• Journal of Biomedical Engineering Research
• /
• v.17 no.2
• /
• pp.165-172
• /
• 1996

A scanning slot digital mammography system Luing a plastic scintillating fiber screen (SFS) is currently being developed To improve the x-ray interaction efficiency and absorption efficiency of an SFS, high Z elements can be added into the scintillating fiber core. In this paper, we investigated theoretically the zero spatial frequency detective quantum efficiency, DQE(0), and modulation transfer function, MTF(f), of three 2 cm thick SFSs made of polystyrene, polystyrene loaded with 5% by weight of lead, and polystyrene Loaded with 10% by weight of tin scintillating fibers. X-ray interaction efficiency, scintillating light intensity distributions and line spread functions were generated using Monte Carlo simulation. DQE(0) and MTF(f) were computed for x-ray energies ranging from 15 to 50 keV. Loading high Z elements into the SFS markedly increased the DQE(0). For x-ray energies used for mammovaphy, DQE(0) values of both high Z element loaded SFSs are about a factor of three higher than the DQE(0) of an Min-R screen. At mammographic x-ray energies, MTF(f) values of all three SFSs are Venter than 50% at 25 Ip/mm spatial frequency, and were found to be dominated by the 20 um individual scintillating fiber diameter used The results show that both hiP DQE(0) and spatial resolution can be achieved with the high Z element loaded SFSs, which make these SFSs attractive for use in a scanning slot detector for digital mammography.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3029-3045
• /
• 2017

The main processes of a cognitive radio system include spectrum sensing, spectrum decision, spectrum sharing, and spectrum conversion. Experimental results show that these stages introduce a time delay that affects the spectrum sensing accuracy, reducing its efficiency. To reduce the time delay, the frequency spectrum prediction was proposed to alleviate the burden on the spectrum sensing. In this paper, the deep recurrent neural network (DRNN) was proposed to predict the spectrum of multiple time slots, since the existing methods only predict the spectrum of one time slot. The continuous state of a channel is divided into a many time slots, forming a time series of the channel state. Since there are more hidden layers in the DRNN than in the RNN, the DRNN has fading memory in its bottom layer as well as in the past input. In addition, the extended Kalman filter was used to train the DRNN, which overcomes the problem of slow convergence and the vanishing gradient of the gradient descent method. The spectrum prediction based on the DRNN was verified with a WiFi signal, and the error of the prediction was analyzed. The simulation results proved that the multiple slot spectrum prediction improved the spectrum efficiency and reduced the energy consumption of spectrum sensing.

• Advances in aircraft and spacecraft science
• /
• v.7 no.4
• /
• pp.309-333
• /
• 2020

The proposed study aims to numerically investigate the performance of hydrofoils in the context of amphibious aircraft application. In particular, we also study the effectiveness of a slotted hydrofoil in minimizing the cavitation phenomenon, to improve the overall water take-off performance of an amphibious aircraft. We use the ICON A5 as a base model for this study. First, we propose an approach to estimate the required hydrofoil surface area and to select the most suitable airfoil shape that can minimize cavitation, thus improving the hydrodynamic efficiency. Once the hydrofoil is selected, we perform 2D numerical studies of the hydrodynamic and cavitating characteristics of a non-slotted hydrofoil on ANSYS Fluent. In this work, we also propose to use a slotted hydrofoil to be a passive method to control the cavitation performance through the boundary layer control. Numerical results of several slotted configurations demonstrate notable improvement on the cavitation performance. We then perform a multiobjective optimization with a response surface model to simultaneously minimize the cavitation and maximize the hydrodynamic efficiency of the hydrofoil. The optimization takes the slot geometry, including the slot angle and lengths, as the design variables. In addition, a global sensitivity study has been carried and it shows that the slot widths are the more dominant factors.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.41-43
• /
• 1993

This paper is proposed a method that optimizes teeth shape of Linear induction motor for high efficiency and slot shape for static end effect minimization in linear induction motor. As a result, unbalance current of each phase in minimized.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.87-92
• /
• 2002

A short-ended electromagnetically coupled coaxial dipole array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are obtained by solving the simultaneous linear equations. The effects of slot and strip numbers on the radiation efficiency, beamwidth and directivity gain of the antenna are presented.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.61-65
• /
• 2015

We have fabricated poly(3,4-ethylenedioxythiophene) : poly(4-styrenesulfonate) (PEDOT : PSS) thin films using a slotdie coater for the applications of OLED lightings. It is demonstrated that the properties of slot-die coated PEDOT : PSS films are comparable with those of spin-coated ones. Namely, the average and peak-to-peak roughness of the slot-die coated 50-nm-thick PEDOT : PSS film are measured to be as low as 0.247 nm and 1.3 nm, respectively. Moreover, we have obtained excellent thickness uniformity (~1.91%). With the slot-die coated PEDOT : PSS films, we have fabricated green phosphorescent OLED devices. For comparison, we have also fabricated OLED devices with spin-coated PEDOT : PSS films. Both show almost no discrepancy in device performance. The power efficiency (25.4 lm/W) and emission uniformity (77%) of OLEDs with slot-die coated PEDOT : PSS films are shown to be slightly lower than those (27.3 lm/W, 80%) of OLEDs with spin-coated PEDOT : PSS films at the luminance of 1,000nit, increasing the feasibility of using a slot-die coating process for the fabrication of large-area OLED lighting sources at a competitive price.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.27-34
• /
• 2012

In this paper, Coplanar waveguide(CPW)-fed slot loop antenna, which is applicable to the dual band(2.4GHz~2.4835GHz, 5.15GHz~5.825GHz) for the wireless LAN, is proposed. In order to miniaturize the proposed antenna, slot loop is bent by meandering. The resonant frequencies in the required dual band are adjusted by variation of the resonant length of slot loop as well as slot width. In particular, use of capacitive coupling CPW feed provides impedance matching without a seperate matching circuit, because the amount of electromagnetic coupling can be controlled by the offset between feed and radiator. As a result, it has been observed that the proposed antenna satisfies not only the required return loss(${\leq}10dB$) but also has high efficiency(${\geq}80%$) over the whole frequency band. In order to check the validity of the proposed antenna, some simulated results for return loss and radiation pattern are presented in comparison with the measured results.

• Cement Symposium
• /
• no.1
• /
• pp.50-55
• /
• 1973

Improvement of grinding efficiency about open circuit grinding mill in cement production was investigated and the results were as follows; 1. Controlled the steel ball by charging ratio. 2. Raised the slot ratio from 3$\%$ to 4.5$\%$

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2016

Purpose - Loading can decrease the productivity due to the possibility of carrying out with the opposite order of storage in container terminal. When the container is to be taken out, it is needed to move the container stacked upon the container to be carried out to other place temporarily. It is called as rehandling. Remarshalling, with the loading plan, is the arranging the containers before the ship arrives in order to avoid the rehandling during the carrying out. The present study tried to find out the factors affecting the efficiency when building the remarshalling plan with the utilization of neighboring storage space as a outer slot, and analyzed the efficiency of several remarshalling algorithms with the combination of those factors. Research design, data and methodology - The present study used, when the remarshalling plan is prepared for utilizing the outer slot, the simulation methods in order to compare the efficiency of the remarshalling algorithms which made with the factors affecting the efficiency. The factors affecting the efficiency are the method of making the child node, method of arrangement, and possibility of application of FIX. In order to analyze the affecting factors on the efficiency, several algorithms are prepared with the combination of production of the child node and the arrangement method with the availability of FIX application. With this algorithm, the effect of the factors on the efficiency after building up of remarshalling plan with the target on the bay with 10 rows, 8 columns, and 10 indices. Results - The method of rearrangement and making of a child node as the factor affecting the efficiency of remarshalling utilization of the outer bay were studied. It is efficient to combine the method of making a child node with MCS in order to reduce the number of moving the containers. For reducing the time in carrying out, it was found that all arrangement methods should be combined with RCS for the efficiency. The result of experiment shows the application of FIX with good result in case of succession ratio. In addition, when FIX was not applied, all of the most combinations resulted in short time in remarshalling. As a result, it can be concluded that the algorithm with proper combination of making the child node and the arrangement can increase the job efficiency based on the importance. Conclusion - The present study suggested and analyzed the algorithms with the combination of the arrangement method, the making of child node, and FIX. It is needed to develop the algorithm to judge the possibility whether the best remarshalling plan can be built or not within the bay in order to find a better method between the two cases such as within the bay and outer the bay. As a method for extending the study on the factors affecting the efficiency, it is possible to find out the way to build the remarshalling plan within the permitted time under any storage situation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.954-959
• /
• 2015

In this paper, 110kW high output density, high efficiency Permanent Magnet Synchronous Motor which can be applied on tram’s traction system is introduced, along with its output and loss characteristics. The motor model is 2pole 18slot model and its size has been reduced through the high speed for high output density. Especially, structure and retainer sleeve structure is applied to its structure, which is also appropriate for high speed rotation. This kind of structure has eddy current loss problem on the surface of rotor, which must be reduced for high output density design. This study has designed the most optimized additional design parameter in order to improve the output characteristics and efficiency of previous produced 2pole 18 slot 110kW motor model and how the width of airgap affects from the loss perspective is mainly analyzed. Finally, the analysis on the extent of the efficiency improvement effect compared to the previous model has performed through electromagnetic FEM analysis. The influence of airgap flux density distribution has also been thoroughly examined.