• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.129-145
• /
• 2017

In this study, the use of a micro gas turbine system using biogas to supply heating, cooling and electricity loads of a rural building located in rural area around Tehran has been studied. Initially, the amount of energy needed by the farmhouse was calculated and then the number of needed microturbines was determined. Accordingly, the amount of substances entering biogas digester as well as tank volume were determined. The results of this study showed that village house loads including electrical, heating and cooling and hot water loads can be supplied by using a microturbine with a nominal power of 30 kW and $33.5m^3/day$ of biogas. Digester tank and reservoir tank volumes are $67m^3$ and $31.2m^3$, respectively. The cost of electricity produced by this system is 0.446 US$/kWh. For rural area in Iran, this system is not compatible with micro gas turbine and IC engine system use urban natural gas due to low price of natural gas in Iran, but it can be compatible by wind turbine, photovoltaic and hybrid system (wind turbine& photovoltaic) systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.154-162
• /
• 2006

By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well, and have faster rotation speed to increase drying ability. To meet such demands, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Shaft is connected from the flange to insert production, transferring power from the motor to drum, and mainly acting as stiffness against the horizontal weight of the shafting system. In this paper, strength analysis and experiment were executed on both the shaft and flange of front-loaded washing machine to suggest the design improvement of shafting system for big capacity, high-rotation drying. Also, verification of this evaluation was executed on fracture strength and fatigue life for studied shaft system.

• Hwankyungkyoyuk
• /
• v.9 no.1
• /
• pp.72-89
• /
• 1996

Environmental problem and eco-crisis don't mean pollution itself any more, although general people have believed that environmental problems can be resolves by removing pollution. The mos important is environmental problems are linked with social structure which individualism, rationalism is extremely prevailed in the market oriented capitalism society, so public value is ignored especially. In the point of environmental education, this is very important because environmental education is not completed through schooling process, such s class learning, discussion. observation etc, but in the our practical life itself. This means that environmental education can be done by changing of lifestyle anywhere we live, and anytime. But any places governed our social life are polluted by efficiency pursuiting individualism in market oriented capitalism society. So environmental education can't hold the water in this system, in the aspect that we can't stimulate feelings of the student and general people, getting to public resource value and harmony with nature by throwing individual mind away. It is big problem. In this field, I have thought the unique space and social structure which can be used as environmental education place is small-planning community, such as Kibbutz in Israel, educational community Finhorn in Scotland, harmony community Yamagicism Village in Japan and DURE in Korea etc. For the research of this educational possibility in these small community, I visited and investigated immediately, and confirmed. In this thesis, I insist that the training process and practical life experience in this community themselves are good environmental education. So, in case of YAMAGICISM in Japan and FINDHORN in Scotland, DONGSASUP program in Korea, I introduce these small community environmental- education program.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.988-995
• /
• 2020

Air gun shock systems are commonly used as alternative explosion energy sources for underwater explosion (UNDEX) shock tests owing to their low cost and environmental impact. The airbag inflator of automotive airbag systems is also very useful to generate extremely rapid underwater gas release in labscale tests. To overcome the restrictions on the very small computational time step owing to the very fine fluid mesh around the nozzle hole in the explicit integration algorithm, and also the absence of a commercial solver and software for gas UNDEX of airbag inflator, an idealized airbag inflator and fluid mesh modeling technique was developed using nozzle holes of relatively large size and several small TNT charges instead of gas inside the airbag inflator. The objective of this study is to validate the results of an UNDEX response analysis of one and two idealized airbag inflators by comparison with the results of shock tests in a small water tank. This comparison was performed using the multi-material Arbitrary Lagrangian-Eulerian formulation and fluid-structure interaction algorithm. The number, size, vertical distance from the nozzle outlet, detonation velocity, and lighting times of small TNT charges were determined. Through mesh size convergence tests, the UNDEX response analysis and idealized airbag inflator modeling were validated.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.1
• /
• pp.13-33
• /
• 2021

Successful sediment management at the watershed scale requires an understanding of the erosion, transport and sedimentation processes at the specific site scale. However, studies on the sediment runoff characteristics in a small uppermost watershed, which serves as a sediment supply function, are very rare. Therefore, this study attempted to investigate the fluctuations in major sediment supply areas and sediment runoff in the uppermost mountain small watershed, and for this purpose, ArcSWAT (Soil and Water Assessment Tools with GIS interface) was applied to the Woldong reservoir catchment located in Gosam-myeon, Anseong-si, Gyeonggi-do. The model results were manually calibrated using the monitoring data of the Woldong reservoir sedimentation rate from 2005 to 2007. It was estimated that annual average of 34.4 tons/year of sediment was discharged from the Woldong reservoir basin. This estimate almost coincided with the monitoring data of the Woldong reservoir during the low flow period but tended to be somewhat underestimated during the high flow period. Although the SWAT model does not fully reflect the erosion process of gully and in-channel, this underestimation is probably due to the spatial connectivity of sediment transport and the storage and reactivation of the sediment being transported. Most of the forested hillslopes with a well-developed organic horizon were evaluated as having a low risk of erosion, while the places with the highest risk of erosion were predicted to be distributed in the logged area with some weeds or shrubs (classified as pasture) with relatively steeper slopes, and in the bare land. The results of this study are expected to be useful in developing strategies for sediment control and reservoir management.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.73-86
• /
• 2006

Concentrated poultry production in the State of Alabama, U.S.A. results in excessive poultry litter. Application of poultry litter to pastures and row crops serves as a cheap alternative to commercial fertilizer. However, over the years, poultry litter application to perennial forage crops in the Appalachian Plateau region of North Alabama has resulted in phosphorus (P) buildup in soils. Phosphorus index (P-index) and comprehensive nutrient management plans (CNMP) are often used as a best management practice (BMP) for proper land application of litter. Because nutrient management planning is often not done for small animal feeding operations (AFOs), and also because, in case of excess litter, litter transportation infrastructure has not been developed, over application of poultry litter to near by area is a common practice. To alleviate this problem, optimal poultry litter management and transportation infrastructure needs to be developed. This paper presents a methodology to optimize poultry litter application and transportation through efficient nutrient management planning and transportation network analysis. The goal was accomplished through implementation of three important modules, a P-Index module, a CNMP module, and a transportation network analysis module within ArcGIS, a Geographic Information System (GIS). The CNMP and P-Index modules assist with land application of poultry litter at a rate that is protective of water quality, while the transportation network analysis module helps transport excess litter to areas requiring litter in the Appalachian Plateau and Black Belt (a nutrient-deficient area) regions. Once fully developed and implemented, such a system will help alleviate water quality problems in the Appalachian Plateau region and poor soil fertility problems in the Black Belt region by optimizing land application and transportation. The utility of the methodology is illustrated through a hypothetical case study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.163-166
• /
• 2002

The underwater acoustic communication has been widely applied to various objects such as ocean exploration-development and military affairs. And recently for embodiment of the communication system that is installed in a submarine and underwater work system, many studies have been progressing. This scope of the main studies in the meantime. It made it possible for a diver and a scuba diver who arc difficult to notice the situation of the outside because of staying in the water to hear a sound through a small speaker by using a ultra sound transducer that a central frequency is 32KHz after modulation of a voice to give the information of the outside. Also in case of happening an emergency to a diver in the water, it made him/her ask for help to a person in the outside by pressing a key and send a letter data to a person in the outside by using a keyboard. Through this system, it is possible to send a voice or data between the underwater and the outside and it is available to a diver or skin scuba diver.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1373-1378
• /
• 2018

In order to solve the problems such as reduction of agriculture population, aging and declining of grain self sufficiency rate, agriculture ICT convergence technology utilizing IoT technology is actively being developed. Agricultural ICT technology only concentrates on facility houses, and there is no automated control system in the field of cultivation. In this paper, we propose an irrigation control system that automatically controls the solenoid valves and water pumps in a large area with Lora wireless communication. The proposed system does not require a separate power source by using a small solar panel, and it is very convenient to install and operate supporting wireless auto setup by plug-and-play method. Therefore, it is expected that it will contribute to the reduction of labor force, quality of agricultural products, and productivity improvement.

• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.21-31
• /
• 2021

Yeast strains are capable of hydrolyzing non-digestible saccharides, such as melibiose, raffinose, and stachyose, found in soy meal components. This study revealed the biochemical properties of fermented soybean meal during 72 hours with kefir. Starchyose and raffinose, non-digestible components, were almost digested in kefir 150 mL + soybean meal 500 g + water 70 mL and galactose was produced. Proteolysis of the soybean meal produced most of the small molecule peptides in kefir 150 mL + soybean meal 500 g + water 70 mL. The production of the vitamin B group and C were the highest in kefir 250 mL + soybean meal 500 g. The yeast number of the fermented soybean meal was 7.0 × 10⁶ CFU·mL^-1 which was the highest in kefir 250 mL + soybean meal 500 g. The lactic acid bacteria of the fermented soybean meal was the highest at 3.5 × 10⁹ CFU·mL^-1 in kefir 70 mL + soybean meal 500 g. The antioxidant effect was the highest at 57% in kefir 250 mL + soybean meal 500 g. Expression of inflammation-related cytokine (interleukin [IL]-1β, tumor necrosis factor [TNF]-α, and interleukin [IL]-6) was significantly inhibited in fermented soybean meals with different treatments. These results suggest that fermented soybean meal by kefir has an antiinflammatory and anti-oxidation activity and could be utilized in feed manufacturing, and inhydrolyzing non-digestible soy meal components.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.170-178
• /
• 1988

An automated ultrasonic flaw detection system was developed for thin-walled and short tubes such as Zircaloy-4 tubes used for cladding heavy-water reactor fuel. The system was based on the two channels immersion pulse-echo technique using 14 MHz shear wave and the specially developed helical scanning technique, in which the tube to be tested is only rotated and the small water tank with spherical focus ultrasonic transducers is translated along the tube length. The optimum angle of incidence of ultrasonic beam was 26 degrees, at which the inside and outside surface defects with the same size and direction could be detected with the same sensitivity. The maximum permissible defects in the Zircaloy-4 tubes, i.e., the longitudinal and circumferential v notches with the length of 0.76mm and 0.38mm, respectively and the depth of 0.04 mm on the inside and outside surface, could be easily detected by the system with the inspection speed of about 1 m/min and the very excellent reproducibility. The ratio of signal to noise was greater than 20 dB for the longitudinal defects and 12 dB for the circumferential defects.