• 한국기계연구소 소보
• /
• s.17
• /
• pp.145-156
• /
• 1987

A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.519-524
• /
• 1999

In order to assess the estimtions of CN for a small agricultural watershed using the satellite image, TM image from Landsat-5 was classsified by MLC. CN for each pixels in the image was estimaed using the results. For the estimation enhancing , it was tried that each land use area in a pixel was estimated by the mixel assumption and the averaged CN by weight areas. Those resutls were applied for the actual hydrologic analyses were highly concerned with the observed runoff discharge and more enhanced on the mixel assumption.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.352-361
• /
• 2013

Combining multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) with a massive number of transmit antennas (massive MIMO-OFDM) is an attractive way of increasing the spectrum efficiency or reducing the transmission energy per bit. The effectiveness of Massive MIMO-OFDM is strongly affected by the channel state information (CSI) estimation method used. The overheads of training frame transmission and CSI feedback decrease multiple access channel (MAC) efficiency and increase the CSI estimation cost at a user station (STA). This paper proposes a CSI estimation scheme that reduces the training frame length by using a novel pilot design and a novel unitary matrix feedback method. The proposed pilot design and unitary matrix feedback enable the access point (AP) to estimate the CSI of the signal space of all transmit antennas using a small number of training frames. Simulations in an IEEE 802.11n channel verify the attractive transmission performance of the proposed methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4170-4188
• /
• 2014

In this study, we present a denoising algorithm for high-frame-rate videos in an ultra-low illumination environment on the basis of Kalman filtering model and a new motion segmentation scheme. The Kalman filter removes temporal noise from signals by propagating error covariance statistics. Regarded as the process noise for imaging, motion is important in Kalman filtering. We propose a new motion estimation scheme that is suitable for serious noise. This scheme employs the small motion vector characteristic of high-frame-rate videos. Small changing patches are intentionally neglected because distinguishing details from large-scale noise is difficult and unimportant. Finally, a spatial bilateral filter is used to improve denoising capability in the motion area. Experiments are performed on videos with both synthetic and real noises. Results show that the proposed algorithm outperforms other state-of-the-art methods in both peak signal-to-noise ratio objective evaluation and visual quality.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.87-97
• /
• 2020

In this study, the applicability of the geostatistical evolution strategy as an inverse analysis method of estimating hydraulic properties of small-scale basin was tested. The geostatistical evolution strategy is a type of data assimilation method that can effectively estimate aquifer hydraulic conductivity by combining a global optimization model of the evolution strategy and a local optimization model of the ensemble Kalman filtering. In the applicability test, the geometry, hydraulic boundary conditions, and the distribution of groundwater monitoring wells of Hanlim-Eup were employed. On the other hand, a synthetic hydraulic conductivity distribution was generated and used as the reference property for ease of estimation quality assessment. In the estimations, two different cases were tested where, in Case I, both groundwater levels and hydraulic conductivity measurements were assumed to be available, and only the groundwater levels were available, in Case II. In both cases, the reference and estimated hydraulic conductivity fields were found to show reasonable similarity, even though the prior information for estimation was not accurate. The ability to estimate hydraulic conductivity without accurate prior information suggests that this method can be used effectively to estimate mathematical properties in real-world cases, many of which little prior information is available for the aquifer conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.11-22
• /
• 2007

This paper is to discuss analytical techniques to estimate demand sizes and volumes that determine optimal locations for multiple facilities for a given services. While demand size estimation is a core part of location modeling to enhance solution quality and practical applicability, the estimation method has been used in limited and restrict parts such as a single population centroid in a given larger census boundary area or small theoretical application experiments(e.s. census track and enumeration district). Therefore, this paper strives to develop an analytical estimation method of demand size that converts area based demand data to point based population weighted centroids. This method is free to spatial boundary units and more robust to estimate accurate demand volumes regardless of geographic boundaries. To improve the estimation accuracy, this paper uses house weighted value to the population centroid calculation process. Then the population weighted centroids are converted to individual demand points on a grid formated surface area. In turn, the population weighted centroids, demand points and network distance measures are operated into location-allocation models to examine their roles to enhance solution quality and applicability of GIS location models. Finally, this paper demonstrates the robustness of the weighted estimation method with the application of location-allocation models.

• Atmosphere
• /
• v.27 no.4
• /
• pp.467-481
• /
• 2017

A correction method of reflectivity in partial beam blockage (PBB) area is suggested, which is based on the combination of digital terrain information and self-consistency principle between polarimetric observation. First, the reflectivity was corrected by adding the radar energy loss estimated from beam blockage simulation using digital elevation model (DEM) and beam propagation geometry in standard atmosphere. The additional energy loss by unexpected obstacles and non-standard beam propagation was estimated by using the coefficient between accumulated reflectivity ($Z_H$) and differences of differential phase shift (${\Phi}_{DP}$) along radial direction. The proposed method was applied to operational S-band dual-polarization radar at Jindo and its performance was compared with those of simulation method and self-consistency method for six rainfall cases. When the accumulated reflectivity and increment of ${\Phi}_{DP}$ along radial direction are too small, the self-consistency method has failed to correct the reflectivity while the combined method has corrected the reflectivity bias reasonably. The correction based on beam simulation showed the underestimation. For evaluation of rainfall estimation, the FBs (FRMSEs) of simulation method and self-consistency principle were -0.32 (0.59) and -0.30 (0.57), respectively. The proposed method showed the lowest FB (-0.24) and FRMSE (0.50). The FB and FMSE were improved by about 18% and by 19% in comparison to those before correction (-0.42 and 0.70). We can conclude that the proposed method can improve the accuracy of rainfall estimation in PBB area.

• Environmental and Resource Economics Review
• /
• v.12 no.4
• /
• pp.545-557
• /
• 2003

A new semiparametric estimator of a dichotomous choice contingent valuation model is proposed by adapting the well-known density weighted average derivative of the regression function. A small sample behavior of the estimator is demonstrated very briefly by a simulation and the estimator is applied to estimate the WTP for preserving the Dong River area in Korea.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.239-242
• /
• 2017

Although camera traps have been widely used to understand the abundance of wildlife in recent decades, the effort has been restricted to small sub-set of wildlife which can mark-and-recapture. The Random Encounter Model shows an alternative approach to estimate the absolute abundance from camera trap detection rate for any animals without the need for individual recognition. Our study aims to examine the feasibility and validity of the Random Encounter Model for the density estimation of endangered leopard cats (Prionailurus bengalensis) in Maekdo riparian park, Busan, South Korea. According to the model, the estimated leopard cat density was $1.76km^{-2}$ (CI 95%, 0.74-3.49), which indicated 2.46 leopard cats in $1.4km^2$ of our study area. This estimate was not statistically different from the previous leopard cat population count ($2.33{\pm}0.58$) in the same area. As follows, our research demonstrated the application and usefulness of the Random Encounter Model in density estimation of unmarked wildlife which helps to manage and protect the target species with a better understanding of their status.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.585-595
• /
• 2007

Representative impacts and effectiveness of surface meteorological observation data assimilation were examined in order to use wind resources estimation around southern coastal area of the Korean Peninsula. The data used in study are observational wind and temperature data at 5 and 41 sites of Regional Meteorological Offices and Automatical Weather Systems, respectively. Observation wind speed data tends to show small effective radius with limited area. Especially assimilation impacts of data observed at peninsula type sites like Yeosu play only around the inside of the peninsula. This limited effective radius for wind speed is caused by the strong correlation between topography and wind speed. And the efficient radius for surface air temperature is larger than that of wind. Data assimilation for observational air temperature is useful to increase the accuracy of wind energy estimation. However assimilation of wind data requires special care in its application due to high sensitivity of topographical complexity.