• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.303-311
• /
• 2002

Recently, the research that analyze topography parameters that need in hydrology analysis using GIS techniques is achieved. DEM that is used in topography analysis can be constructed effectively using contour data of digital map. Therefore, DEM's applicability is increasing gradually in several fields. In this study, DEM of 20∼l00m grid size was applied PYONGCHANG river and JUBANG river basin to analyze what effect DEM grid size causes about slope and drainage watershed at topography parameter extraction. This study drew a regression equation about slope change by DEM grid size. As a result, according as DEM grid size increases, slope decreases, and basin area could know that is not change almost.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.2
• /
• pp.1-14
• /
• 2019

This study analyzed the relativity between block stream and talus distributions by employing a likelihood ratio approach. Possible distribution sites for each debris slope landform were extracted by applying a spatial integration model, in which we combined fuzzy set model, Bayesian predictive model, and logistic regression model. Moreover, to verify model performance, a success rate curve was prepared by cross-validation. The results showed that elevation, slope, curvature, topographic wetness index, geology, soil drainage, and soil depth were closely related to the debris slope landform sites. In addition, all spatial integration models displayed an accuracy of over 90%. The accuracy of the distribution potential area map of the block stream was highest in the logistic regression model (93.79%). Eventually, the accuracy of the distribution potential area map of the talus was also highest in the logistic regression model (97.02%). We expect that the present results will provide essential data and propose methodologies to improve the performance of efficient and systematic micro-landform studies. Moreover, our research will potentially help to enhance field research and topographic resource management.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2012

Separate extraction of source ($R_S$) and drain ($R_D$) resistances caused by process, layout variations and long term degradation is very important in modeling and characterization of MOSFETs. In this work, we propose "Avalanche Hot-Source Method (AHSM)" for simple separated extraction of $R_S$ and $R_D$ in a single device. In AHSM, the high field region near the drain works as a new source for abundant carriers governing the current-voltage relationship in the MOSFET at high drain bias. We applied AHSM to n-channel MOSFETs as single-finger type with different channel width/length (W/L) combinations and verified its usefulness in the extraction of $R_S$ and $R_D$. We also confirmed that there is a negligible drift in the threshold voltage ($V_T$) and the subthreshold slope (SSW) even after application of the method to devices under practical conditions.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.94-98
• /
• 2008

A fundamental study was developed concerning the novel solvent extraction of the tetravalent metal ions; zirconium(IV), hafnium(IV) and thorium(IV). Their extraction behavior in toluene was investigated with a recently synthesized naphthol-derivative Schiff base, 1-({[4-(4-{[(E)-1-(2-hydroxy-1-naphthyl)methyliden]amino}phenoxy) phenyl]imino}methyl)-2-naphthol (HAPMN). The spectrophotometrical examination of the complex formation between HAPMN and the Zr(IV), Hf(IV) and Th(IV) ions in acetonitrile revealed the formation of stable 1:1 complexes in the solution. After the thorium extraction in toluene, it was found that [Th(OH)3HA] was the respective deriving substance. While, in the case of zirconium and hafnium extraction, the extracted adduct was found to be [M4(OH)8(H2O)16Cl62HA]. The stoichiometric coefficients of these extracted species were determined by the slope analysis method. The extraction reaction followed a cation exchange mechanism.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.152-161
• /
• 2017

Making precise 3D maps using Mobile Mapping System (MMS) sensors are essential for the development of self-driving cars. This paper conducts research on the extraction of 3D objects around the roads using the point cloud acquired by the MMS Light Detection and Ranging (LiDAR) sensor through the following steps. First, the digital surface model (DSM) is generated using MMS LiDAR data, and then the slope map is generated from the DSM. Next, the 3D objects around the roads are identified using the slope information. Finally, 97% of the 3D objects around the roads are extracted using the morphological filtering technique. This research contributes a plan for the application of automated driving technology by extracting the 3D objects around the roads using spatial information data acquired by the MMS sensor.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.471-480
• /
• 2008

The deaf can not recognize useful sound informations such as alarm, doorbell, siren, car horn, and phone ring etc., because they have the hearing impairment. To solve this problems, portable hearing assistive devices which have suitable environment sound recognition methods are needed. In this paper, the DTW algorithm for sound recognition system with new active slope weighting constraint method was proposed. The environment sound recognition methods consist of three processes. First process is extraction of start point and end point using frequency and amplitude of sound. Second process is extraction of features and third process is classification of features for given segments. As a result of the experiment, the recognition rate of the proposed method is over 90%. And, the recognition rate of the proposed method increased about 20% than the conventional algorithm. Therefore if there are developed portable assistive devices which use developed method to recognize environment sound for hearing-impaired persons, they could be more convenient in life.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.46-58
• /
• 2016

In this study, a LIDAR laser scanner was used to scan a rock slope around Mt. Gwanak and to produce point cloud from which directional information of rock joint surfaces shall be extracted. It was analyzed using two different algorithms, i.e. Ball Pivoting and Wrap algorithm, and four sampling intervals, i.e. raw, 2, 5, and 10 cm. The results of Fuzzy K-mean clustering were analyzed on the stereonet. As a result, the Ball Pivoting and Wrap algorithms were considered suitable for extraction of rock surface orientation. In the case of 5 cm sampling interval, both triangulation algorithms extracted the most number of the patch and patched area.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.463-471
• /
• 2018

The present paper deals with the liquid-liquid extraction and flat sheet supported liquid membrane studies of Pd(II) separation from nitric acid medium using a novel synthesized ligand, namely, N,N,N',N'-tetraethyl-2,2-thiodiethanthiodiglycolamide (TETEDGA). The effect of various diluents and stripping reagents on the extraction of Pd(II) was studied. The liquid-liquid extraction studies showed complete extraction of Pd(II) in ~ 5 min. The influence of nitric acid and TETEDGA concentration on the distribution of Pd(II) has been investigated. The increase in nitric acid concentration resulted in increase in extraction of Pd(II). Stoichiometry of the extracted species was found to be $Pd(NO_3)_2{\cdot}TETEDGA$ by slope analysis method. Extraction studies with SSCD solution showed negligible uptake of Pt, Cr, Ni, and Fe, thus showing very high selectivity and extractability of TETEDGA for Pd(II). The flat sheet supported liquid membrane studies showed quantitative transport of Pd(II), ~99%, from the feed ($3M\;HNO_3$) to the strippant (0.02 M thiourea diluted in $0.4M\;HNO_3$) using 0.01 M TETEDGA as a carrier diluted in n-dodecane. Extraction time was ~160 min. Parameters such as feed acidity, TETEDGA concentration in membrane phase, membrane porosity etc. were optimized to achieve maximum transport rate. Permeability coefficient value of $2.66{\times}10^{-3}cm/s$ was observed using TETEDGA (0.01 M) as carrier, at 3 M, $HNO_3$ feed acidity across $0.2{\mu}m$ PTFE as membrane. The membrane was found to be stable over five runs of the operation.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1425-1434
• /
• 2021

Continuous and periodic data acquisition must be preceded to maintain and manage the river facilities effectively. Adapting the existing general facilities methods, which include river surveying methods such as terrestrial laser scanners, total stations, and Global Navigation Satellite System (GNSS), has limitation in terms of its costs, manpower, and times to acquire spatial information since the river facilities are distributed across the wide and long area. On the other hand, the Mobile Mapping System (MMS) has comparative advantage in acquiring the data of river facilities since it constructs three-dimensional spatial information while moving. By using the MMS, 184,646,009 points could be attained for Anyang stream with a length of 4 kilometers only in 20 minutes. Levee points were divided at intervals of 10 meters so that about 378 levee cross sections were generated. In addition, the waterside maximum and average slope could be automatically calculated by separating slope plane form levee point cloud, and the accuracy of RMSE was confirmed by comparing with manually calculated slope. The reference slope was calculated manually by plotting point cloud of levee slope plane and selecting two points that use location information when calculating the slope. Also, as a result of comparing the water side slope with slope standard in basic river plan for Anyang stream, it is confirmed that inspecting the river facilities with the MMS point cloud is highly recommended than the existing river survey.

• Phonetics and Speech Sciences
• /
• v.7 no.1
• /
• pp.97-105
• /
• 2015

This research mainly focuses on intonational characteristics of synchronous English speech. Intonation contours were extracted from 1,848 utterances produced in two different speaking modes (solo vs. synchronous) by 28 (12 women and 16 men) native speakers of English. Synchronous speech is found to be slower than solo speech. Women are found to speak slower than men. The effect size of speech rate caused by different speaking modes is greater than gender differences. However, there is no interaction between the two factors (speaking modes vs. gender differences) in terms of speech rate. Analysis of pitch point features has it that synchronous speech has smaller Pt (pitch point movement time), Pr (pitch point pitch range), Ps (pitch point slope) and Pd (pitch point distance) than solo speech. There is no interaction between the two factors (speaking modes vs. gender differences) in terms of pitch point features. Analysis of sentence level features reveals that synchronous speech has smaller Sr (sentence level pitch range), Ss (sentence slope), MaxNr (normalized maximum pitch) and MinNr (normalized minimum pitch) but greater Min (minimum pitch) and Sd (sentence duration) than solo speech. It is also shown that the higher the Mid (median pitch), the MaxNr and the MinNr in solo speaking mode, the more they are reduced in synchronous speaking mode. Max, Min and Mid show greater speaker discriminability than other features.