• 동력기계공학회지
• /
• 제5권2호
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.20-26
• /
• 2012

본 연구의 목적은 비접촉식 레이저 여기 표면파의 비선형성 계측을 통하여 소성 변형된 알루미늄 합금의 소성변형을 평가하고자 하는 데 있다. 슬릿마스크와 고출력 펄스 레이저를 통한 선배열 레이저빔을 이용하여 협대역의 표면파를 발생 시켰으며, 표면파의 음향 비선형 특성을 이용하기 위하여 슬릿 마스크의 열림 폭과 간격을 변화시킴으로써 레이저 여기 표면파의 주파수 특성을 제어하였다. 스트로크 제어를 통한 인장시험을 통하여 단계별 인장 소성변형 정도를 달리하는 시험편을 제작하였다. 실험결과 인장 소성 변형율이 커짐에 따라 음향 비선형 파라미터는 증가하였으며, 경도 및 EBSD 측정결과 손상의 정도와 매우 밀접한 관계를 보였다. 결과적으로 본 연구에서의 레이저 여기 표면파의 비선형 평가기법은 알루미늄 합금의 소성변형 평가에 매우 유용할 것으로 판단된다.

• 복식문화연구
• /
• 제22권5호
• /
• pp.670-687
• /
• 2014

This study focused on Jungchimak (coats with side slits) which was typically worn by men in the mid and late Joseon Dynasty. It was done research by examining the case of wearing Jungchimak centering on literature and paintings and analyzing its changes in terms of its form based on the relics that have been found in order to suggest the standard for the evaluation of the period of Jungchimak. Results are as follows. First, men who wore Jungchimak were the king, crown prince and Aristocratic under the official uniform or other robes or as ordinary clothes and shroud. Second, Jungchimak for king was mostly made of Dan (satin damask) and mostly jade green & navy in color, and it commonly used dragon pattern, cloud and treasure pattern, or grape pattern. The fabric used to make Jungchimak for crown prince was Dan & Ju (coarse-finished silk) and puple, green, jade green & navy in color. The fabric used to make Jungchimak for Aristocratic was Ju and indigo or white in color. Third, 251 relics have been announced until now. Most of them were made of silk fabric and had cloud and flower patterns. Fourth, Jungchimak showed changes through time in terms of collar and sleeve shapes, the ratio of armhole to sleeve opening, Geotseop (panel sewn on front opening for overlapping), Dang and Mu (side panel), the ratio of the total length of outer collar to the length of side slits, and the ratio of chest size to the width of lower end.

• 복식
• /
• 제52권7호
• /
• pp.123-138
• /
• 2002

This study as one of a series of systematic studies about dancing costumes will compare the costumes of the 16th. 17th century with their normal style of dress. In brief. this study wants people to know about 16th, 17th century court dancing costumes and to understand the culture in the 16th.17th century. From the comparison between the court's dancing costume and the people's clothes, we could get the conclusion as follows. First, pourpoint. chemis, gown, chausses, etc. that people wore were used for the court's dancing costume. While people Pursued the beauty with the ample silhouette. there were used wrinkles. slits. and tailored oblique line-clothes that gave vitality. Second, silk. linen. brocade. etc. that were used for people's chemises were used for the dancing costume. The good quality and beautiful colors of the dancing costume. however. excelled than of the brilliant court's clothes and the people's clothes. Third. the hair style of dancers were very colorful. For example, there were many kinds of hats and furs, corals, etc. that were attached to them on the most of the long curly hair. In summary, for the court's dancing costume, the same type of clothes was used like the people's clothes. There, however, were differences. The slits, tailored oblique line-clothes and shortened skirt gave the activity. There were many decorations symbolizing the nobles' wealth and Power. Especially the use of the decoration of hair and other stake properties was an effective means for expression. The use of personified masks also contributed to the development of the court dance.

• 생명과학회지
• /
• 제16권5호
• /
• pp.859-865
• /
• 2006

옥수수(Zea mays) 자엽초 박편을 분리하여 완충용액에 띄워 배양하면 조직 내부와 외부 사이의 장력 차이에 의하여 밖으로 굽어진다. 그러나 외부에서 옥신을 처리하면 안으로 굽어지는 반응이 나타나는데, 그 반응 정도는 옥신 농도에 따라 변화하였다. 본 연구에서는 옥신에 의하여 자엽초 박편이 안으로 굽어지는 현상을 옥신과 함께 작용하는 물질들을 선별하기 위한 실험에 이용하였다. 옥수수 자엽초의 메탄올 추출물로부터, 옥신에 의해 안으로 굽어지는 자엽초 박편의 반응을 촉진하는 활성을 발견하였다. 이러한 촉진 활성은 에너지원과 관련된 현상은 아니었다. 활성물질은 pH 10과 같은 높은 pH에서도 $C_{18}$ 컬럼에 흡착되어 메탄올로 용리되었으며, 50% 메탄올과 80% 메탄올에 의하여 용리되는 두 가지 물질을 발견하고 각각 Curvature-Enhancing Factor-1 (CEF-1)과 Curvature-Enhancing Factor-2 (CEF-2)라 명명하였다. 그중 CEF-2의 HPLC를 이용한 분리 조건이 확립되었다.

• 한국농촌건축학회논문집
• /
• 제22권2호
• /
• pp.1-8
• /
• 2020

This study is intended to derive the adaptive reuse techniques through the history and aspects of new construction, extension, repair, and other works, limited to the deep and narrow lots facing Seongan-gil and Nammun-gil in Nammun-ro 2 ga of Cheongju, the historic urban area. The results are as follows. 1) In the case of newly built reinforced concrete buildings, the central part of the top floor of the residence or all floors are opened to the open space(void) to facilitate lighting and ventilation. This is developed as a convection phenomenon due to the temperature difference from the slits between buildings, which affects the entire air flow of the block. 2) The buildings of extension and repair are composed of two-story masonry or steel frame, both the front store facing the road and the house on the back, but it looks like one because it is in contact with each other. If only a small gap between the front and rear buildings is restored to an external space or a space equipped with sun light, a small breath can be provided in lighting and ventilation. 3) The existing two-story wooden stores and houses have lost their external space due to repairs. With minimal intervention to restore the small courtyard, slits, and space under the eaves, it will not only improve lighting and ventilation, but also create a unique appearance as a segment of the elongated store.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.69-77
• /
• 2017

This paper introduces an optical encoder using the reflection in the slit. The digital optical encoder is a sensor to generate a pulse according to the displacement. An optical encoder is composed of 3 parts: light source, slit plate and light-receiving element. In a conventional encoder, one slit produces one signal. The resolution of the digital optical encoder is determined by the number of slits in the encoder plate. The small slit size is most important among the factors that determine the resolution in a generic-type optical encoder. However, a small slit has low productivity and technical difficulties, so analog optical encoders have emerged as an alternative. Nonetheless, this alternative requires additional circuitry and equipment because of the noise and drafts in the analog signals. A new sensor is presented in this paper with a high resolution and a slit of the same size using the reflection in the slit. Then, the path of the light that passes through the slit ccording to the shape was analyzed, and some paths were expressed in the mathematical expressions. In addition, the optical paths were analyzed in the rectangular, octagonal, and circular encoders, and shown the obtained number of signals per slit by using them. Thus, we confirm that this method has the best performance in circle-shaped slits.

• 한국전자파학회논문지
• /
• 제22권3호
• /
• pp.275-281
• /
• 2011

본 논문에서는 UWB 통신을 위한 변형된 접지 면을 갖는 소형 평판형 모노폴 안테나를 제안하였다. 제안된 안테나는 UWB 통신에 적합한 초광대역 특성(3.1~10.6 GHz)을 만족하면서, 5 GHz WLAN 대역(5.15~5.35 GHz, 5.470~5.825 GHz)에 주파수 대역 저지 특성을 갖는다. 제안된 안테나는 접지 면에 두 개의 슬릿을 통해 임피던스 정합 특성을 향상시켰으며, 슬릿의 중앙으로부터 저지 대역의��${\lambda}$/4 길이를 갖는 두 개의 개방 스터브를 형성하여 주파수 대역 저지 특성을 유도하였다. 제작된 안테나는 저지 대역인 5.08~5.83 GHz를 제외하고, 2.88~10.83 GHz 대역에서 VSWR${\leq}$2를 만족한다.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.225-234
• /
• 2001

This paper represents the vector fields, three dimensional mean velocities, the turbulent intensities, the turbulent kinetic energy, and the Reynolds shear stresses in the X-Y plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rates 350 and 450ℓ/min respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component exists in the narrow slits situated radially on the edge of gas swirl burner, for that reason, there is some entrainment phenomena of ambient air in the outer region of burner. Moreover, mean velocities in the initial region are largely distributed near the outer region of burner at Y/R≒0.97, but they diffuse and develop into the center flow region of burner according to the increase of axial distance. The turbulent intensities and the turbulent kinetic energy due to large inclination of mean velocity and swirl effect show that the maximum value in the initial region of burner is formed in the narrow slits situated radially on the edge of gas swirl burner and large values are mainly formed in the entire region of burner after X/R=2.4358, hence, the combustion reaction is anticipated to occur actively near this region. And the Reynolds shear stresses are also largely distributed from slite to vanes of gas swirl burner in the intial region, but their values largely disappear after X/R=3.2052.

• 복식문화연구
• /
• 제31권6호
• /
• pp.776-792
• /
• 2023

This study aims to analyze the traditional attire of four ethnic minority groups in Northeastern China: Daur, Ewenki, Oroqen, and Hezhen, considering their natural environment, lifestyles, and cultural influences. A literature review of academic papers, books, and online resources was conducted, along with indirect investigations through artifacts. The Daur people, being equestrian, have garments with deep slits, vibrant colors, and elaborate decorations. The Ewenki people wear clothes made of fabric in the summer and primarily deer skin in the winter, and their clothing is simple and not flashy. The Oroqen people's clothing typically has slits at the front, back, or on both sides, and they wear a waist belt. The Hezhen people, an ethnic group that primarily hunts and fishes, wear two-piece clothing with a hip-length top and pants or other fur-trimmed garments. All groups incorporate symbolic patterns influenced by Shamanism, along with animal headgear and leather shoes. We observed that the traditional costumes of ethnic minority groups in Northeastern China share many commonalities in form, but there are detailed differences in material, shape, color, and decoration due to unique geographical and climatic characteristics as well as differences in livelihood. Additionally, the structure of clothing varies depending on each tribe's shamanistic practices and lifestyle.