• Journal of Korea Water Resources Association
• /
• v.55 no.3
• /
• pp.245-255
• /
• 2022

Evaluating the qualitative the qualitative process of water resources by using various indicators, as one of the most prevalent methods for optimal managing of water bodies, is necessary for having one regular plan for protection of water quality. In this study, zoning maps were developed on a yearly basis by collecting and reviewing the process, validating, and performing statistical tests on qualitative parameters҆ data of the Iranian aquifers from 1995 to 2020 using Geographic Information System (GIS), and based on Inverse Distance Weighting (IDW), Radial Basic Function (RBF), and Global Polynomial Interpolation (GPI) methods and Kriging and Co-Kriging techniques in three types including simple, ordinary, and universal. Then, minimum uncertainty and zoning error in addition to proximity for ASE and RMSE amount, was selected as the optimum model. Afterwards, the selected model was zoned by using Scholar and Wilcox. General evaluation of groundwater situation of Iran, revealed that 59.70 and 39.86% of the resources are classified into the class of unsuitable for agricultural and drinking purposes, respectively indicating the crisis of groundwater quality in Iran. Finally, for validating the extracted results, spatial changes in water quality were evaluated using the Groundwater Quality Index (GWQI), indicating high sensitivity of aquifers to small quantitative changes in water level in addition to severe shortage of groundwater reserves in Iran.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.232-238
• /
• 2010

The objective of this study was to investigate a small sewage treatment system. This system was developed to improve a nitrogen and phosphorus removal efficiency and generate less solid using upflow septic tank(UST) - aerobic filter(AF) system. The UST equipped with an aerobic filter, the filter was fed with both raw sewage and recycled effluent from the UST to induce the denitrification and solid reduction simultaneously. Overall removal efficiencies of COD and total nitrogen(TN) were above 96% and 73% at recycle ratio of 200%, respectively. Critical coagulant dose without the biochemical activity was found to be 40 mg/L. Removal efficiency of total phosphorus(TP) in influent was above 90% by chemical and biological reactions. Although the phosphorus concentration was low under the high alkalinity in raw sewage, the pH value was unchanged by the coagulant dose.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.556-560
• /
• 2001

Remote field eddy current testing (RFECT) with through-wall transmission characteristic is being applied to pipes ranging from small tubes of heat exchanger to natural gas supply pipelines. Cast iron pipes with nominal diameter of 100mm are used primarily as the waterline pipes. The leakage of water occurs due to defects in the pipes caused by vibration of automobiles and corrosion. But, the use of direct inspection methods such as insertion of inspection equipment inside the pipelines has been limited due to its lack of economical efficiency. Economical development of inspection equipments is possible since RFECT method can be easily employed for system integration and quantitative evaluation of both inside and outside defects. In this study, the development of underground pipeline inspection system was tarried out by using RFECT method in consideration of the characteristics of waterline network. This paper specifically describes the design and production of RFECT pipeline inspection pig using centralizer mechanism, development of remote field eddy current signal acquisition and processing software, and review of RFECT system operation procedures.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.64-81
• /
• 2016

To analyze the influence of various groundwater flow rates (specific discharge) on BHE system with balanced and unbalanced energy loads under assuming same initial temperature (15℃) of ground and groundwater, numerical modeling using FEFLOW was used for this study. When groundwater flow is increased from 1 × 10⁻⁷ to 4 × 10⁻⁷m/s under balanced energy load, the performance of BHE system is improved about 26.7% in summer and 22.7% at winter time in a single BHE case as well as about 12.0~18.6% in summer and 7.6~8.7% in winter time depending on the number of boreholes in the grid, their array type, and bore hole separation in multiple BHE system case. In other words, the performance of BHE system is improved due to lower avT in summer and higher avT in winter time when groundwater flow becomes larger. On the contrary it is decreased owing to higher avT in summer and lower avT in winter time when the numbers of BHEs in an array are increased, Geothermal plume created at down-gradient area by groundwater flow is relatively small in balanced load condition while quite large in unbalanced load condition. Groundwater flow enhances in general the thermal efficiency by transferring heat away from the BHEs. Therefore it is highly required to obtain and to use adequate informations on hydrogeologic characterristics (K, S, hydraulic gradient, seasonal variation of groundwater temperature and water level) along with integrating groundwater flow and also hydrogeothermal properties (thermal conductivity, seasonal variation of ground temperatures etc.) of the relevant area for achieving the optimal design of BHE system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.59-65
• /
• 2013

In recent years, the crisis of energy is growing seriously and also the contamination of ecology has been reverberated as international problem. The social concerns on energy crisis have been growing for the last several years and also the interests in new and renewable energy have been increased. Therefore, in order to solving these problems, as solution of one, this paper is investigated using the aeration system at the fish farm, etc from nature energy such as wind power. This study suggests the fundamental data of designing for these similar apparatus and examines the parameters of wind velocity and wind receiving area. Especially, the water outlet position was mainly investigated with optimum outlet angle of wind pump.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2023

Demands for eco-friendly food materials are increasing rapidly because of increased interest in well-being and health care, deterioration of air quality due to fine dust, and various soil and water pollution. Aquaponics is a system that can solve various problems such as economic activities, environmental problems, and safe food provision of the elderly population. However, techniques for deriving the optimal growth environment should be preceded. In this paper, we intend to design an intelligent plant growth measurement system that considers the characteristics of existing aquaponics. In particular, we would like to propose a module configuration plan for learning data and judgment systems when providing a uniform growth environment, focusing on designing systems suitable for production sites that do not have high-performance processing resources among intelligent aquaponics production management modules. It is believed that the proposed system can effectively perform deep learning with small analysis resources.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.185-193
• /
• 2020

There have been many studies on the calcination of oyster shells in the perspective of recycling of resources. The quicklime made by the calcination of oyster shells is used either as it is or after reacting with water to transform to liquid lime before being used. However, the liquid lime made from calcined oyster shells show slightly different properties from that of limestone. In this study, to compare these properties of oyster shell with those of limestone, the samples were calcined and reacted with water at various temperatures to transform to a liquid lime and filtered using 150 ㎛ sieves to calculate the transform rate to liquid lime. The calcined limestone was transformed to liquid lime at all temperatures, but calcined oyster shell did not show any transformation at 30℃ and 50℃ under the experimental conditions of this study, and rather increased the weight for the remaining after filtration due to the presence of Ca(OH)₂ produced by the reaction with water, Even at 90℃, the transformation rate of calcined oyster shell to liquid lime was lower than that of limestone. This difference in oyster shell can be explained partly by the preventing calcined one from reacting with water by conchiolin which is protein found in the prismatic and pearl layers of oyster shell. Conchiolin is also known to be stable and does not decompose even at high temperature. However, even the calcined chalk layer without conchiolin shows lower transformation rate than that of calcined limestone, probably due to the small amount of Na in oyster shell, which may cause additional reaction including eutectic melt during calcination process.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.377-392
• /
• 2012

It has been known that small solid particles act as a stabilizer in pickering emulsion system. In this study, we successfully prepared stable pickering emulsion in n-hexylalcohol and water system with $TiO_2$ whose surface was treated by alkylsilane. The optimum condition to prepare pickering emulsion stabilized by $TiO_2$ particles was determined by amount of $TiO_2$ particles and ratio of water and oil phase. The type of pickering emulsion was dependent on wettability of particles for water and n-hexylalcohol. When the amount of $TiO_2$ particles increased up to 5.00 wt%, the stability of pickering emulsion was showed to be improved. The most stable pickering emulsion was prepared in the case of W/O type which has the ratio of oil and water phase (3 : 7). We tried to prepare porous $SiO_2-TiO_2$ composite pigments using a pickering emulsion as template at the optimal condition. Porous pigments were synthesized with Ludox HS-30 as an inorganic material by sol-gel process. The characteristics and shape of porous pigments were measured by optical microscope, SEM, BET, XRD and EDS.

• Journal of Korea Water Resources Association
• /
• v.40 no.7
• /
• pp.533-543
• /
• 2007

This study characterized and qualitatively analyzed the storm events recorded in the Annals of Chosun Dynasty. First of all, the storm events are retrieved using the like Keun-Bi (big rain), Keun-Mul (high water), Hong-Soo (flood), and Pok-Woo (torrential rain). The storm events cited as Keun-Bi do not include any in detail explanation about the storm and damages, but the storm events cited as Keun-Mul, Hong-Soo, and Pok-Woo generally include in detail information. That is, the Keun-Bi was named simply based on the amount of rainfall, but the other three were named considering the runoff with significant damages. Evaluation of effective rainfall derived by the simple SCS method showed that most storm events named Keun-Bi had small antecedent five day rainfall amount to be categorized into AMC-1, but the others mostly into AMC-III. As result, the effective rainfall of Keun-Mul, Hong-Soo, and Pok-Woo were estimated much higher than those of Keun-Bi. Most storm events with lengthy explanation belong to the events with lots of damages, which also includes Keun-Mul, Hong-Soo, and Pok-Woo.