• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.481-481
• /
• 2007

The characteristics of slow wave structure employed for backward wave oscillator expected to be a high power microwave source are studied analytically. The slow wave structure is a sinusodially corrugated wall waveguide. The waveguide is designed and transmitted characteristics for microwave are measured in the air. There exist literatures on high efficiency of enhansed radiation from backward wave oscillators involving plasmastudied experimentally another results.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.461-464
• /
• 2009

The characteristics of slow wave structure employed for backward wave oscillators expected to be a high power microwave source are studied analyytically. The slow wave structure is a sinusoidally corrugated wall waveguide. The waveguide is designed and fabricated by cast aluminun. The dispersion relation and transmitted characteristics for microwaves are measured in the air. There exist literatures on high efficiency of enhanced radiation from backward wave oscillators involving plasma studied experimentally.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.391-399
• /
• 1999

We have designed the backward wave oscillator, a power-pulsed generator oscillated at 20 GHz has higher frequency than current one. An absolute instability linear analysis was used for the purpose of designing the slow wave structure. A large diameter (D/$\lambda$=4.8) of the slow wave structure was adopted to prevent the breakdown brought about by the increase of power density. We have fabricated a marx generator, pulse forming line and diode. And the development of a compact pulsed power generator with short period and low amplitude is expected.

• 전자공학회논문지D
• /
• 제35D권11호
• /
• pp.23-30
• /
• 1998

수동 소자를 위한 대표적 구성요소의 하나인 마이크로스트립을 이용하는 소자는 넓은 점유면적으로 인하여 고주파 집적회로의 소형화를 제한하는 중요한 요인이 되고 있다. 본 논문에서는 신호의 진행 방향으로 마이크로스트립 도체를 주기적으로 천공함으로써 slow-wave 효과를 얻는 천공된 마이크로스트립을 제안하고 해석과 실험을 통하여 성능의 우수성을 확인하였다. 천공된 마이크로스트립의 특성 임피던스 정합(50 Ω)과 Q 값 등은 기존의 변조된 폭을 갖는 마이크로스트립보다 향상됨을 관찰하였다. 본 천공된 마이크로스트립은 그 구조의 단순함으로 보다 우수한 Q 값을 얻을 수 있으며 초고주파 소자의 소형화에 매우 효과적으로 이용될 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.145-150
• /
• 2008

본 논문에서는 탐지레이다용 진행파관증폭기 (TWTA: Traveling Wave Tube Amplifier)의 개발을 위한 지연파구조 특성을 제안한다. 지연파구조 특성 및 이론적 해석을 위해 증폭기 설계 및 구현시 HFSS Code와 LMSuite Code를 활용 하였다. 나선형 저속파 진행파관 증폭기의 절단 및 시뮬레이션을 통하여 제안한 측정값이 설계규격을 만족시키는 결과를 얻었다. 본 논문에서 제안만 규격은 매우 유용하며 따라서 차후 유사장비 개발시 적용 가능할 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.317-322
• /
• 2003

In this paper, we design a slow-wave bandpass filter that uses a microstrip line periodically loaded with microstrip ing resonators for WLAN(5 GHz). Unlike conventional slow-wave filters, this filter is designed to produce a narrow passband at the fundamental mode of the resonators and provide lower insertion loss than that of parallel- or cross-coupled ring bandpass filters. A PBG(Photonic Band Gap) structure patterned in the ground plane is used to suppress the spurious transmission and extend out-of-band rejections Experimental result shows that the first spurious response in the stopband of the slow-wave bandpass filter can be rejected using a PBG structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.287-287
• /
• 2009

The characteristics of slow wave structure employed for backward wave oscillators expected to be a high power microwave source are studied analytically and experimentary. The slow wave structure is a sinusoidally corrugated wall waveguide The dispersion relationn and transmitted characteristics for microwaves are measured in the air. There exist literatures on high efficiency of enhanced radiation from backward wave oscillators involving plasma studied experimentally.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.268-271
• /
• 2006

We have studied the backward wave oscillator, a power-pulsed generator oscillator at 20 GHz has higher frequency then current one. An absolute instability linear analysis was used for the purpose of designing the slow wave structure. A large diameter of the slow wave structure was adopted to prevent the breakdown brought about by the increase of power density.

• 대한전자공학회논문지TC
• /
• 제42권3호
• /
• pp.33-38
• /
• 2005

본 논문에서는 표면 마이크로 머시닝 기법으로 구현된 DAML (Dielectric-supported Airbridge Microstrip Line) 형태의 새로운 구조를 이용하여 $180^{\circ}$ 링 하이브리드 결합기를 설계 및 제작 하였다. DAML 구조로 이용하여 제작된 결합기는 60 GHz 중심 주파수에서 3.58 dB의 S31과 3.31 dB의 S21과 61 GHz에서 16.17 dB 이상의 S11과 55 dB 이상의 S41를 얻을 수 있다. 결합기의 크기를 줄이기 위하여 slow wave 구조가 삽입된 결합기를 설계 제작하였으며 크기를 $33\%$ 정도 줄일 수 있는 효과를 얻을 수 있었다.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2041-2046
• /
• 2008

A frequency-dependent slow-wave factor (SWF) and equivalent circuit model of transmission line with defected ground structures (DGS) is described. Once S-parameters of a DGS transmission line are given, the conventional frequency -independent equivalent circuit elements are extracted using 3dB cutoff and resonant frequencies (Fc and Fo) as the first step. Using the initial equivalent elements and simple transmission line theories, a frequency-dependent equivalent transmission line model is established through an analytical method, and finally the frequency dependent SWF is calculated. The proposed equivalent circuit model and SWF are frequency-dependent and more reliable because even small insertion loss within available passband is considered, while they have been independent of frequency.