• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.6
• /
• pp.809-816
• /
• 1997

The present study was designed to investigate whether endogenous nitric oxide(EDNO) is involved in submandibular vasodilation and salivation induced by parasympathetic nerve stimulation. Effects of $N^w$-nitro-L-arginine-methyl ester (L-NAME) which blocks the synthesis of EDNO from L-arginine on the submandibular vasodilation and salivation induced by chords stimulation or administration of various vasodilators were examined in anesthetized cats. Effect of L-NAME on $K^+$ efflux induced by carbachol was also examined using the excised submandibular slice in vitro. In the submandibular slices, acetylcholine$(10^{-5}\;mol/L)$ or vasoactive intestinal polypeptide$(VIP,\;10^{-5}\;mol/L)$ increased $NO_2$ contents, which was Prevented by pretreatment with L-NAME. Salivary secretion in response to the chords stimulation$(3\;V,\;1\;msec,\;10{\sim}20\;Hz)$ was completely blocked by treatment with atropine(1 mg/kg). Increased blood flow response to the low frequency(1, 2, 5 Hz) stimulation was significantly reduced, whereas the blood flow induced by the higher frequency(10,20 Hz) stimulation was not affected. Lingual-arterial infusion of L-NAME(100 mg/kg) significantly diminished the vasodilatory and salivary responses to the chorda stimulation at all stimuli frequencies used. Intra-arterial infusion of L-NAME(100 mg/kg markedly diminished the vasodilatory responses to acetylcholine$(5\;{\mu}g/kg)$, VIP$(5\;{\mu}g/kg)$ or bradykinin$(5\;{\mu}g/kg)$. In the excised submandibular slice, $K^+$ efflux in response to carbachol$(10^{-5}\;mol/L)$ was significantly decrease by pretreatment with L-NAME$(10^{-5}\;mol/L)$. In the isolated submandibular artery precontracted with phenylephrine$(10^{-5}\;mol/L)$, the vasorelaxation induced by ACh$(10^{-7}\;mol/L)$ was reversed into a contraction by methylene blue$(10^{-4}\;mol/L)$. These results suggest that EDNO may play an important role in vasodilation and secretion of the submandibular gland.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.29-36
• /
• 2005

This paper presents the first hardware design of ARIA that KSA(Korea Standards Association) decided as the block encryption standard at Dec. 2004. The ARIA cryptographic algorithm has an efficient involution SPN (Substitution Permutation Network) and is immune to known attacks. The proposed ARIA design based on 1 cycle/round include a dual port ROM to reduce a size of circuit md a high speed round key generator with barrel rotator. ARIA design proposed is implemented with Xilinx VirtexE-1600 FPGA. Throughput is 437 Mbps using 1,491 slices and 16 RAM blocks. To demonstrate the ARIA system operation, we developed a security system cyphering video data of communication though Internet. ARIA addresses applications with high-throughput like data storage and internet security protocol (IPSec and TLS) as well as IC cards.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.209-216
• /
• 1995

Recently, a new tailored RF gradient echo (TRFGE) sequence was reported. This technique not only enhances the magnetic susceptibility effect but also allows us to measure local changes in brain oxygenation. In this study, a phantom and cat brain experiments were performed on a 4.7 Tesla BIQSPEC (BRUKER) instrument with a 26 cm gradient system. We have demonstrated that the signal intensity (SI) of the TRFGE sequence varies according to the concentration of susceptibility contrast agent. Three capillary tubes with different concentrations of Gd-DTPA (0.01, 0.05, 0.1 mMOI/l) were placed at the middle of a cylindrical water phantom. Using both TRFGE and conventional gradient echo (CGE) sequences, phantom images of the slices which contain all three tubes were obtained. For the animal experiment, cats were anesthetized and ventilated using halotane (0.5%) and a $N_2O/ O_2$ mixture (2:1), and blood pressure and heart rate were monitored and kept normal. For the observation of tue first pass of Gd- DTPA, imaging was started at t = 0. At t = 8 ~ 12s, 0.2 mMol/Kg Gd-DTPA was manually injected in the femoral vein. The imaging parameters were TRITE = 25/10 msec, flip angle = $30^{\circ}$, FOV = 10cm, image matrix size = $128{\times}128$ with 64 phase encodings and the image data acquisition window was 10 msec. SI-time curves were then obtained from a series of 30 images which were collected at 2 sec intervals using both CGE and TRFGE pulse sequences before, during, and following the contrast injection.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.223-230
• /
• 1995

This study investigates a combined mathematical model for the quantitative estimation of regional myocardial blood flow in experimental canine coronary artery occlusion and in patients with ischemic myocardial diseases using Rb-82 dynamic myocardial positron emission tomography. The coronary thrombosis was induced using the new catheter technique by narrowing the lumen of coronary vessel gradually, which finally led to partial obstruction of coronary artery. Thirty four Rb-82 dynamic myocardial PET scans were performed sequentially for each experiment using our 5, 10 and 20 second acquisition protocol, respectively, and six to seven regions of interest were drawn on each transaxial slices, one on left ventricular chamber for input function and the others on normal and decreased perfusion myocardial segments for the flow estimation in those regions. Two compartment model and graphical analysis method have been applied to the measured sets of regional PET data, and the rate constants of influx to myocardial tissue were calculated for regional myocardial flow estimates with the two parameter fits of raw data by the Levenberg-Marquardt method. The results showed that, (I) two compartment model suggested by Kety-Schmidt, with proper modification of the measured data and volume of distribution, could be used for the simple estimation of regional myocardial blood flow, (2) the calculated regional myocardial blood flow estimates were dependent on the selection of input function, which reflected partial volume effect and left ventricular wall motion in previously used graphical analysis, and (3) mathematically fitted input and tissue time activity curves were more suitable than the direct application of the measured data in terms of convergence.

• The Journal of Korean Academy of Prosthodontics
• /
• v.26 no.1
• /
• pp.153-169
• /
• 1988

There is a little scientific documentation reporting the stress, distribution to the edentulous mandible by different concepts of occlusal scheme. So, this study was to investigate the hypothesis that the magnitude and distribution of the occlusal stresses, transmitted through a mandibular complete denture base to the edentulous mandible, would be influenced by the lingualized occlusion. This investigation was performed to analyze the stresses induced in a three-dimensional photoelastic edentulous mandible, when a load is applied to the denture arranged into lingualized occlusion in centric relation, lateral and protrusive functional position. The mounted denture on a Dentatus Type ARO articulator was loaded in a pure vertical direction with 15kgs on the center of articulator in each case and the stresses were frozen into epoxy edentulous model at $127^{\circ}C$ in the stress freezing furnace. The stress-frozen epoxy models were sliced with diamond disc saw into 4mm thick. The slices were examined with a circular polariscope. The results were as follows: 1. In centric relation, the stresses were low at anteriors, and gradually increase to the premolar, molar area and highest at the first molar and gradually decrease from the second molar and lowest at the retromolar pad region. The lingual side showed higher stresses than labiobuccal side. 2. In lateral functional position, the working side showed higher stresses than the balancing side. In working side, the lingual side showed higher stresses than the buccal side and in balancing side, the buccal side showed higher stresses than the lingual side. 3. In protrusive position, stress distribution was symmetrical on the posteriors and the stresses were concentrated at the labial side of the anteriors.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.101-109
• /
• 2016

PURPOSE. To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (${\mu}CT$) and regional push-out bonding strength. MATERIALS AND METHODS. Twenty-one, single and round shaped roots were enlarged with a low-speed drill following by endodontic treatment. The roots were divided into three groups (n=7) and fiber posts were cemented with Maxcem Elite, Multilink N and Superbond C&B resin cements. Specimens were scanned using ${\mu}CT$ scanner at resolution of $13.7{\mu}m$. The number, area, and volume of voids between dentin and post were evaluated. A method of analysis based on the post segmentation was used, and coronal, middle and apical thirds considered separately. After the ${\mu}CT$ analysis, roots were embedded in epoxy resin and sectioned into 2 mm thick slices (63 sections in total). Push-out testing was performed with universal testing device at 0.5 mm/min cross-head speed. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Overall, significant differences between the resin cements and the post level were observed in the void number, area, and volume (P<.05). Super-Bond C&B showed the most void formation ($44.86{\pm}22.71$). Multilink N showed the least void surface ($3.51{\pm}2.24mm^2$) and volume ($0.01{\pm}0.01mm^3$). Regional push-out bond strength of the cements was not different (P>.05). CONCLUSION. ${\mu}CT$ proved to be a powerful non-destructive 3D analysis tool for visualizing the void parameters. Multilink N had the lowest void parameters. When efficiency of all cements was evaluated, direct relationship between the post region and push-out bonding strength was not observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.625-633
• /
• 1996

Crude extracts of 4 Allium SPP. such as welsh onion, onion, chinese chives and garlic were purified by paper chromatography and these activities were bio-assayed with rice seedlings. The stem and leaf slices of Allium spp. were treated and rice seedlings were planted in the soil to know the effect of its application on rice growth. The weak acidic fraction of Allium SPP. enhanced the growth and rooting of rice seedlings and had greater activity in promoting than in inhibiting the growth on rice seedling. Elongation of the second leaf sheath of the rice seedlings were not influenced by the extracts of Allium SPP. The stem and leaf application 10 days before transplanting, increased the number of effective tiller remarkably. Especially, the application of 50~400g welsh onion and 50~200g onions increased the number of spikelets per panicle compared to standard fertilization. But, in application of larger amounts, the-death rate of the rice seedlings after transplanting was higher in the stem and leaf application 10 days before transplanting than the one applied on the transplanting day. In particular, treatments of chinese chives and garlic showed higher death rate than those of welsh onion or onion. The stem and leaf application of Allium SPP. resulted in high yield than standard fertilization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1155-1158
• /
• 2005

Micro-stereolithography is a newly proposed technology as a means that can fabricate a 3D micro structure of free form. It makes a 3D micro-structure by dividing the shape into many slices of relevant thickness along horizontal surfaces, hardening each layer of slice with a focused laser beam, and stacking them up to a desired shape. However, we do not anticipate the electric conductivity of the final product at the existing micro-stereolithography. The reason is that this technology uses polymer to make the product. Thus the new suspension which was mixed conventional photopolymer with metal powder was developed in this study. The developed suspensions were based on SL5180 which is commercialized resin and IMS03 that is made in our laboratory. And Triton X-100 was added at the suspension for getting the scattering effect and stabilizing effect. The layer recoating device was developed to be flat the mixed high viscosity suspension. A 3D micro structure was manufactured by using recoating system and micro-stereolithography system. The fabricated product was sintered to get the electric conductivity. After sintering, a pure copper product was made. In this study, new process was developed by making metal micro structure having an electric conductivity. This technology broadened the realm of the micro-stereolithography technology. And it will be applied to make the 3D micro structure of free form which has a high hardness and an electric conductivity in the near future.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.180-186
• /
• 1999

Eugenol has been reported to reduce odontogenic pain and is known to have a structure similar to capsaicin, a potent stimulant of certain nociceptors. We have hypothesized that the analgesic effect of eugenol may be due, in part, to inhibition of capsaicin-sensitive nociceptors. To test this hypothesis, we evaluate whether eugenol inhibits capsaicin-sensitive release of immunoreactive calcitonin generated peptide(iCGRP) from bovine dental pulp. Freshly extracted bovine incisors were transported to the lab. on ice, Spilitted and pulp tissue was removed. The tissue was chopped into 200${\mu}m$ slices. Dental pulp was superfused(340 ${\mu}l/min$) in vitro with oxygenated Kreb's buffer. Eugenol and vehicle(0.02% 2-hydroxyl-${\beta}$-cyclodextrin) were administered prior to stimulation of pulp with capsaicin and iCGRP was measured by RIA. The results were as follows: 1. Administration of eugenol has no effect on basal release of iCGRP. 2. In the vehicle treated group, capsaicin evoked a 2.5-fold increase over basal iCGRP levels. 3. Administration of eugenol(600 ${\mu}M$) reduced capsaicin evoked release of iCGRP by more than 40%(153.4${\pm}$41.1% vs 258.9${\pm}$21.7%). 4. 2-hydroxylpropyl-${\beta}$-cyclodextrin of less than 0.02% is found to be an effective vehicle to dissolve eugenol without evoking iCGRP release from dental bovine pulp. These data indicate that eugenol inhibits pulpal capsaicin-sensitive fibers and suggest that intracanal medicament of eugenol may relieve pain, in part, by this mechanism.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.175-175
• /
• 1996

The spinal dorsal horn is the area where primary afferent fibers terminate and cutaneous sensory information is Processed. A number of putative neurotransmitter substances, including excitatory and inhibitory amino acids and peptides, are present in this region and sites and cellular mechanisms of their actions have been a target of numerous studies. In this study, single neurons were acutely isolated and the properties of whole cell current and responses to excitatory and inhibitory neurotransmitters were studied by the patch clamp method. Young rats (7-14 days) were anesthetized with diethyl-ether, and the lumbar spinal cord was excised and cut transversely at a thickness of 30$\mu\textrm{m}$ by Vibroslicer. The treatment of spinal slices with low concentration of proteases (pronase and thermolysin 0.75 mg/$m\ell$) and mechanical dissociation yielded isolated neurons with near intact morphology. Multipolar, ellipsoidal and bipolar, and pyramidal cells were shown. By applying step voltage pulses to neurons held at -70 mV, two types of inward currents and one outward currents observed. The fast activating and inactivating inward current was the Na$\^$+/ current because of its fast kinetics and blocking by 0.5${\mu}$M TTX, a specific blocker of Na$\^$+/ channel. The second type of inward currents were sustained. Based on their kinetics and current-voltage relations, it was likely that the second type of inward current was the voltage-dependent Ca$\^$2+/ current. In the presence of TTX, the steady-state currents mainly represented outward K$\^$+/ current which looked like the delayed rectifier K$\^$+/ current. In addition, the membrane currents produced by agonist of excitatory amino acid (EAA) receptor and the endogenous transmitter candidate L-glutamate were recorded in isolated whole-cell voltage clamped neurons as well as responses to inhibitory amino acids (${\gamma}$-amino butyric acid, glycine). Drugs were applied by a method that allows complete exchange of the solution within 1 sec; an infinite number of solutions can be applied to a single cell.