• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.43-51
• /
• 2015

At present, in the case of small and medium window manufacturers in South Korea, glazing and window frame manufacturers are divided into separate businesses. However, in the fenestration energy consumption efficiency rating system and the energy-saving design criteria for buildings, the coefficient of overall heat transmission standard for windows is defined by window sets, which integrate glazing and window frames. At most construction sites, windows are constructed by installing separately supplied glass and frames. Research that can integrate the reality and the system is therefore necessary. The present study first investigated and analyzed the on-site situation of the fenestration energy consumption efficiency rating system. According to the results, while overall understanding of the fenestration energy consumption efficiency rating system was high, satisfaction with it was low, and the general practice at construction sites was to use windows assembled on site rather than integrated window systems manufactured at factories, thus making it difficult to confirm that the current rating system was well applied on site. Consequently, the reality of industrial sites must be reviewed and a realistic alternative to the fenestration energy consumption efficiency rating system must be presented instead of focusing on theory.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.371-378
• /
• 2016

In this study, a small portable sorting pilot for separation that can be used in dismantling construction site, which is the stage of construction waste generation, was developed, and its separation efficiency was evaluated to increase the actual recycling rate of the construction waste. The pilot was developed as portable sorting pilot for separation of 6 ton capacity that can handle one arm roll box within a $15m^2$ area in consideration of narrow places in the downtown area where a number of dismantling sites are located and various processes performed in the dismantling sites. In order to evaluate the efficiency performance of the developed device, the separation and sorting were carried out ten times with respect to trommel rotational speed RPM 2-3, 4-6 and 7-8. According to the results, the highest efficiency of about 90% was shown at RPM 6-7.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.419-425
• /
• 2001

A method to detect lots of porno documents on the internet is presented in this parer. The proposed method applies fuzzy inference mechanism to the conventional information retrieval techniques. First, several example sites on porno arc provided by users and then candidate words representing for porno documents are extracted from theme documents. In this process, lexical analysis and stemming are performed. Then, several values such as tole term frequency(TF), the document frequency(DF), and the Heuristic Information(HI) Is computed for each candidate word. Finally, fuzzy inference is performed with the above three values to weight candidate words. The weights of candidate words arc used to determine whether a liven site is sexual or not. From experiments on small test collection, the proposed method was shown useful to detect the sexual sites automatically.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.31-37
• /
• 2012

Recently buildings are constructed in larger and higher scales and becoming more complex. However from small to large scale buildings and on construction sites there still are fire safety accidents that occur continuously. Therefore to improve fire safety plan, examining the actual fire safety management and understanding fire risk analysis Using Fire Modeling through Computer Simulation. On this study, the permissible evacuation times were estimated for smoke fall, temperature, CO concentration, viability, etc. Fire safety management plans for fire safety were suggested.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.62-64
• /
• 2010

Since 1990 in South Korea, the considerable concern for the safety of construction sights has been increased due to serious accidents. There have been numerous big improvements in preventing the accidents by strengthening legal enforcement and by continuing to emphasize the safety management. Further, the safety standards and criteria for temporary constructional work have been enacted and established in order to maintain safe work environments in temporary construction and structure settings. However, the death rate from fall accidents is still high in the temporary constructional and structural settings in comparison to other work places in construction. According to the analysis of accidents in the field of construction between 2000 and 2007, the death rate from fall accidents in the temporary constructional settings was highest. In addition, there have been more fall accidents in the work setting by small or medium construction enterprises rather than large enterprises due to the relative lack of the safety management. Thus, in this study, the analysis of the causes of fall accidents in the temporary constructional and structural settings between 2000 and 2007 was conducted. Moreover, a survey study was carried out in order to investigate further causes based on the analysis. Finally, this study was also conducted in order to provide basic information and knowledge about the prevention of future accidents.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.81-90
• /
• 2018

Indoor construction site such as building demolition sites, tunnel, vinyl house, and cattle shed are subject to various risk factors such as falling stones, soot and bad odors. However, most of the mini excavators have no cabin that can protect the driver from such risk factors. Therefore, researches on remote control technology of construction equipment are actively conducted as a method for protecting the driver from the risk factors occurring in the working environment. For effective remote control, it is necessary to be able to control the travelling and work using a portable small transmitter. However, due to the limitation of the size of the transmitter, complex operation control is required to control two or more actuators with a single joystick. Also, it is essential to check how remote control characteristics change in various environments such as distance, signal strength, obstacle. Therefore, in this study, an algorithm that can control two actuators simultaneously with a single joystick signal was developed, and a communication method suitable for indoor and outdoor mini construction equipment by analyzing experimentally how the remote control characteristics vary according to various work environments and telecommunication methods proposed.

• Journal of Environmental Impact Assessment
• /
• v.16 no.3
• /
• pp.195-206
• /
• 2007

The purpose of this research is to seek solutions in reducing shadow effects of construction projects on neighboring areas and as its result, we have yielded methods as below to mitigate shadow effects. To eliminate shadow effects fundamentally, revising building layouts to eliminate shadow effects by obtain construction site as much as two point two times of its height. But it will cause multiple problems such as economic inefficiency due to lack of construction sites as well as small sites that are often located in zones that are mixed with highly dense commercial and residential areas along with plan more parks on northern part of the construction site. Therefore, it is recommended to proceed Environmental affect evaluation for shadow effects and gain its residents permission prior to construction or revising building layout. In the other hand, the sunlight collector, which is one of the newly developed recycled energy, has been proven to improve illumination expected to become a reliable solution when dealing with shadow issue in and around high density residential areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.240-246
• /
• 2019

The noise generated by construction machinery operating at construction sites is a major cause of environmental disputes with nearby residents. To reduce construction site noise, low noise construction machinery and low noise methods are recommended to be used first. In addition, the possible noise should be predicted and preventive measures suitable for the noise source should be taken. This study analyzed the sound power level of an excavator, which is used most frequently at construction sites. The sound power level of 297 excavators sold in Korea after 2008 were analyzed and the sound power level was classified according to the type, output (kW), and production site of the excavator engine based on the measured data. As a result, the sound power level decreased by 1 dBA depending on the change in engine type and the sound power level increased by approximately 3 dB (A) when the engine output was doubled. In addition, the sound power level was low in small-sized products of less than 55 kW for overseas products and medium and small-sized products of 55 to 104 kW for domestic products.

• International Journal of High-Rise Buildings
• /
• v.11 no.2
• /
• pp.75-86
• /
• 2022

High-rise buildings often can accommodate the population of small horizontal cities. The investment in high-rise buildings is considerable and therefore a rapid return on investment is necessary. The immediate availability of high-rise buildings can be achieved by automated prefabrication of highly finished modules and their instant on-site assembly by robotic and automated construction sites. A high-rise building as a vertical city can be considered as a sophisticated organism that can constantly change throughout its lifecycle in response to economic growth, demographic change, and environmental pressures. To date, many new urban high-rise developments claim to be "vertical cities", yet few represent this important characteristic. This article analyzed the technological readiness and innovations in the field of construction automation and robotics including single-task construction robots, automated on-site construction factories, and ambient assisted living. These technological advances enable the realization of future vertical cities that are able to continuously grow and transform in terms of form and function. Finally, the article proposes a visionary archetype of vertical city in the name of "dynamic vertical urbanism" that is easy to expand vertically and horizontally in order to achieve instant availability and full life cycle resilience thanks to advanced building technologies.

• Land and Housing Review
• /
• v.11 no.2
• /
• pp.75-86
• /
• 2020

As the urban regeneration project and the old housing maintenance project are actively progressing in Korea, small-scale building construction is being carried out in downtown areas. Small buildings in the downtown area are constructed on about 4 to 10 floors, and since they are carried out in small units in residential areas, it is difficult to enter large equipment to construct existing piles, and it is more vulnerable to complaints about noise and vibration. in this study, helical piles suitable for urban areas or small sites where it is difficult to enter large equipment, such as noise and vibration. Reliability analysis was performed on the results of the static load tests and dynamic load tests conducted at the LH site and the bearing capacity calculated by the hydrostatic method and the empirical formula (N value). As a result of comparing and analyzing the design formula and the results of static load test and dynamic load tests, the correlation between the design formula of the bored pile (Road bridge design standard) formula using N value and the design formula by the modified Davisson method frequently used by method commonly European helical file practitioners.