• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.330-334
• /
• 2009

Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.

• Journal of Chest Surgery
• /
• 제50권4호
• /
• pp.300-304
• /
• 2017

A 42-year-old man was diagnosed with cancer of the right lower lung lobe with a posteparterial type of tracheal bronchus, in which the posterior segmental bronchus of the right upper lobe arose from the distal bronchus intermedius. A mass involved the distal bronchus intermedius, requiring a right lower bilobectomy with an additional posterior segmental resection of the right upper lung lobe. Thus, we performed a right lower bilobectomy and sleeve anastomosis of the posterior segmental bronchus of the right upper lobe to the proximal bronchus intermedius, sparing the pulmonary parenchyma of the same lobe.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• 대한가정학회지
• /
• 제41권7호
• /
• pp.185-200
• /
• 2003

The purpose of this study was to investigate the fitness using the draft method to develop moderate-stretch knit block pattern for young women in Korea. The subjects were three women within the range of the ages from 18 to 24 showing the average body figures. In this study, 4 different patterns were drafted for the moderate stretch knitted fabrics, that were categorised into two different types. The first type of these was made up for kilted fabrics and the other was initially drafted for woven fabrics and altered for knitted materials afterward. The major findings derived from this investigation were as follows; 1. According to each sensory evaluation for the appearance test on fitness, knit block patterns A and D were the better than the rest of them. 2. Knit block patterns A and D with higher evaluation scores were drafted with body size measurements except the waist line, whereas patterns B and C with relatively lower scores were produced including the smaller ease amounts than the woven block pattern. 3. To see the results of the functional test based on the designed ten motions for this experiment, knit block patterns A and B were concluded as better than the rest of them. In addition, concerning the arm liking motions, pattern B was scored as the best among the developed patterns.

• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.656-664
• /
• 2019

This study was to develop the patterns based on the study of commercial Cheollik dress pattern analysis that verify the effects of pattern improvement by performing wearing evaluations. The commercial Cheollik dress pattern analysis was divided into A type composed of a traditional hanbok flat sleeve type and B type composed of western three-dimensional sleeves type. The prototype pattern of A type and prototype pattern of B type were fabricated after modifying and supplementing the pattern on the basis of precedent research. Appearance evaluations and mobility evaluations were also conducted. In the evaluations of the appearance, the prototype pattern in both A type and B type rated better than the control pattern in all items, so it can be judged to be a pattern that creates a better appearance in terms of allowance and design ratio. In the evaluations of the mobility, the prototype pattern was more convenient and a functional pattern with better scores in both A type and B type. If the Cheollik dress prototype patterns developed in this study are distributed, the Cheollik dress will be easy and comfortable to wear as a casual wear, which will help to make dailyization and popularization of Hanbok.

• 상하수도학회지
• /
• 제26권2호
• /
• pp.257-264
• /
• 2012

The concept of a non-contact type of UV disinfection system was introduced in this study. UV lamps and their quartz sleeves hang over the water surface and there is no interface between the sleeve and water. Obviously, there is no fouling. Based on optical laws and other UV distribution models, a detail mathematical model for a non-contact type UV disinfection system was developed in this study. Pathway length of UV light in a non-contact type photoreactor is longer than that in a submerged type photoreactor because the light is more refractive while passing through 3 interfaces of medium. But the pathway length passing through the water media is not significantly longer than that in a submerged type photoreactor so, the absorption of UV light by water is not significantly different from the other system. Due to the reflection effect, UV intensity is rapidly decreased as the horizontal distance from the light source is increased. The reflective attenuation in a non-contact type photoreactor is higher than that in a submerged type photoreactor. These mean that the short photoreactor is advantageous than the narrow-long photoreactor for the non-contact type photoreactor in an optical point of view.

• 복식
• /
• 제34권
• /
• pp.5-17
• /
• 1997

The porpose of this study was to know what kinds of clothes the elderly women preferred to wear according to their ages and body type and to pro-vide basic data for clothing design of the elderly women. Anthropometric analysis and questionnaire study wear done on 230 elderly women over sixty years, For analysis of the data One-way ANOVA and Chi-square were employed. The results of this study were as fol-lows: 1) The elderly women have a prefer-ance fore 'Front openning style' and 'Two-opiece style' which are easy to wear and prefer skirts to pants. 2) Their preference for clothes is de-pendent on their age rather than their body type. 3) The age is the decisive factor on blouse collar design neckline style sleeve ending skirt length location of zippe and waist band style when the select the clothes. 4) The body type is the decisive fa-ctor on jacket style skirt length and waist band style.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• 한국의류학회지
• /
• 제24권4호
• /
• pp.521-529
• /
• 2000

This paper proposed the sizing system for women's upper clothes in order to improve clothing fitness and raise the productivity. The sizing system was classified according to 5 body types and 5 age groups. The size intervals of the basic dimensions were established at regular intervals centering around their means. The size interval of stature was 8cm centering around 158cm and that of bust girth 4cm centering around 84cm and that of hip girth 4cm centering around 92cm. Frequency distribution on the size of upper clothes showed that the most frequent size were 96-96-150 in the longest-fattest type, 88-96-158 in the long-fatter type, 84-92-158 in the medium length-fat type, 84-92-166 in the Short-balanced type, and 76-88-158 and 80-88-158 in the medium length-balanced type. The number of the sizes of upper clothes, which had frequencies more than 5%, was 32 and each size was presented with waist girth, back waist length and sleeve length. The size system classified by age group had 22 cases in the early twenties, 15 cases in the late twenties, 21 cases in the early thirties, 19 cases in the late thirties, and 15 cases in the forties.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.734-742
• /
• 2011

This study has been undertaken as a basic research for automatic pattern design for baseball uniforms manufactured under custom-MTM system, propose building up of a system whereby various partial patterns are combined under an automatic design system and develop a multi-combination type pattern searching algorithm which allows development of a various designs. As a result of this, type classification based on pattern design elements includes side, open, collar, facing and panel type. Design have been divided into coarse classification ranging from level 1 to 7 according to pattern design elements, based on a design distribution chart. Out of 7 such levels, 3 major types determining design which are, more specifically, level 1 sleeve type, level 2 open type and level 3 collar type, have been taken and combined to determine a total of 12 types to be used for design classification codes. Respective name of style and patterns have been coded using alphabet and numerals. Totally, pattern searching algorithm of multi-combination type has been developed whereby combination of patterns belonging to a specific style can be retrieved automatically once that style name is designated on the automatic pattern design system.