile compounds emitted by the heated logs were analyzed. Their effect of formaldehyde absorption was evaluated with PB. Ester and acid compounds were dominant in content. Especially, methyl acetate and acetic acid showed the highest contents. The total content of aromatic compounds decreased as heating time increased. Amoung ketone compounds, The contents of 2-propanone, 2-pentanone, 3-petanone, 3-hexanone and cyclopentenone decreased with the increase of heating time, but the others did not. The contents of the chemicals, furfural and 3-pentanol, increased with heating time, while that of 2-methyl butanal decreased. It was hard to say that formaldehyde was absorbed by the heated black locust samples. Some decorative goods were designed with the heated logs.

• Journal of the Korea Furniture Society
• /
• v.12 no.2
• /
• pp.19-27
• /
• 2001

This study was carried out to investigate the mechanical properties of woods treated with 30% aqueous solution of PEG 1000. Compressive, bending and shearing strengths were slightly decreased by PEG treatment. Absorbed energy in impact bending did not show any significant differences between untreated and PEG-treated woods.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.163-171
• /
• 2011

Because Japanese cedar shows lower mechanical performance, glued-laminated timber (glulam) can be a better way to utilize Japanese cedar for structural purpose. However, low yield of higher grade lamination from log makes it difficult to design structural glulam. This study was aimed to increase the yield of higher grade lamination and provide higher efficiency of manufacturing structural lamination by ultrasonic log sorting technology. Logs were sorted by an existing log grading rule regulated by Korea Forest Research Institute (KFRI). It was found that the KFRI log grading rule contributed to finding better logs in viewpoint of the volumetric yield and it can reduce the number of rejected lumber by visual grading. However, it could not identify better logs to produce higher-grade products. To find an appropriate log-sorting-method for structural products, log diameter and ultrasonic time of flight (TOF) for the log were considered as factors to affect mechanical performance of resulting products. However, it was found that influence of log diameter on mechanical performance of resulting products was very small. The TOF showed a possibility to sort logs by mechanical performance of resulting products even though a coefficient of correlation was not strong (R = 0.6). In a case study, the log selection based on the ultrasonic TOF of the log increased the yield of the outermost tension lamination (E8 or better grade, KS F 3021) from 2.6% to 12.5% and reduced LTE5 (lower than E5 grade) lamination from 43.6% to 10.3%, compared with the existing KFRI log grading rule.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.337-345
• /
• 2013

Log grading rules are essential tools to ensure the quality of logs in distribution structure. The rules should reflect the long experience and accepted usage practice in the market. A gap between the rules and market should be improved based on analysis of log qualities that produced and market demand. In this study more than ten millions logs which were produced by 5 Regional Forest Services in 2010~2011 period, were analyzed in their qualities including diameters and lengths by species. A proposal was driven to improve the current log grading rules in terms of log diameter classes and length. The followings are the summary of this study. Most of domestic softwood logs are belong to small diameter class of 100~160 mm, which imply the diameter classes of current log grading rules are immoderate. Distributions of log diameter shows distinctive patterns by species, which indicate a necessity of differentiated diameter classes by species in an improved rules. Lengths of logs in productions do not corresponding to the demands and preferences in sawmills. Therefore it is highly recommended to include log length term in an improved log grading system. Based on these findings, 6 log grading systems for 3 species groups of softwood are newly proposed to improve current log grading rules. Limits of log diameter and log length are also proposed for each log grading system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.52-59
• /
• 2015

Cross-cut disks from small diameter oak logs were thermally modified and developed to make accessories such as a brooch. However it is known that domestic oaks are refractory and it is hard to dry their cross-cut disks without any drying defects. The cross-cut disks of Quercus variabilis (7 mm long in the longitudinal direction) were forced to dry in air at two different air velocities in summer and fall season, and their drying yields were investigated. Under the same condition, the average final moisture contents (MCs) of the specimens dried in the fall were lower than those dried in the summer. The average final MCs of the small diameter specimens dried at higher air velocity were slightly lower than those at lower air velocity while those of the large diameter specimen were not influenced by the air velocity. The number of the large diameter specimens with cross checkings was higher than that of the small diameter specimen. This discrepancy between two different diameters was twice in the fall, while it was more than four times in the summer. The large diameter specimens dried at low air velocity in Summer were cross-checked most, which was attributed to repeated water condensation and evaporation due to high humidity and low air velocity.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.58-65
• /
• 2002

This research was carried out to develop field treatment techniques of thinned small diameter softwood logs and less utilized hardwood logs using sap displacement method. In this paper, we report the feasibility of using transpiration method and butt-end method for the treatment of three softwood species and three hardwood species with preservatives, fire-retardant chemicals, and dimensional stabilizer. Butt-end method was effective as a field treatment technique compared to transpiration method when considered the treatability, easiness of treatment, productivity of treated wood, and environmental aspects related to chemical treatment, regardless of the combination of wood species and chemicals.