• 제목/요약/키워드: small Go board

검색결과 6건 처리시간 0.022초

몬테카를로 트리탐색을 활용한 초소형 바둑에서의 최상의 수순과 덤의 크기 (The Best Sequence of Moves and the Size of Komi on a Very Small Go Board, using Monte-Carlo Tree Search)

  • 이병두
    • 한국게임학회 논문지
    • /
    • 제18권5호
    • /
    • pp.77-82
    • /
    • 2018
  • 바둑은 최상의 착점을 찾기 위해 컴퓨터가 완전탐색을 하여 모든 가능한 착점들을 탐색할 수 없는 가장 복잡한 보드게임이다. AlphaGo 이전에 모든 강력한 컴퓨터바둑 프로그램들은 게임트리 내 매우 큰 분기수와 국면평가에서의 어려움을 극복하기 위해 몬테카를로 트리탐색(Monte-Carlo Tree Search)을 사용해 왔다. 본 논문에서는 MCTS를 활용하여 초소형 바둑에서의 최상의 수순과 덤의 크기를 알고자 했다. 2줄바둑에서의 게임결과는 빅이 되었으며 덤의 크기는 0집, 반면에 3줄바둑에서는 흑이 항상 승리하고 덤의 크기는 9집이 되어야 함을 알아냈다.

순수 몬테카를로 트리탐색을 기반으로 한 소형 바둑판에서의 가장 유망한 첫 수들 (The most promising first moves on small Go boards, based on pure Monte-Carlo Tree Search)

  • 이병두
    • 한국게임학회 논문지
    • /
    • 제18권6호
    • /
    • pp.59-68
    • /
    • 2018
  • 간단한 규칙에도 불구하고 바둑은 인공지능 분야에서 가장 복잡한 전략적 보드게임 중의 하나이다. 몬테카를로 트리탐색(MCTS)은 최상우선 트리탐색 알고리즘으로 컴퓨터바둑 제작을 위해 사용되어 왔다. 저자는 9줄바둑판보다 작은 바둑판에서의 바둑게임 행위를 위해 MCTS를 활용하여 가장 유망한 첫 수를 찾고자 한다. 실험결과에 의하면 MCTS는 첫 수로 홀수형 바둑판에서는 정중앙, 짝수형 바둑판에서는 중앙 부근에 착수하기를 선호하는 것으로 나타났다.

C5210-H(HP)와 NKT322-EH 소재의 협피치 커텍터에서 단조 가공에 의한 소재 폭 변화에 관한 연구 (A study on the change of material width by forging processing in fine pitch connector of C5210-H(HP) and NKT322-EH materials)

  • 신미경;이춘규
    • Design & Manufacturing
    • /
    • 제14권3호
    • /
    • pp.17-22
    • /
    • 2020
  • As devices such as smartphones, tablet PC, and wearable devices have been miniaturized, the connectors that go into the devices are also designed to be very small. The connector combines the plug and the receptacle to transfer electricity. As devices are miniaturized, the contact shape is formed by partially thinning the thickness of the raw material of the terminal in order to lower the coupling height of the plug and receptacle. The product used in this study is a receptacle terminal used for 0.4mm pitch board to board connector among fine pitch connectors. When the material thickness is reduced by forging the receptacle terminal, the width change of the pin is checked. To reduce the thickness of the material by forging, pre-notching is applied in the first step, forging in the second step, and notching in the third step. After forming the width dimension of the pin to 0.28 mm in the pre-notching process, in the forging process, the material thickness 0.08 mm and 0.02 mm (25%) were forged and the thickness was changed to 0.06 mm and the width change amount of the pin was measured. The facility produced 10,000 pieces at 400 SPM using a Yamada Dobby (MXM-40L) press, and thirty pins were measured and the average value was shown. After forging by using C5210-H (HP) and NKT322-EH, which are frequently used in connectors, analyze the amount of change in each material. The effect of punching oil on forging is investigated by appling FM-200M, which is highly viscous, and FL-212, fast drying oil. This study aims to minimize mold modification by predicting the amount of material change after forging.

A Light-Weight Spring-Driven and Hydraulically-Damped Multiple Piston Corer

  • Lee, Tae-Hee;Go, Sung-Jun;Huh, Sung-Hoi;Lee, Tong-Sup
    • Journal of the korean society of oceanography
    • /
    • 제34권3호
    • /
    • pp.179-183
    • /
    • 1999
  • A light-weight multiple piston corer to meet increasing coring needs in areas where R/V access is limited, is designed and discussed. Hydraulically-damped and spring-driven piston system not only virtually undisturbed surface sediments but also facilitate the recovery and subsequent operation including pore water extraction and core slicing on board the ship. It is designed as compact, light-weight and easy to dissemble that whole gear can be carried by small passenger vehicle yet it permits thick-walled core tube for thermal insulation or large opening core tubes. Because single spring instead of heavy weights of conventional gravity-driven multiple corers is used, this device is very simple and cheap to construct.

  • PDF

영상을 이용한 미세 드릴비트 측정에 관한 연구 (A Study on Micro Drill-Bit Measurement Using Images)

  • 곽동규;최한고
    • 융합신호처리학회논문지
    • /
    • 제16권3호
    • /
    • pp.90-95
    • /
    • 2015
  • 본 연구에서는 인쇄회로 기판(PCB)의 홀 가공에 사용되는 초소형 및 경량의 마이크로 드릴비트를 검사하기 위한 방법을 제안하고 있다. 고배율의 현미경을 통해 마이크로 드릴 비트의 영상을 획득한 후 드릴비트의 주요 지점들을 검출하는 영상처리 알고리즘을 개발하였고 주요지점을 근거로 하여 드릴비트의 다양한 요소들을 측정하였다. 또한, 드릴비트의 정상 및 비정상 상태를 자동으로 분별할 수 있는 윈도우 기반 검사 시스템을 개발하였다. 본 연구에서 개발한 시스템의 상대적인 성능비교를 위해 시험영상들을 사용하여 기존 검사장비와 비교하였다. 실험결과에 의하면 제안된 시스템은 기존 검사기보다 성능을 조금 향상시켰으며 기존 시스템에서 발생된 오판단된 일부 에러를 정확하게 분류하였다.

중국 차이넥스트 시장의 벤처캐피탈이 IPO 첫날 수익률에 미치는 영향 (Effect of Venture Capitalists on the ChiNext IPO First-Day Return in China)

  • 강개;조셉;강호정
    • 경영과정보연구
    • /
    • 제36권4호
    • /
    • pp.117-127
    • /
    • 2017
  • 본 연구는 성장 가능성이 높고 첨단기술을 보유한 기업의 원활한 자금조달 기회를 제공하기 위해 중국 심천증권거래소에서 2009년 10월에 설립한 시장인 차이넥스트(ChiNext) 시장을 대상으로 2012년 1월부터 2015년 1월까지 벤처캐피탈이 기업의 IPO 첫날 수익률에 미치는 영향을 분석하였다. 본 연구는 136개 표본기업을 대상으로 하여 T-검증과 다중회귀분석을 실시하였으며 본 연구결과는 다음과 같다. 첫째, 벤처캐피탈 투자를 받지 않은 기업이 벤처캐피탈의 투자를 받은 기업보다 상장 첫날의 수익률이 더 높은 것으로 나타나 벤처캐피탈 투자를 받은 기업의 경우 벤처캐피탈이 보증역할을 하여 정보 비대칭을 줄여주기 때문인 것으로 사료된다. 둘째, 국외벤처캐피탈이 투자한 기업이 국내 벤처캐피탈이 투자한 기업보다 상장 첫날의 수익률이 더 높은 것으로 나타나 국외벤처캐피탈이 국내벤처캐피탈과 비교하여 상대적으로 기업과 투자자간의 정보비대칭이 크기 때문인 것으로 생각된다. 셋째, 단독 투자한 기업이 공동 투자한 기업보다 상장 첫날의 수익률이 더 높은 것으로 나타나 벤처캐피탈 공통투자를 받은 기업은 벤처캐피탈 단독투자를 받는 기업보다 투자자 입장에서 위험이 줄어들기 때문인 것으로 사료된다. 넷째, IPO 첫날 수익률을 종속변수로 하여 실시한 다중회귀분석 결과는 벤처캐피탈 투자기업 여부(VCAP), 벤처캐피탈의 수(VCNum), 공모규모(Lnsize)와 주가수익비율(PER)은 IPO 첫날의 수익률에 통계적으로 유의적인 부(-)의 영향을 미치는 것으로 나타났다. 벤처캐피탈의 유형(VCType), 거래량회전률(Turn over) 및 첨단기술기업 여부(Tech-firms)는 IPO 첫날 수익률에 통계적으로 유의적인 정(+)의 영향을 미치는 것으로 나타났다. 본 연구는 중국 심천증권거래소의 차이넥스트 시장의 IPO의 첫날수익률 정도 및 특성에 대한 이해를 제고시킴으로써 투자자에게 유용한 정보를 제공해준다는 점에서 본 연구의 의의가 있다.

  • PDF