• 수산해양기술연구
• /
• 제37권1호
• /
• pp.1-8
• /
• 2001

This study deals with the experimental and numerical investigations to design the high performance otter board. Experiment was carried out to determine the most effective slot size of single-slot cambered otter board in the circulation water channel of BAEK KYUNG IND. Co. LTD. Numerical analysis was done by the commercial CFD code, FLUENT, to provide some valuable physical interpretations and finally to design the otter board section by numerical method. The major results are as follows ; 1. In experiment, the maximum lift and drag coefficients of simple cambered type otterboard were 1.41, 0.55, respectively, at the angle of attack $28^\circ$, while those of slot one with slot size 0.02C (C denotes the chord length) were 1.72, 0.42 at the angle of attack $24^\circ$. 2. The hydrodynamic characteristics depending upon slot size shows the greatest at 0.02C of the slot size. 3. Numerical results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of $C_L$ and $C_D$ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.23-28
• /
• 1999

구형도파관 slot 안테나는 그 구조가 간단하고, 고효율, 고신뢰성 및 소형 제작이 가능한 이유로 많은 Radar 분야와 마이크로파 통신 분야에서 그 응용 분야가 확대되고 있다. 도파관 벽에 형성된 slot은 도파관 내부 도체의 전류를 차단하여 전자파를 자유공간으로 복사한다. 그러므로 슬랏의 경사각도, 절삭깊이, 슬랏폭, 슬랏 길이 등이 안테나 특성 변화의 중요한 변수가 된다. 이러한 slot에 대한 이론적 해석의 어려움으로 인하여 주로 실험적으로 측정된 데이터를 이용한 설계와 제작이 이루어져 왔다. 본 논문에서는 slot의 전계 분포로부터 복사되는 복사전력 및 모드 전류 계산에 의해 slot 어드미턴스를 구하고, 공진길이 및 절삭깊이, 경사각도 등을 계산할 수 있는 표를 완성함과 더불어 동일 slot을 유한요소법을 사용하는 상용 소프트웨어(HFSS)를 사용하여 해석하는 방법을 동시에 수행하여 해석 결과를 기존 문헌의 측정 결과와 비교하므로서 적절한 해석 방법을 찾아내고자 한다.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.125-132
• /
• 2004

The radial slot configuration in the solid propellant grain is usually fabricated by the polyurethane foam slot former The foam cannot be easily removed from the solid propellant, some can remain in the slot. Analogue solid propellant rocket motors using polyurethane foam to shape the slot are static fired with the foam former still in place in the slot. The pressure increases at the slot part are measured and there are indications of the propellant cracks at the insulations above the slot. The pressure increase is produced at the beginning of the burning sequence as the foam will hinder the combustion gas of the burning propellant from flowing into the central bore. The pressure increase up to about 300psi is predicted for the motor tested and this pressure increase depends on the gap between the propellant and foam surfaces and remaining foam volume. This amount of pressure increase inside of the slot is estimated to cause the propellant crack. To prevent this pressure increase, minimizing the foam remainder in the slot and making sufficient chamfering at the comer of the slot entrance are suggested.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.949-954
• /
• 2011

This paper presents a comparative study on motor characteristics with specific consideration of radial vibration force in interior permanent magnet synchronous motors (IPMSM) according to pole/slot combinations. Three IPMSM models, 16-pole/15-slot design, 16-pole/18-slot design and 16-pole/24-slot design are built, in which 16-pole/15-slot and 16-pole/18-slot designs provide high winding factor and 16-pole/24-slot design is known as a general pole/slot combination. By coupling finite element analysis (FEA) with equivalent circuit method, motor characteristics, back electro-motive force (Back-EMF), inductances, cogging torque, etc. as well as machine output performances are analyzed and compared. The radial vibration force (RVF) distribution in air gap causing stator vibration and noise is interested. It is expected that this study help with appropriate choice of pole/slot combination in IPMSM design.

• 대한전자공학회논문지TC
• /
• 제39권10호
• /
• pp.21-26
• /
• 2002

본 논문에서는 충분한 대역폭과 이득을 갖는 5.8㎓ 대역의 무선 LAN용 하이브리드 슬롯 안테나를 설계하고 제작하였다. 설계한 안테나는 유도성 급전 슬롯과 용량성 급전슬롯을 결합한 형태이다. 광대역을 얻기 위하여 유도성 급전 슬롯은 5.,3 ㎓에서 설계하였고,용량성 급전 슬롯은 5.8㎓ 에서 설계하였다. 설계시 주요 파라미터는 슬롯 폭과 CPW의 길이이다. 안테나는 Ensemble 6.0을 사용하여 시뮬레이션 하였으며 시뮬레이션 결과와 실제 제작한 안테나의 특성을 비교하였다. 제작된 하이브리드 슬롯 안테나의 공진 주파수는 5.8 ㎓이고, VSWR<1.5를 기준으로 하여 28%의 대역폭과 5 ㏈i의 이득을 얻었다. E-면과 H-면의 빔폭은 각각 60°와 44°이다.

• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.50-55
• /
• 2002

In this paper, Ive propose a bow-tie-shaped meander slot antenna find by a microstrip line to achieve compact size as well as wideband characteristic. While conventional bow-tie slot antennas exhibit wide band characteristic, they have relatively large size. On the other hand, the meander slot antennas are very small, but they reveal quite narrow bandwidth (typically less than 1 %). To realize miniaturized antennas balling large bandwidth, combination of the bow-tie slot and the meander slot geometries is proposed in this paper. Theoretical results show that the proposed antenna with uniform slot width is 65.5 % smaller than that of the conventional bow-tie antenna in size, while the bandwidth is 3 times larger than that of the meander slot antenna. Moreover, the non-uniform slot width antenna shows 60 % smaller in size and about 3.5 times wider in bandwidth than the previous antennas. Measured antenna performance reveals excellent agreement with the predicted values.

• 대한수의학회지
• /
• 제60권3호
• /
• pp.139-144
• /
• 2020

Ten cadavers were studied to compare the accessibility of cervical vertebral canal with conventional standard ventral slot and modified slanted ventral slot. One group performed standard ventral slot procedures at the C3-4, C5-6. The other group performed modified slanted ventral slot with inverted cone technique procedures at the C3-4, C5-6 computed tomography was performed before and after surgery. The accessibility of cervical vertebral canal with conventional standard ventral slot and modified slanted ventral slot using computed tomography in C3-4 and C5-6 intervertebral space was compared. Although smaller ostectomy was performed in the modified slanted ventral slot, some lesions were more accessible but limitations were obvious in C3-4 and C5-6 intervertebral disk space. After the disc material has been identified through accurate preoperative diagnostic imaging, less morbidity and complications can be expected if the appropriate surgical method is selected based on the lesion of compression.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.130-134
• /
• 2006

This paper presents the reduction characteristics of penetrated electromagnetic fields through a narrow slot in a planar conducting screen of infinite extent. When a plane wave is excited to the narrow slot, the aperture electric field is controlled by the parallel wire or parallel plate connected on the slot. The magnitude of penetrated electromagnetic fields through a narrow slot is controlled by electric field distributions on the slot. An integral equation for the aperture electric field on narrow slots is derived and solved by applying Galerkin's method of moments. The results show that the magnitude of the penetrated electromagnetic field can be effectively reduced by installing the parallel wire or parallel plate on the slot.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.3-6
• /
• 2008

In this paper, we propose the folded PIFA with its made an alteration to a factor of resonance for L-slot PIFA. Proposed antenna maintain diminished size patch and improve each bandwidth of GSM(0.88$\sim$-0.96 GHz) and W-CDMA(1.92$\sim$2,17 GHz) for miniaturized repeater. The non-slot step folded PIFA's structure that design of essence was general L-slot PIFA for dual-band. It has no U-slot, multi band and the another slot. The parameters of proposed antenna were optimized for dual-band and compact size by folded singleness patch. Proposed antenna by using folded singleness patch take satisfaction main point, bandwidth of GSM and W-CDMA, compact patch size($39{\times}21{\times}13mm^3$). The antenna was designed by FDTD simulation tool and it was made from result of simulation. Measured data shown that the proposed non-slot step folded PIFA was strong possibility.

• 한국전자파학회논문지
• /
• 제27권8호
• /
• pp.684-692
• /
• 2016

본 논문에서는 도파관 슬롯 배열 안테나의 요소로서 구형 도파관 광벽 중심에 위치하고, 비대칭 아이리스에 의해 급전되는 종방향 션트 슬롯을 제안하였다. 아이리스의 기구 치수를 적절히 조절하면 원하는 주파수에서 슬롯을 공진시킬 수 있다. 제안된 슬롯은 넓은 범위의 정규화 공진컨덕턴스, 공진시 도파관 내의 최소 위상변화 등의 장점을 가진다. 부가적으로 제안된 슬롯이 도파관 슬롯 배열에 적용될 때 각 슬롯들이 일직선으로 배치되기 때문에 원치 않는 교차편파 준위를 낮출 수 있다. 부엽준위 -20 dB를 가지는 $8{\times}1$ 중앙 급전 도파관 슬롯 배열 안테나를 설계, 제작한 후 실험하였다. 측정결과들은 시뮬레이션 결과들과 잘 일치하고, 주파수 9.41 GHz에서 부엽준위 -18.13 dB, 교차편파 준위는 -48.85 dB로서 종래의 종방향 슬롯배열안테나에 비해 약 15 dB 정도 개선되었다.