• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.543-555
• /
• 1997

Generally, in a steel-concrete composite gilder, the shear connector which was constructed between concrete deck and steel girder should have enough stiffness to behave as one body, because the conformity between plate and concrete deck is influences by the stiffness and spacing of the shear connectors. If the stiffness of shear connectors are insufficient, slip would happen at the contact surface. Partial interaction is the case that takes account of slips. In this paper, an easy method is presented to evaluate the stiffness or spacing of the shear connector according to the degree of imperfection without difficult calculations for a composite gilder with partial interaction. Also, the horizontal shearing force applied to the shear connector and the longitudinal axial force, which is occurs at contact surface between concrete deck and steel girder, have been presented in a simple influence line that is various to the parameters of sectional properties, degree of imperfection and applied load points. Furthermore, through the case study, it determined the relationships between the degree of imperfection and the follows 1) spring constants 2) axial force and horizontal shearing force 3) stress and neutral axis by using the partial differential equation based on Newmark's Partial Interaction Theory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.397-405
• /
• 2008

The position accuracy is primarily dependent on the satellite position and signal delay caused by several elements. To know the effect of the delay on the estimated positions, we simulated GPS raw data (RINEX) with GPS errors using Bernese ver5.0. GPS errors used in this paper are Ionospheric delay, Cycle slip, Troposphere, DOP and Random error. If the baseline is short, the position error according to TEC is not large, since the ionospheric delay effect can be removed by ion-free combination. However, if the baseline is long, 3 dimensional position error up to 10cm is occurred. The 3D position error of coordinates with cycle slip is hardly ever changed up to 60% of cycle slip. Because the simulated cycle slips are equally distributed on satellites, the positioning was not seriously affected by the cycle slip. Also, if percentage of cycle slip is 60%, three dimensional error is sharply increased over 1m. The position error is calculated by using the observation data (2 hours) which was selected by DOP less than 3. And its accuracy is more improved about $3{\sim}4cm$.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.2
• /
• pp.124-129
• /
• 2003

The objectives of this study are to manufacture an efficient $TiO_2$, photocatalyst and to delineate optimum operational parameters for TCE (trichloroethylene) degradation in a photocatalytic oxidative reactor. The $TiO_2$ photocatalyst irradiated by 365 nm UV light is expected to increase degradation of TCE in solution by a series of photocatalytic oxidations in the reactor. A new membrane $TiO_2$ photocatalyst wns eventually developed by coating a mixture of Davan-C(0.24 wt%) and PVA(0.16 wt%) on the surface of slips using the slip-casting method. Results show that increase in the number of coating of $TiO_2$ sol on surface of photocatalysts and in the surface thickness improved the endurance and photocatalysts, but these physical modifications caused significant decrease in the overall degradation efficiency of TCE. Pre-aeration or recirculation of the influents to the reactors containing TCE increased degradation efficiency of TCE. The optimum operational conditions far the surface area of photocatalysts and UV light intensity appeared to be $1.47\;mL/cm^2$ and $225\;W/cm^2{\times}100$, respectively, in the reactor. Based on the overall experimental results, the photocatalytic oxidation of TCE with the new membrane $TiO_2$ photocatalyst is found to be very effective under the operational conditions delineated in this study.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.176-189
• /
• 2002

The purpose of this study were to illustrate the various medication error types and causes and identified to related drugs to provide basic data for preventing nurses' medication error by analysing 73 cases of AJN 'medication Error' column(1993, Oct -2000, Nov). Nurses' types of medication error were classified into 7 types. The most frequent error types are wrong medication$(21.9\%)$ and the wrong dose$(21.9\%)$ together. The others are wrong $time(4.1\%)$, $omission(2.7\%)$, mechanical $error(2.7\%)$, incorrect IV $rate(1.4\%)$. wrong route $administration(1.4\%)$ in order. Nurses' causes of medication error were 9 kinds. The most frequent type is confusing between similar drug shape, color, size, name, injection devices and patient's $name(43.9\%)$ and the others are lack of knowledge about $drugs(26.8\%),\; slips(7.3\%),\; miscalculating\;dose(4.9\%)$, incorrect adjusts $devices(4.9\%)$, difficulty to read or illegible decimal $point(4.9\%),$ $abbreviation(2.4\%)$, fatigue with $overwork(2.4\%)$ and no communication with $patient(2.4\%)$ in order. Related drugs with medication error are as follows. - dose unit(IU. minims. mcg/min. mEq) : Heparin. insulin. synthetic calcitonin, some enzymes and hormones, vitamins, some antibiotics, tuberculin injection. MgSO4 injection. nitroglycerin - similar size, color and shape drug : $0.9\%$ N/S and acetic acid $0.25\%$ for irrigation. premixed 2mg lidocaine sol. and $0.9\%$ N/S, gentamycin 20mg/2mL for children and 80mg/2mL for adult, dextroamphetamine 5mg and 10mg capsule. sedatives chloral hydrate 250mg/5mL and 500mg/5mL - similar name :Aredia(pamidronate disodium) and Adriamycin(doxorubicin), Lamictal (lamotrigine) and Lamisil 250mg. Elderpryl and enalapril, cefotaxime and cefoxitin, carboplatin and cisplatin, sumatriptan and zolmitriptan, Celebrex and Celexa, Humulin and Humalog, Percodan and Percocet, Diabeta and Diabinese, Epivir and Retrovir, Xanax(alprazolam) and Zantac(ranitidine) - decimal point : low molecular weight warfarin, methotrexate - unfamiliar drug uses of familiar drug ; methotrexate. droperidol, imipramine, propranolol - number of drug name(misleading chemical name) : 6-thioguanine, 6-mercaptopurine, 5-fluorouracil - type of administration route : Oxycodone(OxyContin). - administration time : acarbose(Precose). - injection way (Z-track method): hydroxyzine - epidural cathether : LMWHs(enoxaparin, dalteparin), - ADD Vantage self contained delivery system : ceftriaxone(Rocephin)

• Korean Journal of Health Education and Promotion
• /
• v.19 no.2
• /
• pp.57-72
• /
• 2002

Students spend most of their time in school. Schools have the possibility of unanticipated accidents, however, and the rate of accidents in schools is increasing. The purpose of this study were to understand the accidents that arise in schools as well as the school safety management system and by analyzing affects that school safety management system has on accidents in schools, to come lip with a preventive plan. 906 high school sophomore students attending in Seoul were surveyed 1Tom November 12th to 23rd 2001. The results were following: 1. Students surveyed comprised of the following: Male 48.9%, Female 51.1% Public Schools 32.6%, Private Schools 67.4% Boys Schools 48.9%, Girls Schools 51.1% 2. In the past year, male students had more accidents(p〈.05) in school. 3. In examining students safety management control, 94.0% said that, there is an infirmary, there is a clear distinction between the playing fields and pathways(74.8%), and the chemicals in the labs are kept in a safe manner(77.2%). The above items were generally well maintained. However, the following recorded low scores. There are warning signs in hazardous places and facilities(30.5%), There is guiding principle to examine the safeness on a regular basis(24.9%), and There are slogans and posters preventing accidents(40.3%). 4. In examining the facilities of the schools that were surveyed, the majority answered, yes to the following. There are hazardous facilities or materials at school(62.9%), There are sharp edges in educational supplies and equipment(59.8%), There are nails or other components that are sticking out of desks and chairs(75.9%), There are slippery spots in the corridors and classrooms(69.3%), There are stones, scrap metal, broken glass, and trash on the playing fields(66.6%). Furthermore, the students surveyed said, yes to the following although in low percentages. The amount of sand on the playing fields is sufficient(49.1%), The soccer and basket goal posts are fastened (53.7%), There are safety bars on the windows of classrooms and corridors (27.4%), There are safety mats on the entrance to restrooms preventing slips (14.2%), The stairs have slip protection measures(49.1%). 5. In analyzing the affect that the school safety management system has on accidents in school, schools that had slogans and posters preventing accidents had a 50% less chance of accidents(p〈.05), schools with chemicals and equipment in the labs that were safely maintained had an 80% less probability of accidents(p〈.0l), and the schools that had sharp edges in the educational supplies and equipment had an 80% greater chance of accidents(p〈.01).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.367-372
• /
• 2017

This work was conducted to identify sweet potato [(Ipomoea batatas (L.) Lam.)] cultivars showing high yield and processing suitability in the Jeonbuk region of Korea. Shoot-slips (30 cm in length) of 14 cultivars were planted with a planting density of $75{\times}25cm$ on May 30, and cultivated with black film mulching. Vine elongation at 30 days after planting was significantly increased (> 90 cm) in 'Dahomi' and 'Sinhwangmi', and was excellent (> 250 cm) 120 days after planting in 'Sinhwangmi', 'Shinyulmi', 'Daeyumi', 'Jinhongmi', and 'Yeonhwangmi'. The branch number per plant showed a dramatic increase in 'Shinzami' 30 and 120 days after planting. The leaf number per plant showed the highest increase in 'Shinzami' 30 days and in 'Sinhwangmi' 120 days after planting. Total weight, mean weight, and number of marketable tubers per plant were significantly higher 150 days after planting than that 120 days after planting. Marketable tuber yield at 120 days was high, over 2.5 ton/10a in 'Daeyumi', 'Dahomi', and 'Jeonmi', and was considerably increased, from 3.2 ton/10a to 3.5 ton/10a, 150 days after planting. Total weight of marketable tubers per plant and marketable tuber yield 120 and 150 days after planting had significant positive correlations with vine length and number of nodes 30 days after planting. Starch value was significantly higher 150 days after planting than that 120 days after planting. 'Daeyumi' and 'Jeonmi' had good growth vigor, high yield, and high starch content; 'Dahomi' also exhibited beneficial traits such as good growth vigor, high yield, and bright orange-colored flesh.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.80-86
• /
• 2020

In the fabrication process of inverted multi-tee (IMT) slabs, concrete has to be poured twice due to its shape, which is a huge disadvantage as a precast member. To overcome this, a new technique for manufacturing IMT slabs using a slipform method has been recently developed. In this study, flexural and shear tests were carried out to investigate the structural performances of inverted multi-tee (IMT) slabs manufactured using slipform method. To this end, one flexural specimen and two shear specimens with topping concrete were fabricated, and their failure modes and crack patterns, and the slips that occurred between the precast slab and topping concrete were measured and analyzed in detail. In addition, the flexural and shear strengths of the specimens were evaluated by utilizing the structural design code, and a shear strength estimation method, which is suitable for composite IMT slabs with different concrete properties, was proposed for practical design. The IMT slab satisfied the nominal flexural strength calculated by the current design code, and the proposed method provided a good estimation of the shear strength of the specimens.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.179-189
• /
• 2021

In this study, the research objects are gilt plated silver-iron nails excavated from the west of the tombs in Neungsan-ri, Buyeo. A gilt plated silver-iron nail was fabricated by combining silver and iron via heating and then gilding amalgam on top of this combination, demonstrating that this ancient artifact that can be replicated using current technology. Since the metal (Au, Ag) surface of these gilt plated artifacts are covered with iron oxide, which slips into the cracks and scratches of the artifacts as well, desalination is essential. Based on the results of the preliminary experiment, the research objects were classified into grades A, B, and C, according to the degree of corrosion and then desalinated using an alkali solution (NaOH, Sodium Sesquicarbonate of 0.1 M) at 60℃. The results demonstrate that the more serious is the degree of corrosion, the more is the amount of Cl^- detected. Further, more Cl^- was released when NaOH was used than when sodium sesquicarbonate was used, for all grades except Grade A. Furthermore, the more serious is the degree of corrosion, the longer is the desalination period and the reaction with NaOH for all grades except Grade A. A comparison of the Fe composition of the surface before and after desalination shows that Fe composition is the use of NaOH resulted in a smaller increase compared with the use of sodium sesquicarbonate, for all grades except Grade B. However, four of the nails were damaged owing to NaOH (Grade B 3ea, Grade C 1ea) during desalination. Thus, Cl^- ions are more stably released when sodium sesquicarbonate is used than when NaOH is used.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.71-76
• /
• 2012

Objectives : The purpose of this study was to evaluate the neuroprotective effect of Pueraria lobata extract on focal cerebral ischemia in mice. Methods : Focal cerebral ischemia was induced by occlusion of the right middle cerebral artery using the intraluminal filament model. ICR male mice underwent 90 minutes of middle cerebral artery occlusion (MCAo) followed by 24 hours of reperfusion. Mice were administered Pueraria lobata extract orally at the dose of 300mg/kg just prior to reperfusion. Rotarod test and balance beam test were practiced to assess sensory-motor function 23 hours after MCAo. In rotarod test, the latency to fall on the accelerating rotarod was recorded for 5 min. In balance beam test, the score was graded according to number of slips and latency to cross. The infarct volume was measured 24 hours after MCAo using 2% 2,3,5-triphenyltetrazolium chloride (TTC) staining. Results : Pueraria lobata extract treated group showed significant reduction in infarct volume by 27.3% compared to control group (p<0.05). In rotatod test, it also showed significant extension of latency time compared to control group ($67.82{\pm}15.08$ vs. $5.62{\pm}1.06$, p<0.001). In contrast to performance in rotarod test, that in balance beam test did not improve with Pueraria lobata extract treatment. Conclusions : We conclude that Pueraria lobata extract has a significant neuroprotective effect and reduces damage of sensory-motor function in MCAo model. These findings suggest that Pueraria lobata could be a potent neuroprotective agent.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.