• 응용통계연구
• /
• 제24권6호
• /
• pp.1129-1138
• /
• 2011

지방자치제가 정착되면서 시군구와 같은 소지역 단위의 실업률에 대한 통계는 실업대책이나 고용지원 사업을 위한 예산 편성과 같은 지역 노동시장정책의 수립은 물론 정책 집행 후 그에 대한 사후평가를 하는데 있어서도 중요한 기준을 제공해주기 때문에 지자체 기관장들의 관심의 대상이 되고 있는 실정이다. 그러나 경제적, 시간적으로 많은 제약이 따르는 기초자치단체에서 지속적으로 실업률 통계를 생산하는 데에는 자료의 신뢰성, 연속성및 시의성 면에서 많은 문제를 노정하고 있다. 본 연구에서는 소지역 실업률 추정치에 대한 신뢰성(변동계수 25% 이하)을 확보하면서 통계생산에 소요되는 조사비용을 최소화할 수 있는 효율적인 추정법 및 최소 표본조사구 수를 모의실험을 통하여 제시하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.

• 한국직업건강간호학회지
• /
• 제10권1호
• /
• pp.55-65
• /
• 2001

The purpose of this study was to find out the status of occupational health management and the degree of recognition about the occupational health management of employees 248 small-scale enterprises which have been managed by the small-scale enterprises health care management support institution in 1999, were selected for study, in Kwang-Ju City. 98 employees were selected in 116 industries of them to grasp recognition of employees about the occupational health management. ► The Status of Occupational Health Management 1. Of the sample industries, 62.1 percent employed eleven to twenty-nine workers. Of the sample workers, 72.1 percent occupied workers who were engaged in the production line. 2. Environment evaluation was made on 82.7 percent of the sample industries and general exam made on 66.5 percent and specific health exam done on 73.4 percent. 3. The harmful factors in the sample industries were found to lie noise, dust, solvent, heavy metal, etc. 4. In general health exam 1,774 workers were participated and 148 workers got the result of above grade C and were diagnosed as having the problems with digestive system (63.6%), circulatory system(20.6%). etc. ► The Degree of Recognition about The Occupational Health Management of Employees. 1. Respondents were mainly in the twenties (42.9%), males(69.1%), duration of working period of five to ten years(24.0%), office workers(51.0%), monthly income under one million(55.7%). 2. Recognition of employees about the occupational health management consists of workplace environmental evaluation, health education, health exam and protector management. Their recognition on health education showed high score (mean 3.1), but generally the score was low(mean 2.9).

• Journal of the Korean Data and Information Science Society
• /
• 제28권5호
• /
• pp.1153-1165
• /
• 2017

구조방정식모형은 사회과학 및 행동과학 연구 분야에서 이론검정을 위해 주로 사용되는 통계방법이다. 최근 이 통계기법에 대한 방법론적 이슈로서 모형명세화 오류와 소표본 문제가 부각되고 있다. 그런데 이 문제들이 구조방정식모형의 대표 추정 방법인 최대우도법에 위한 이론검정에 어떤 영향을 주는지에 대해 여전히 명확하지 않다. 따라서 본 연구에서 최대우도법 그러고 이에 대한 대안으로 개발된 2단계최소자승법과 2단계능형최소자승법을 정확도와 검정력 관점에서 시뮬레이션을 통해 체계적으로 비교해 본다. 이 실험 결과에 따르면, 모형이 정확하게 설정된 경우, 정확도 기준에서 추정방법들 간의 차이는 미미했다. 하지만 모형오류가 발생한 경우, 2단계능형최소자승법은 다른 방법들보다 표본 크기가 작을 때 훨씬 더 정확한 모수추정치를 산출해 내었다. 그러고 이 방법은 명세화 오류에 관계없이 표본 크기가 작을 때에도 제 2종 오류 (Type II error) 수준이 상대적으로 작거나 만족할만한 수준의 검정력을 보여주었다. 이에 반해 다른 두 방법들은 표본이 작은 경우 또는 명세화 오류가 있는 경우 상당히 높은 수준의 제 2종 오류를 나타내었다.

• 핵의학기술
• /
• 제13권3호
• /
• pp.171-174
• /
• 2009

목적 : 2008년도 국내에서의 암 사망원인 1위가 폐암이며, 폐암으로 인한 사망자수는 매년 증가 하고 있다. 이 폐암은 대부분이 진행된 상태로 발견되면 이들 중 80%는 비소세포 성폐암(NSCLC)이다. 종양표지자 검사는 질병의 진행과 관련된 신뢰성 있는 결과를 신속히 의료진에게 제공해야 하는데 $Monototal^{TM}$ 검사는 반응시간이 짧으며, 비소세포성폐암 특히, Squamous cell(편평상피세포)에 대한 예민도가 높은 검사로 알려져 있다. 이에 비소세포성폐암의 진단 및 치료경과 관리를 위한 새로운 종양표지자인 $Monototal^{TM}$의 임상적 유용성에 대해 알아보고자 한다. 실험재료 및 방법 : 2009년 3월에서 4월까지 본원에 의뢰된 비소세포성폐암 환자 검체중 CEA가 양성인 검체 48건과 SCC 양성인 검체 15건, CYFRA 21-1 양성 검체 40건과 음성검체 20건을 대상으로 $Monototal^{TM}$을 측정하여 결과를 비교 하였다. 결과 : 비소세포성폐암 진단받은 환자 검체의 87.5%가 $Monototal^{TM}$ 검사에서 양성을 보였다. SCC 양성인 검체에서는 93.3%양성을 보였다. CYFRA 21-1 양성 검체에서는 100%의 양성을 보였고 음성인 검체에서도 50%의 양성을 보였다. 결론 : 종양표지자는 임상적으로 치료 후 환자의 경과 관찰에 유용하게 사용 되므로 중요하다. 실험 결과 비소세포성폐암에서 $Monototal^{TM}$의 양성률이 높게 보고 되었다. $Monototal^{TM}$의 임상적 가치를 평가 하기 위해서는 좀더 많은 검사가 필요하다고 생각한다. 그러나 CYFRA 21-1 보다 짧은 시간에 결과를 보고 할 수 있고 높은 양성률을 보인 것으로 보아 임상적으로 의의가 있다고 판단된다. 따라서 다른 종양표지자와 병행해서 검사하면 폐암의 진단과 예후 추정에 있어서 임상적으로 유용하다고 생각된다.

• 농업과학연구
• /
• 제37권3호
• /
• pp.457-464
• /
• 2010

The low melting alloy impregnated wood composites with natural grain of thinned Juglans mandshurica was made and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth(Bi) and tin(Sn) which are harmless to humans, was applied for this novel composites, which showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, low abrasion, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $187^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of 30kgf/$cm^2$. The produced composites showed 9 times higher density for small specimen, 6.6 times for actual size sample and great increase in bending strength from 102.05N/$mm^2$ to 189.47N/$mm^2$ for small size sample and to 205.4N/$mm^2$ for actual size sample, also great increase in hardness from 15.1N/$mm^2$ to 73.38N/$mm^2$ for small size sample and 64.87N/$mm^2$ for actual size sample. And the composites demonstrated great decrease in abrasion depth and in water absorption.

• 한국산림과학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1963

1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

• 응용통계연구
• /
• 제10권2호
• /
• pp.339-352
• /
• 1997

소표본으로부터 형성되는 2원 분할표에는 빈도가 작은 칸들이 적지 않기 때문에 대표본이론에 근거한 카이제곱 검증 등 기존 통계적 방법의 적용이 적절하지 않응 수가 있다. 이런 경우에 한 대안으로서 정확검증법(exact tests)이 개발되어 있으나 이것이 너무 많은 계산을 요구하므로 사용하기가 쉽지 않다. 본 연구는 소표본 2원 분할표에서, 단순한 몬테칼로 알로리즘에 의한 행 균일성 가설의 카이제곱 임의화 검증법(randomization test)을 제안하고 튜키(Tukey) 형의 행간 다중비교법을 제안한다. 아울러 열 범주가 순서형인 2원 분할표에 대하여도 유사한 방법론을 적용할 수 있음을 밝힌다.

• 품질경영학회지
• /
• 제22권2호
• /
• pp.89-97
• /
• 1994

We consider the linear calibration model: $y_1={\alpha}+{\beta}x_i+{\sigma}{\varepsilon}_i$, i = 1, ${\cdots}$, n, $y={\alpha}+{\beta}x+{\sigma}{\varepsilon}$ where ($y_1$, ${\cdots}$, $y_n$, y) stands for an observation vector, {$x_i$} fixed design vector, (${\alpha}$, ${\beta}$) vector of regression parameters, x unknown true value of interest and {${\varepsilon}_i$}, ${\varepsilon}$ are mutually uncorrelated measurement errors with zero mean and unit variance but otherwise unknown distributions. On the basis of simple small-sample low-noise approximation, we introduce a new method of comparing the mean squared errors of the various competing estimators of the true value x for finite sample size n. Then we show that a class of estimators including the classical and the inverse estimators are consistent and first-order efficient within the class of all regular consistent estimators irrespective of type of measurement errors.

• Journal of the Korean Data and Information Science Society
• /
• 제11권1호
• /
• pp.111-126
• /
• 2000

지방자치제 실시에 따라 우리나라에서도 전국 또는 도 단위의 통계뿐만 아니라 시 군 구 등의 소지역 통계에 대한 수요가 증대되고 있다. 하지만 정부통계 생산을 위해 실시되는 표본조사의 경우 시(특별시, 광역시) 및 도별 통계생산을 목적으로 하기 때문에 신뢰성 있는 소지역 통계를 산출하는 것이 불가능하고, 따라서 이런 소지역 통계생산을 위해 간접 추정 기법을 적극적으로 활용하는 것이 필요하다. 본 논문에서는 정부통계 생산을 위한 소지역 통계 기법의 도입 및 활용 가능성을 검토해 보기 위해 인천광역시 숙박 및 음식점업의 총매출에 대한 구별 소지역 통계를 산출할 수 있는 여러 가지 간접 추정 방법을 제시하고, 아울러 도소매업 총조사 자료를 이용하여 제시된 간접추정량들의 효율성을 비교 분석해 보고자 한다.