• 대한산업공학회지
• /
• 제25권1호
• /
• pp.67-74
• /
• 1999

Market share is one of the most important measures in the valuation of prospering firm. It plays a role of composite indicator for the competitiveness of firm. So, the understanding of the underlying process of market share is inevitable factor for the econometricians and the business engager. Lately, the Korean Economy has been placed in the control of IMF. This shock will cause a lot of influence over the domestic economy. The idea that the information about the past shock-response experience will do us good for dealing with this kind of economic shocks is not new. Among numerous markets, we pay attention to the durable goods market, especially automobile market. The automobile market has large repercussion effect over the domestic economy on the issue of both national employment and technology integration. We divided the Korean automobile market into three segments: small, medium, and large-sized car, while each proportion of these segments has been changing slowly. We propose a Bayesian approach to detect and forecast structural changes in time series of the market shares in the domestic automobile market, especially for level shifts and drift changes, and compare the empirical results with other existing approaches.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.544-548
• /
• 2007

In general, final width of hot strip should be accomplished in this stage because width reduction of strip hardly appears during typical finishing mill. However, it is difficult to control the width of strip in the roughing mill process as the horizontal rolling of strip is subsequently performed after the vertical rolling. It is therefore important to obtain the deformation rolling direction on strip width to minimize the width spread of strip during horizontal rolling after vertical rolling. Generally there is Sizing press type and Edger-roll type. The width reduction process in sizing press has small amount of width spread compared with the edger. However, productivity by the sizing press process is much lower than those of the edger. In this study, sizing press and Edger-roll process parameters in a sheet rolling mill were set at specified values and the effect of the change in these parameters on product quality and process performance were evaluated.

• Neonatal Medicine
• /
• 제16권1호
• /
• pp.76-80
• /
• 2009

저자들은 자궁 내 발육 지연으로 입원한 신새아가 요도하열, 잠복고환, 폐동맥판 협착이 동반되어 시행한 염색체 검사에서 불균형 전도로부터 재조합된 염색체이상의 결과로 8번 염색체 단완 결실과 장완 중복을 보인 1례를 경험하였기에 문헌 고찰과 함께 보고하는 바이다.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.764-771
• /
• 2006

Knowledge of ground thermal properties is most important for the proper design of large BHE(borehole heat exchanger) systems. Thermal response tests with mobile measurement devices were first introduced in Sweden and USA in 1995. Thermal response tests have so far been used primarily for in insitu determination of design data for BHE systems, but also for evaluation of grout material, heat exchanger types and ground water effects. The main purpose has been to determine insitu values of effective ground thermal conductivity, including the effect of ground-water flow and natural convection in the boreholes. Test rig is set up on a small trailer, and contains a circulation pump, a heater, temperature sensors and a data logger for recording the temperature data. A constant heat power is injected into the borehole through the pipe system of test rig and the resulting temperature change in the borehole is recorded. The recorded temperature data are analysed with a line-source model, which gives the effective insitu values of rock thermal conductivity and borehole thermal resistance.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.46-55
• /
• 2016

The microcrystalline cellulose (MCC) was prepared from oil palm biomass, empty fruit bunch (EFB) for increasing the usability of EFB. The morphological, physical and chemical properties of MCC made from EFB were evaluated by comparing with those of the commercial MCC obtained from AVICEL. The EFB-MCC had the wider distribution in particle size and there were many small particles around $10{\mu}m$. There were no significant differences in the cellulose crytallinity and the chemical composition between EFB-MCC and AVICEL-MCC. The properties of tablet samples made by the common direct compression process were evaluated depending on the types of MCC and the compression pressure during tablet making process. The tablet made of EFB MCC showed the higher compressed structure, which resulted in the less disintegration by the water soaking treatment than those made of Avicel-MCC. The results of this study showed that the EFB-MCC could be utilized as one of the commercial MCC.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.213-219
• /
• 2005

액체로켓엔진의 성능 및 냉각특성 연구를 위한 칼로리미터를 적용한 소형연소기가 개발되어 시험이 수행되었으며 10개의 칼로리미터 채널에서 가스 측면 벽면을 따른 열전달계수를 예측하기 위해서 냉각 성능 해석이 수행되었다. 칼로리미터로 공급되는 유량에 대한 가스 측면의 열전달 특성과 냉각성능을 정량적으로 분석하고자 하였으며 연소시험 및 열전달 해석을 통해 열전달 경험식을 도출하였다.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.769-782
• /
• 2020

A Prestressed stayed steel column is an efficient and lightweight way with regard to enhancing the stability behaviour of a compression column. In the past, researchers primarily concentrated on investigating the behaviour of stayed steel columns with horizontal crossarms. However, this article focuses on prestressed stayed steel columns with split-up crossarm system, in which the crossarms are aslant and rotational symmetrically arranged. A mathematical formula calculating the optimal pretension that corresponds to the maximum critical buckling load was established according to geometric analysis based on the small deformation assumption. It was demonstrated that critical buckling mode of this stayed column is different from the one with horizontal crossarms. The governing imperfection direction that should be adopted in the nonlinear buckling analysis was determined in this work. In addition, the effects of crossarm inclination, stay diameter, and crossarm length on the stability behaviour were investigated. An influencing factor denotes the ratio of the load carrying capacity of the prestressed stayed steel column to the Euler load of the main column was also obtained.

• 산경연구논집
• /
• 제7권3호
• /
• pp.5-12
• /
• 2016

Purpose - In this paper, we consider more segmented types of markets than conventional version of ones in South Korea and explore the degree of relations between these markets and the related factors with them. In this case, ten attributes of types of markets mentioned above will be considered. To be more specific, the numerical strength is evaluated and graphical approach is expressed on two-dimensional plane, if the association exists between the considered variables. Research design, data, and methodology - This work is done by the 2013 report on the commercial building lease offered by Small Businessmen Promotion Institute (May/2013~August/2013) and exploited by statistical analyses such as correspondence analysis and a chi-squared test in IBM SPSS 23.0. Results - Findings of this paper indicate that a variable Korean market, including traditional markets, are closely connected with variables administrative district, sales and occupation instead of company, age group and business duration and the detailed associations between variables can be obtained by inspecting results of correspondence analysis. Conclusions - We can understand where the status of the Korean markets stands now through this work and also government authority and local autonomy can take advantage of these findings to enhance the revitalization of Korean markets and other markets.

• 폴리머
• /
• 제38권4호
• /
• pp.477-483
• /
• 2014

Poly(lactic acid) (PLA) and poly(${\varepsilon}$-caprolactone) (PCL) blends with various components for melt-blown non-wovens were prepared by a twin-screw extruder. Tributyl citrate (TBC) was added in order to improve the miscibility between PLA and PCL. The results showed that small circular particles of PCL were dispersed in PLA matrix uniformly. The addition of PCL had the heterogeneous nucleation effect on the crystallization of PLA and decreased thermal stability of PLA. The flow of pure PLA and blends approached to Newtonian liquid at a low shear rate and expressed more obvious viscoelasticity at a high shear rate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.11-19
• /
• 2007

This paper presents two novel compensation circuits for leakage current and power supply noise (PSN) in phase locked loop (PLL) using a nanometer CMOS technology. The leakage compensation circuit reduces the leakage current of the charge pump circuit which becomes more serious problem due to the thin gate oxide and small threshold voltage in nanometer CMOS technology and the PSN compensation circuit decreases the effect of power supply variation on the output frequency of VCO. The PLL design is based on a 32nm predictive CMOS technology and uses a 0.9V power supply voltage. The simulation results show that the proposed PLL achieves a 88% jitter reduction at 440MHz output frequency compared to the PLL without leakage compensator and its output frequency drift is little to 20% power supply voltage variations. The PLL has an output frequency range of $40M{\sim}725MHz$ with a multiplication range of 11023, and the RMS and peak-to-peak jitter are 5ps and 42.7ps, respectively.