• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.341-351
• /
• 2015

This study is to select the areas to ensure stream space or to implement flood defence measures according to flood frequencies by classifying the stream segment using river bed slope in Mangyeong river. The analysis result for each stream segment showed that the variation of flood inundation area was small in upper stream catchment. But in the lower stream area, the inundation area became larger greatly according to the increase of flood return period. This study classified the catchment of each steam segment as the region of ensuring stream space (ESS), below 10% residential area ratio, and the region of reinforcing flood defence (RFD), over 10% residential area ratio. The analysis results showed that the lower stream area included more RFD regions than upper stream area, and the upper stream area included more ESS regions than lower stream area. In future study, the regions stream spaces can be ensured will be analyzed considering the past stream morphology and the positions of wetlands.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.83-89
• /
• 1998

$TiO_{2-x}$ thin film humidity sensors have been fabricated by sputtering method and their physical and hygroscopic characteristics have been investigated. The sputtering conditions and sintering conditions affect the sensor's sensitivity toward humidity. AES and SEM micrographs were taken for the analysis of crystal structures, surface morphology caused by adsorbed water vapour. $TiO_{2-x}$ humidity sensors showed negative impedance-humidity characteristics and the sensor which was fabricated by experimental condition 2(rf power of 200W) showed higher sensitivity and linearity than others. Then the slope of the sensor was about $0.794\;K{\Omega}/%RH$ and the response time of $TiO_{2-x}$ humidity sensors was about 2 min. for adsorption and about 3 min. for desorption at the operating temperature of $30^{\circ}C$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.6
• /
• pp.505-511
• /
• 2009

The hydriding and electrochemical characteristics of Zr-based $AB_2$ alloy produced by gas atomization have been extensively examined. For the particle morphology of the as-cast and gas-atomized powders, it can be seen that the mechanically crushed powders are irregular, while the atomized powder particles are spherical. The increase of jet pressure of gas atomization process results in the decrease of hydrogen storage capacity and the slope of plateau pressure significantly increases. TEM and EDS studies showed the increase of jet pressure in the atomization process accelerated the phase separation within grain of the gas-atomized alloy, which brought about a poor hydrogenation property. However, the gas-atomized $AB_2$ alloy powders produced by jet pressure of 50 bar kept up the reversible $H_2$ storage capacity and discharge capacity similar to the mechanically crushed particles. In addition, the electrode of gas-atomized Zr-based $AB_2$ alloy of 50 bar showed improved cyclic stability over that of the cast and crushed particulate, which is attributed to the restriction of crack propagation by grain boundary and dislocation with ch/discharging cycling.

• Advances in materials Research
• /
• v.4 no.4
• /
• pp.215-226
• /
• 2015

Experiment on roughness and micro pit defects of SUS 430 ferrite stainless steel was investigated in laboratory. The relation between roughness and glossiness with reduction in height, roll surface roughness, emulsion parameters was analyzed. The surface morphology of micro pit defects was observed by SEM, and the effects of micro pit defects on rolling reduction, roll surface roughness, emulsion parameters, lubrication oil in deformation zone and work roll diameter were discussed. With the increasing of reduction ratio strip surface roughness Ra(s), Rp(s) and Rv(s) were decreasing along rolling and width direction, the drop value in rolling direction was faster than that in width direction. The roughness and glossiness were obtained under emulsion concentration 3% and 6%, temperature $55^{\circ}C$ and $63^{\circ}C$, roll surface roughness $Ra(r)=0.5{\mu}m$, $Ra(r)=0.7{\mu}m$ and $Ra(r)=1.0{\mu}m$. The glossiness was declined rapidly when the micro defects ratio was above 23%. With the pass number increasing, the micro pit defects were reduced, uneven peak was decreased and gently along rolling direction. The micro pit defects were increased with the roll surface roughness increase. The defects ratio was declined with larger gradient at pass number 1 to 3, but gentle slope at pass number 4 to 5. When work roll diameter was small, bite angle was increasing, lubrication oil in micro pit of deformation zone was decreased, micro defects were decreased, and glossiness value on the surface of strip was increased.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.345-358
• /
• 2002

The flow apportioning algorithms with digital elevation models have been developed to reflect reasonable flow divergence properties but they showed several defects related to the connectivity of channel cells, various divergence features along to local topography and channel cells' size etc. Topographic data used by existing flow apportioning algorithms are flow accumulation area and local slope. However, the size and location of channel cells which play the dominant role in the flow pathway were not properly considered. Therefore, a new flow apportioning algorithm considering various flow divergence characteristics in the complicate terrain is proposed. The GA optimization scheme is used to represent the location and scale of the channel pixel. Improved result can be obtained by using both a new flow apportioning algorithm and optimization.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.68.1-68.1
• /
• 2012

We present a comprehensive study of the stellar populations in two faint M31 dwarf satellites, And XI and And XIII. Using deep archival images from the Wide Field Planetary Camera 2 (WFPC2) onboard the Hubble Space Telepscope (HST), we characterize the horizontal branch (HB) morphologies and the RR Lyrae (RRL) populations of these two faint dwarf satellites. Our new template light curve fitting routine (RRFIT) detected RRL populations from both galaxies. The mean periods of $RR_{ab}$ (RR0) stars in And XI and And XIII are < $P_{ab}$ > = $0.621{\pm}0.040$, and < $P_{ab}$ > = $0.648{\pm}0.038$ respectively. Even though the RRL populations show a lack of $RR_{ab}$ stars with high amplitudes (Amp(V) > 1.0 mag) and relatively short periods ($P_{ab}$ ~ 0.5 days), their period - V band amplitude (P-Amp(V)) relations track the lower part of the general P-Amp(V) trend in the M31 outer halo RRL populations. The metallicities of $RR_{ab}$ stars were calculated via the [Fe/H]-log $P_{ab}$-Amp(V) relationship of Alcock et al. The metallicities thus obtained ($[Fe/H]_{And}$ $_{XI}=-1.75%$; $[Fe/H]_{And}$ $_{XIII}=-1.74$) are consistent with the values calculated from the RGB slope indicating that our measurements are not significantly affected by the evolutionary effects of RRL stars. We discuss the origins of And XI and And XIII based on a comparative analysis of the luminosity-metallicity (L-M) relation of Local Group dwarf galaxies.

• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.377-384
• /
• 2023

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H₂) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO₄) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO₄ had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec^-1 at a current density of 10 mA cm^-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.685-695
• /
• 2012

We studied the detailed bathymetry and the geophysical characteristics of the summit of the Dokdo volcano using mutibeam echosounding and geophysical survey data. The bathymetry around the main east and west islets of the Dokdo volcano shows very shallow within about 10 m water depth. From near islets to about 30 m b.s.l., the shallow water area has very steep slope and many irregular sunken rocks. The area from about 30 m to about 80 m b.s.l. shows gentle rises and falls, and less steep slope. The area from 80 m b.s.l. has gradually flat undulation and smooth slope seabaed and is extended to offshore. The main islets of the Dokdo volcano and the rocky sea bottom elongated from the islets might be the residual part of the eroded and collapsed main crater of the Dokdo volcano. The bathymetry and the seafloor image(from backscattering) data show small craters, assumed to be formed by the eruption of later volcanism. The seafloor images propose that, except some areas with shallow sand sedimentary deposits, there are typical rocky bottom such as rocky protrusions and lack of sediments in the main morphology of the survey area. The stepped slopes of the seabed are deduced to be submarine terraces. The several prominent submarine terraces are found at the summit of the Dokdo volcano, suggesting repetition of sea level changes(transgressions and regressions) in the Quaternary. The results of the magnetic anomaly and the analytic signal have a good coherence with other geophysical consequences regarding to the location of the residual crater.

• Archives of Pharmacal Research
• /
• v.21 no.6
• /
• pp.645-650
• /
• 1998

The dual drug-loaded alginate beads simultaneously containing drug in inner and outer layers were prepared by dropping plain (single-layered) alginate beads into $CaCl_2$ solution. The release characteristics were evaluated in simulated gastric fluid for 2 h followed by intestinal fluids thereafter for 12 h. The surface morphology and cross section of dual drug-loaded alginate beads was also investigated using scanning electron microscope (SEM). The poorlv water-soluble ibuprofen was chosen as a model drug. The surface of single-layered and dual drug-loaded alginate beads showed very crude and roughness, showing aggregated particles, surface cracks and rough crystals. The thickness of dual drug-loaded alginate beads surrounded by outer layer was ranged from about 57 to 329mcm. The distinct chasm between inner and outer layers was also observed. In case of single-layered alginate bead, the drug was not released in gastric fluid but was largely released in intestinal fluid. However, the release rate decreased as the reinforcing $Eudragit^{\circledR}$ polymer contents increased. When the plasticizers were added into polymer, the release rate largely decreased. The release rate of dual drug-loaded alginate beads was stable in gastric fluid for 2 h but largely increased when switched in intestinal fluid. The drug linearly released for 4 h followed by another linear release thereafter, showing a distinct biphasic release characteristics. There was a difference in the release profiles between single-layered and dual drug-loaded alginate beads due to their structural shape. However, this biphasic release profiles were modified by varying formulation compositions of inner and outer layer of alginate beads. The release rate of dual drug-loaded alginate beads slightly decreased when the outer layer was reinforced with $Eudragit^{\circledR}$ RS1OO polymers. In case of dual drug-loaded alginate beads with polymer-reinforced outer layer only, the initial amount of druc released was low but the initial release rate (slope) was higher due to more swellable inner cores when compared to polymer-reinforced inner cores. The current dual drug-loaded alginate beads may be used to deliver the drugs in a time dependent manner.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2012

River is able to change by various environmental factors. In order to conduct river restoration design, it is necessary to evaluate the stable channel through the analysis of past and present river channels. River evaluation requires various data, such as geometry, hydraulic and hydrology, but there is a lot of difficulty to understand topographical information of river change on time and space due to a lack of past data by domestic conditions. This study was analyzed abandoned channel formation, changes in the vertical-section and cross-section length of rivers, and micro-landform changes etc using an image analysis technique. Purpose of this research is to evaluates the stable channel through a river channel morphology change from past and present river channels image. Mangyoung river was conducted artificial river maintenance through straight channel consolidation form 1920 to 1930 year. In the result river maintenance, mangyoung river length was decreased by 15 km and abandoned channels of six points were made. Since then, weir was continuously increased to control bed slope and use water. Install of weir was to be the reason of changes on channel width, thalweg, vegetated bar, sand bar, water area. Present Mangyoung river show that water area was temporary increased in upper and middle reach because of weir installation. Total sand bar was only decreased in upper channel. The change of vegetated bar and sand bar was slight recently. In this result, Mangyoung river is inferred to reach stabilized channel although there is some difference to the lower reach.