• Investigative Magnetic Resonance Imaging
• /
• v.23 no.4
• /
• pp.341-350
• /
• 2019

Purpose: To determine the MR parameters affecting India ink artifacts on opposed-phase chemical shift magnetic resonance (MR) imaging. Materials and Methods: The use of a female Sprague-Dawley rat was approved by our Institutional Animal Care and Use Committee. Using an iterative decomposition of water and fat with echo asymmetry and least-squares estimation (IDEAL) images, which is a modified Dixon method, axial opposed-phase images of the abdominal cavity were obtained with different MR parameters: series 1, different repetition times (TRs; 400, 2000, and 4000 ms); series 2, different echo times (TEs; 10, 50, and 100 ms); series 3, different field of views (FOVs; 6, 8, 16, and 24 cm); series 4, different echo train lengths (ETLs; 2, 4, and 8); series 5, different bandwidths (25, 50, and 85); and series 6, different slice thicknesses (1, 2, 4, 8, and 16 mm). Artifacts on opposed images obtained with different parameters were compared subjectively by two radiologists. For objective analysis, the thickness of the artifact was measured. Spearman's correlation between altered MR parameters and thicknesses of India ink artifact was obtained via objective analysis. Results: India ink artifact was increasingly apparent using shorter TE, larger FOV and ETL, and thicker slices upon subjective analysis. The objective analysis revealed a strong negative correlation between the thickness of the artifact and TE (r = -0.870, P < 0.01); however, strong positive correlations were found between FOV (r = 0.854, P < 0.01) and slice thickness (r = 0.971, P < 0.01). Conclusion: India ink artifact was thicker with shorter TE, larger FOV, and larger slice thickness.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.1
• /
• pp.1-8
• /
• 1999

In order to study the implantation mechanism various methods for culture of endometrial cells in vitro have been attempted. However, a disadvantage is that primary cultures of stromal and epithelial cells do not have the ability to differentiate, and therefore cannot be reproduced in the same manner as in vivo endometrium. The object of this study is to establish a three dimensional culture of endometrial cells which are both morphologically and functionally identical to in vivo endometrium. Endometrial tissues obtained after hysterectomies were cut into thin slices and treated with collagenase and trypsin-EDTA. The stromal cells and the epithelial cells were separated by centrifugation and cultured for 24 hours in DMEM media containing 10% FCS, 100 nM progesterone, and 1 nM estradiol. The cultured stromal cells were mixed with collagen gel and solidified, after which it was covered with matrigel. Epithelial cells were inoculated on the top and then cultured for 3 days. The three dimensionally cultured endometrial cells were stained for integrin ${\alpha}1,\;{\alpha}4,\;{\beta}3$, and cyclooxygenase-l, -2 by immunohistochemistry, which all showed strong expression. The cultured epithelial cells showed the formation of microvilli, tight junctions and pinopodes by electron microscopy. Studies are currently under way utilizing this three dimensional culture model to ascertain the interaction between the embryo and human endometrial cells at the time of implantation, and it is thought that further studies into a new culture environment which would allow longer periods of culture will be necessary.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.37-43
• /
• 2009

Streaming video service over wireless and mobile communication networks has received significant interests from both academia and industry recently. Specifically, mobile WiMAX (IEEE 802.16e) is capable of providing high data rate and flexible Quality of Service (QoS) mechanisms, supporting mobile streaming very attractive. However, we need to note that streaming videos can be partially deteriorated in their macroblocks and/or slices owing to errors on OFDMA subcarriers, as we consider that compressed video sequence is generally sensitive to the error-prone channel status of the wireless and mobile network. In this paper, we introduce an OFDMA subcarrier-adaptive mobile streaming server based on cross-layer design. This streaming server system is substantially efficient to reduce the deterioration of streaming video transferred on the subcarriers of low power strength without any modifications of the existing schedulers, packet ordering/reassembly, and subcarrier allocation strategies in the base station.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.126-132
• /
• 2013

PURPOSE. Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the effect of different surface conditioning on tensile bond strength (TBS) of a glass fiber reinforced post to resin cement. MATERIALS AND METHODS. In this in vitro study, 40 extracted single canal central incisors were endodontically treated and post spaces were prepared. The teeth were divided into four groups according to the methods of post surface treatment (n=10): 1) Silanization after etching with 20% $H_2O_2$, 2) Silanization after airborne-particle abrasion, 3) Silanization, and 4) No conditioning (Control). Adhesive resin cement (Panavia F 2.0) was used for cementation of the fiber posts to the root canal dentin. Three slices of 3 mm thick were obtained from each root. A universal testing machine was used with a cross-head speed of 1 mm/minute for performing the push-out tests. Two-way ANOVA and Tukey post hoc tests were used for analyzing data (${\alpha}$=0.05). RESULTS. It is revealed that different surface treatments and root dentin regions had significant effects on TBS, but the interaction between surface treatments and root canal regions had no significant effect on TBS. There was significant difference among $H_2O_2$ + Silane Group and other three groups. CONCLUSION. There were significant differences among the mean TBS values of different surface treatments. Application of hydrogen peroxide before silanization increased the bond strength between resin cements and fiber posts. The mean TBS mean values was significantly greater in the coronal region of root canal than the middle and apical thirds.

• Journal of Ginseng Research
• /
• v.41 no.1
• /
• pp.85-95
• /
• 2017

Background: American ginseng (Panax quinquefolius L.) and Asian ginseng (Panax ginseng Meyer) products, such as slices, have a similar appearance, but they have significantly different prices, leading to widespread adulteration in the commercial market. Their aroma characteristics are attracting increasing attention and are supposed to be effective and nondestructive markers to determine adulteration. Methods: The aroma characteristics of American and Asian ginseng were investigated using gas chromatography-mass spectrometry(GC-MS) and an electronic nose (E-nose). Their volatile organic compounds were separated, classified, compared, and analyzed with different pattern recognition. Results: The E-nose showed a good performance in grouping with a principle component analysis explaining 94.45% of variance. A total of 69 aroma components were identified by GC-MS, with 35.6% common components and 64.6% special ingredients between the two ginsengs. It was observed that the components and the number of terpenes and alcohols were markedly different, indicating possible reasons for their difference. The results of pattern recognition confirmed that the E-nose processing result is similar to that of GC-MS. The interrelation between aroma constituents and sensors indicated that special sensors were highly related to some terpenes and alcohols. Accordingly, the contents of selected constituents were accurately predicted by corresponding sensors with most $R^2$ reaching 90%. Conclusion: Combined with advanced chemometrics, the E-nose is capable of discriminating between American and Asian ginseng in both qualitative and quantitative angles, presenting an accurate, rapid, and nondestructive reference approach.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.293-297
• /
• 2015

Focused ion beam (FIB) technique is widely used in the precise preparation of thin slices for the transmission electron microscopic (TEM) observation of target area of the minerals and geological materials. However, structural damages and artifacts by the Ga ion beam as well as electron beam damage are major difficulties in the TEM analyses. TEM analyses of the mineral samples showed the amorphization of quartz and feldspar, curtain effect, and Ga contamination, particularly near the grain edges and relatively thin regions. Although the ion beam damage could be much reduced by the improved procedures including the adjustment of the acceleration voltage and current, the ion beam damage and contamination are likely inevitable, thus requiring careful interpretation of the micro-structural and micro-chemical features observed by TEM analyses.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.225-231
• /
• 2000

The Delaunay triangulation. which is one of the surface rendering methods. have been evaluated as a good algorithm which can solve the geometrical connection problems and make high quality images. However this method also have the problem that is the 'non-solid' connection between slices. In this paper, we proposed a new method for the Delaunay triangulation for the surface rendering from 2D medical images in the PC environment. The proposed method was designed to eliminate 'non-solid' tetrahedra. which had no correspondence to the geometric closeness, and used elimination algorithm with modified External Voronoi Skeleton path. This method enabled us to eliminate 'non-solid' tetrahedra without affecting other regions. Thus we could effectively reconstruct the complex shaped objects which were compactly connected with tetrahedra.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.223-231
• /
• 1997

In this paper, an interframe coding method for volumetric medical images is proposed. By treating interslice variations as the motion of bones or tissues, we use the motion compensation (MC) technique to predict the current frame from the previous frame. Instead of a block matching algorithm (BMA), which is the most common motion estimation (ME) algorithm in video coding, image warping with biolinear transformation has been suggested to predict complex interslice object variation in medical images. When an object disappears between slices, however, warping prediction has poor performance. In order to overcome this drawback, an overlapped block motion compensation (OBMC) technique is combined with carping prediction. Motion compensated residual images are then encoded by using an embedded zerotree wavelet (EZW) coder with small modification for consistent quality of reconstructed images. The experimental results show that the interframe coding suing warping prediction provides better performance compared with interframe coding, and the OBMC scheme gives some additional improvement over the warping-only MC method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1015-1022
• /
• 2012

This paper deals with hardware design which unifies MD5 and HAS-160 hash algorithms. Two algorithms get a message with arbitrary length and process message blocks divided into 512 bits each time and output a hash code with a fixed length. MD5 ouputs a hash code of 128 bits and HAS-160 a hash code of 160 bits. The unified hash core designed has 32% of slices overhead compared to HAS-160 core. However, there is only a fixed message buffer space used. The unified hash core which run a step in one clock cycle operates at 92MHz and has performance which digests a message in the speed of 724Mbps at MD5 and 581Mbps at HAS-160 hash mode. The unified hash core which is designed can be applicable to the areas such as E-commerce, data integrity and digital signature.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.87-94
• /
• 2017

Objectives: Chitosan has been widely investigated and used. However, the literature does not refer to the shelf life of this solution. This study evaluated, through the colorimetric titration technique and an analysis of dentin micro-hardness, the shelf life of 0.2% chitosan solution. Materials and Methods: Thirty human canines were sectioned, and specimens were obtained from the second and third slices, from cemento-enamel junction to the apex. A 0.2% chitosan solution was prepared and distributed in 3 identical glass bottles (v1, v2, and v3) and 3 plastic bottles (p1, p2, and p3). At 0, 7, 15, 30, 45, 60, 90, 120, 150, and 180 days, the specimens were immersed in each solution for 5 minutes (n = 3 each). The chelating effect of the solution was assessed by micro-hardness and colorimetric analysis of the dentin specimens. 17% EDTA and distilled water were used as controls. Data were analyzed statistically by two-way and Tukey-Kramer multiple comparison (${\alpha}=0.05$). Results: There was no statistically significant difference among the solutions with respect to the study time (p = 0.113) and micro-hardness/time interaction (p = 0.329). Chitosan solutions and EDTA reduced the micro-hardness in a similar manner and differed significantly from the control group (p < 0.001). Chitosan solutions chelated calcium ions throughout the entire experiment. Conclusions: Regardless of the storage form, chitosan demonstrates a chelating property for a minimum period of 6 months.