• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1108-1115
• /
• 2004

A new type of a Rotman lens is presented in this paper fur millimeter-wave applications, such as collision avoidance radar. A dielectric slab Rotman lens is proposed to reduce the conductor loss and to create an appropriate farm for favorable implementation at millimeter-wave frequency. The proposed lens consists of a dielectric slab and slot lines whereas the conventional lenses are constructed with parallel conducting plates. The dielectric slab Rotman lens excited in TE$\_$0/ mode shows a high degree of confinement for the fields, low dispersion, and has an appropriate feed structure. A prototype lens has been designed and fabricated with 9 beam ports and 9 array ports together with 9 tapered slot antennas. This lens has been tested in the range from 10 GHz to 15 GHz and the measured beam widths are about 15$^{\circ}$ at 13 GHz. The measurements also show low mutual coupling between beam ports and an efficiency of about 34.6 %. The overall performance is comparable to that of conventional Rotman lenses even though the prototype was tested at lower than desired frequencies in the microwave frequency range due to our limited resources for fabrications and measurements. It is expected that at millimeter-wave frequency the dielectric slab Rotman lens will have lower conductor loss and lower mutual coupling than conventional Rotman lenses.an lenses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.209-216
• /
• 2003

We design and fabricate slot array antenna for BMWS(Broadband Multimedia Wireless System) applications. This paper presents a simple feed structure, which consists of two horns and a parallel-plate waveguide, because antennas operating at 40.5 GHz~43.5 GHz have considerable feeding losses. The simple feed structure has the advantages of high-efficiency and mass-production. The fabricated antenna has a gain of 25.8 dBi with a sidelobe level below -18 ㏈ and a 3 ㏈ beamwidth of approximately 3$^{\circ}$ in the E-plane. In case of H-plane, a 3 ㏈ beamwidth is 17$^{\circ}$ and a sidelobe level is suppressed to below -27 ㏈. The experimental results are in good agreement with the simulation results. The authors expect that narrow 3 ㏈ beamwidth is obtained by combining a few proposed slot array antennas in parallel.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.337-344
• /
• 2008

Underwater acoustic sensor networks exhibit characteristics such as high propagation delay and low data rates, which are different from those of terrestrial wireless networks. Therefore, the conventional protocols used in wireless networks can be restrictive and inefficient when applied to underwater acoustic sensor networks. In this paper, we propose a medium access control protocol (MAC) to enhance the energy efficiency and throughput in underwater acoustic sensor networks. The proposed protocol employs a slot-based competition mechanism that reserves a time slot to send a data packet in advance. In the proposed protocol, collision between nodes can occur due to competition to obtain a slot. However, the proposed protocol minimizes the collisions between nodes because the nodes store the reservation information of the neighboring nodes, this reduces unnecessary energy consumption and increases throughput. We perform a simulation to evaluate the performance of the proposed protocol with regard to the energy consumption, the number of collision, channel utilization, throughput and transmission delay. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.224-230
• /
• 2009

In the latest date, medical body area networks (MBANs) are emerging as a new technology for diagnosis the human body. MBANs in the health care fields are based on short-range and low-power (e.g. ubiquitous computing) among small-sized devices, and have been used by means of medical services. In this paper, we proposed an emergency message transmission protocol using carrier sense multiple access/time division multiple access in MBANs. This scheme focuses on dependability and power-efficiency. In order to increase the reliability of the transmission, this scheme modified a MCTA slot of IEEE 802.15.3 standard to a SR-MCTA slot. SR-MCTA slot is assigned by MBAN coordinator according to requesting terminal nodes. The method, having the priority of transmission, occurs a collision packet randomly. Results from this proposed solution revel that reservation-based TDMA medical body area network(MBAN) protocol for transmitting emergency message was improved in terms of transmission delay.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.101-108
• /
• 2001

In this paper we focus on dynamic reservation slot allocation scheme for supporting QoS of a voice traffic in WATM MAC. Especially, voice traffic is the most important real-time object, and so we propose a new MAC protocol for voice traffic over WATM networks in the multimedia environment. According to the characteristics of voice traffic which is repeatedly in silent state and active state, new protocol allocates reservation slots dynamically with respect to the number of silent voice source of which starting time is stored to the state table in base station (BS). The simulation results show that the proposed protocol has better performance than slotted ALOHA in average access delay, collision rate, better than NC-PRMA(Non Collision Packet Reservation Multiple Access) in band width efficiency, and can provide a certain level of QoS requirement by the given slot assignment even though the number of voice terminals is increased.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.175-181
• /
• 2006

Nursery pig building is imperative to provide environmental conditions favorable to maintenance of piglet health and the efficiency of growth rate. To meet the ultimate goal, it is necessary to apply proper ventilation design and construction to a confinement livestock building. This study was conducted to investigate the performance of a modified ventilation system in terms of devised slot-inlet (modification I) and exhaust fan (modification II) to improve air change rate in a confined nursery pig building, with dimension of 5.9 m(W) ${\times}$ 12.6 m(L) ${\times}$ 2.2 m(H) in an Darby Genetic Station. The experiment was carried out in August, especially when the outdoor peak temperature were above $30^{\circ}C$ and the measured indoor environmental factors were temperature, air velocity, humidity and ammonia concentration which have been known to affect the piglet health and growth. There was no difference in indoor temperature between the original and modified ventilation systems, however the air velocity and ammonia concentration in confined nursery pig building with modified ventilation system were, in most cases, better performance than original ventilation system. Therefore, it was concluded that the slot-inlet system that kept indoor environmental factors pertinent and had an economic advantage, should be considered as a ventilation system for decreasing sensible heat from piglet in confined nursery pig building during extreme summer season.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.167-173
• /
• 2010

In order to design small printed antenna restricted within narrow area of $30mm{\times}8mm$ for the Zigbee module and improve its return loss, meander slot antenna with a floating conductor as the parastic element has been proposed. The resonant frequency and bandwidth(VSWR${\leq}$2) of the antenna designed and fabricated in the present study is about 2.44GHz and 113MHz respectively. The radiation pattern is almost similar to that of dipole antenna within the operation frequency range. Also the radiation efficiency and gain of the proposed antenna is more than 60% and 2.7dBi respectively. It has been observed that the characteristics the proposed antenna mentioned above satisfy the specification required of the Zigbee application. In order to validate the proposed antenna, some simulated and measured results are presented and compared.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.918-925
• /
• 2021

The perovskite solar cell is a next-generation solar cell that replaces the existing silicon solar cell. It is a solar cell device using an organic-inorganic hybrid material having a perovskite structure as a photoactive layer. It has advantages for the process and has shown rapid efficiency improvement over the past decade. In the process of commercialization of such perovskite solar cells, research and development for a large-area coating method should be carried out. As one of the large-area perovskite solar cell large-area coating methods, the slot-die coating method was studied. By using a meniscus to pass over the substrate and coating the solution, the 3D printer was equipped with a meniscus so that it could be coated. Variables that act during coating include bed temperature, coating speed, N₂ blowing interval, N₂ blowing height, N₂ blowing intensity, etc. By controlling these, the perovskite absorption layer was manufactured and the coating conditions for manufacturing large-area devices were optimized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.9-15
• /
• 2011

The microstrip reflectarray antenna is rapidly becoming an attractive alternative solution to the traditional parabolic reflector antenna. However, the bandwidth of the microstrip reflectarray using the single layer structure is very narrow. To obtain wide bandwidth characteristic, the microstrip reflectarray using the multi-layer structure has been used, but it has some disadvantages such as high cost and complicated design. In this paper, to obtain low cost and wide bandwidth, the microstrip reflectarray antenna composed of square patch with two U-slots using the single-layer structure is proposed. The proposed antenna demonstrate radiation efficiency closed to 55.5 % and 1 dB gain bandwidth over 14 % at 12.5 GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.390-397
• /
• 2008

Permanent Magnet Linear Synchronous Motor (PMLSM) has high efficiency, high energy density, and high control-ability. But, the detent force always is produced by the structure of slot-teeth. There are the disadvantages such as noise and vibration of the apparatuses are induced and the control ability is curtailed because detent force acts as thrust ripple. Therefore, the detent force reduction is an essential requirement in PMLSM. Generally, the method, skewing permanent magnet or slot-teeth, is used to reduce the detent force. But the thrust is decreased at the same time. If permanent magnet is skewed, the lateral force which operates as the perpendicular direction of skew direction is generated in linear guide of PMLSM. So, V-skew model is proposed for the reduction of lateral force. The lateral force acts as braking force in linear motion guide, and it has bad influence to the characteristics of PMLSM. However, these problems will not be solved by 2-dimensional Finite Element Analysis (FEA). So, in this paper 3-dimensional FEA is applied to analyze the PMLSM where permanent magnet is skewed and has overhang. The detent force and thrust characteristics considering skew and overhang effects of permanent magnet are analyzed by 3-dimensional FEA and the results are compared with experimental values to verify the propriety of analysis.