• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.57-64
• /
• 1989

This study presents a reliability-based optimum design of reinforced concrete frames, in which the AFOSM and SOSM methods are applied for the evaluation of the failure probabilities, and the sequential linear programming method is used as a practical approach to the system optimization. One-story two-bay reinforced concrete frame is chosen for the numerical illustration of the proposed reliability-based optimum design. As a result, it is found that the proposed procedure for the reliability-based optimization of RC frames could provide the accurate estimation of the optimal level of safety, and appears applicable to real structures with reasonable complexity. It is shown in the paper that the probability distributions of the basic random variables and the uncertainties of the applied loadings and material strengths may have great effect on the optimum design, but the AFOSM and SOSM methods do not show significant discrepancy in the optimum design results, but the former appears more realistic and time saving than the latter for this specific study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.470-475
• /
• 1999

This study was conducted to evaluate the utilization of animal by-product mixture (ABPM) as a dietary animal protein source of fish meal replacer, and to determine the effect of dietary chromic oxide in growing rainbow trout, Oncorhynchus mykiss. ABPM is a mixture of five anmial by-products such as meat and bone meal (MBM) feather meal (FM), squid live, powder(SLP), poultry by-product (PBP) and blood- meal (BM) at a specific weight based ratio. Diet 1 and 2 were formulated on a isonitrogenous and a isocaloric basis of $46.5\%$ crude protein and 16.7 KJ/g diet; diet 1 (WFM 100), $100\%$ of the animal protein source came from white fish meal; diet 2 (ABPM 40), $60\%$ WFM+$40\%$ ABPM as the animal protein source; diet 3 (-Cr) commercial diet without chromic oxide; diet 4 (+Cr), commercial diet with chromic oxide. After eight weeks of feeding trials, fish fed diet 2 had a significantly lower body weight gain (WG) and feed efficiency (FE) than that of fish fed the other diets (P<0.05). When comparing diet 3 with diet 4, no significant differences were found in WG and FE (P>0.05). There were no significant differences on condition factor, hematocrit level, serum phosphorus, bone phosphorus, whole body phosphorus, and bone ash among fish from all four diet groups. Fish fed diet 4 had a significantly higher whole body lipid than that of fish fed the other diets (P<0.05), These results indicated that ABPM could be used less than $40\%$ in growing rainbow trout with a sufficient period of acclimation, In addition, the $0.5\%$ of chromic oxide can be used to determine the apparent digestibility of the nutrients in the feed without any adverse effects on growth and body composition.

• Journal of Acupuncture Research
• /
• v.20 no.5
• /
• pp.50-62
• /
• 2003

Objective: Bee Venom(BV) has been used for various kinds of inflammatory or painful conditions in Oriental Medicine clinics, and there publishes reports on its therapeutic effects and the probable mechanism of those therapeutic effects, where CDs and cytokines plays important role. This study investigated the influences of bee venom on the expressions of CDs and cytokines of HMC cell line Methods: In this study we analysed the expression profile of HMC cell line treated with BV of 10-2ug/ml in relation to that of HMC cell line treated with vehicle by way of CD/cytokine microarray hybridization with 342 genes on it. Results: There were no upregulated genes by more than 3 fold, while there showed some downregulated genes by less than 1/3 fold as follows: colony stimulating factor 2, CD122, IL-7, CD112, TNF-alpha, CD138, CD166, TGFbetaR2, CD42b, CD62L, CD111, interleukin 10 receptor alpha, colony stimulating factor 1(macrophage), CD38 antigen(p45), CD121a, CD33 antigen(gp67), colony stimulating factor 1 receptor, B cell linker protein (SLP65) mRNA, CD94, alanyl(membrane) aminopeptidase, immunoglobulin(CD79A) binding protein 1, CD205, CD241, CD207, CDw121b, integrin alpha L(CD11a), integrin beta 1(CD29), CD91, CD42b. Conclusions: Bee venom treatment induced downregulation of some CDs or cytokines including $TNF-{\alpha}$. IL-1R with its possible implication in an antiinflammatory action of BV. Further research on expression profile changes induced by BV treatment is expected.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.508-512
• /
• 2014

This paper suggests the control system and algorithm for auto and manual control of the streetlight using RF system. There are two control system in this auto control algorithm. One is group control, the other individual control. In case of group control, if a car is detected by the object detecting sensor of the system installed on the streetlight, it will turn on the light per group by transmitting the RF signal. The streetlight turns on separately when it detects people or a car parked on the shoulder in accordance with the individual control. Also, there is manual control algorithm that manager can check surrounding environment and condition of the streetlight by RF signal and various sensors. So, not only the proposed system reduce meaningless energy consumption, but also it offers convenience regarding maintenance and control of the streetlight.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.101-108
• /
• 2004

A FEM-based efficient method is developed for the shape optimization of 2-D structures. The combined SLP and Simplex method are coupled with finite element analysis. Selected set of master nodes on the design boundaries are employed as design variables and assigned to move towards their normal directions. The other nodes along the design boundaries are grouped into the master node. By interpolating the repositioned master nodes, the B-spline curves are formed so that the rest mid-nodes efficiently settle down on the B-spline curves. Mesh smoothing scheme is also applied for the nodes on the design boundary to maintain most finite elements in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• Atmosphere
• /
• v.24 no.2
• /
• pp.131-140
• /
• 2014

The "Barents Oscillation (BO)", first designated by Paul Skeie (2000), is an anomalous recurring atmospheric circulation pattern of high relevance for the climate of the Nordic Seas and Siberia, which is defined as the second Emperical Orthogonal Function (EOF) of monthly winter sea level pressure (SLP) anomalies, where the leading EOF is the Arctic Oscillation (AO). BO, however, did not attracted much interest. In recent two decades, variability of BO tends to increase. In this study, we analyzed the spatio-temporal structures of Atmospheric internal modes such as Arctic Oscillation (AO) and Barents Oscillation (BO) and examined how these are related with Arctic warming in recent decade. We identified various aspects of BO, not dealt in Skeie (2000), such as upper-level circulation and surface characteristics for extended period including recent decade and examined link with other surface variables such as sea-ice and sea surface temperature. From the results, it was shown that the BO showed more regionally confined spatial pattern compared to AO and has intensified during recent decade. The regional dipolelar structure centered at Barents sea and Siberia was revealed in both sea-level pressure and 500 hPa geopotential height. Also, BO showed a stronger link (correlation) with sea-ice and sea surface temperature especially over Barents-Kara seas suggesting it is playing an important role for recent Arctic amplification. BO also showed high correlation with Ural Blocking Index (UBI), which measures seasonal activity of Ural blocking. Since Ural blocking is known as a major component of Eurasian winter monsoon and can be linked to extreme weathers, we suggest deeper understanding of BO can provide a missing link between recent Arctic amplification and increase in extreme weathers in midlatitude in recent decades.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.27-35
• /
• 2003

Geometric modeling tool and analysis tool of shell surface have been developed in the different environments and purposes. Thus they cannot be naturally fitted to each other for the integrated design and analysis. In the present study, an integrated framework of geometric modeling, analysis， and design optimization is proposed. It is based on the common representation of B-spline surface patch. In the analysis module, a geometrically-exact shell finite element is implemented. In shape optimization module, control points of the surface are selected as design variables. For the computation of shape sensitivities, semi-analytical method is used. Sequential linear programming(SLP) is adopted for the shape optimization of surfaces. The developed integrated framework should serve as a powerful tool for the geometric modeling, analysis, and shape design of surfaces.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.1-12
• /
• 1985

This study is conserned for the optimum design of reinforced concrete slab-beam-column structures with multi-storys and multi-bays by Direct Method. Flexural and shear strength, sectional size, and steel ratio etc., were considered as the design-constraints and the cost function was taken as to objective function. They became high degree nonlinear problems. Using SLP as an analytical method of nonlinear optimal problems, an optimal algorithm was developed in this study and the algorithm was applied to the optimization of reinforced concrete structure system of 5 storys. The result converged to a optimal solution with 3 to 5 iterations, and proved that economical design could be possible when compared with conventional designs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.10-27
• /
• 2005

In this paper, we propose a high level design architecture of WCDMA(UMTS) base station modem and synchronization algorithms applied to the proposed architecture. Also analysis of each synchronization algorithm and performance evaluation of fixed point designed modem are shown. Since the target system is base station modem, each synchronization algorithm is designed for its stable operation. To minimize implementation complexity, optimum fixed point design for best operation of synchronization algorithms is performed. We performed symbol level link simulation with fixed point designed modem simulator for data rate of 12.2kbps, 64kbps, 144kbps, and 384kbps. We compared performance results to the minimum requirements specified in 3GPP TS 25.104(Release 5). Extensive computer simulation shows that the proposed modem architecture has stable operation and outperform the minimum requirement by 2 dB. The proposed modem architecture has been applied in the implementation of WCDMA reverse link receiver modem chip successfully.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1998

Due to the increase in capacity of auxiliary machinery in power plant, the importance of energy saving has been greatly emphasized. If the speed of fans or pumps is controlled in accordance with the variation of load, large electric energy can be saved. Large capacity inverter, 2MVA GTO inverter, has been developed by operating two of 1MVA unit inverters in parallel. The parallel operation of the unit inverter is accomplished through two output transformers of which the secondary windings are connected in series. The system is composed of one control cubicle, one rectifier cubicle and 2 unit inverter cubicles. This inverter system was applied to the sea water lift pump(SLP) driven by a 6.6KV 1500KW induction motor in Seo-Inchon power plant to save the electric energy. The parallel operation of inverters by 180 degrees apart in switching frequency helps to reduce the harmonic components.