• Journal of Acupuncture Research
• /
• v.19 no.4
• /
• pp.140-151
• /
• 2002

This study was carried to identify whether acupuncture at several meridian points can affect the human anesthesia or not through the analysis of serum intermediates, such as, melatonin, serotonin, TSH, cortisol in human serum. We investigated the effect of accupuncture on the change of serum intermediates which have frequently been made a subject of discussion owing to its hyponic and sedative properties in practice. The result obtained were as follow ; 1. Serum melatonin levels was hardly affected at 40 minutes after general acupuncture on Hab-Gog, Nae-Gwan, and the other meridian points as compared with that($5.64{\pm}1.02pg/ml$) of resting control group. But on day 1 after acupuncture, these tend to increase significantly ($7.95{\pm}2.05pg/ml$ to $8.21{\pm}1.57pg/ml$, p <0.05). On the other hand, control group under sleep showed the serum level of $7.39{\pm}1.03pg/ml$. Additional acupuncture at In-Dang induced the increased melatonin level, especially at 40minutes after acupuncture(p <0.05). 2. Serotonin level in resting control serum recorded $51.14{\pm}8.17{\mu}g/ml$. Acupuncture at determined meridian point intend to increase average level of serotonin, but not significant. However observation on day 1 after acupuncture at Hab-Gwan meridian point and under sleeping showed the significantly increased serotonin level, $74.05{\pm}35.83{\mu}g/ml$, $70.44{\pm}13.08{\mu}g/ml$, respectively. 3. TSH level in intact human serum recorded $0.85{\pm}0.24{\mu}IU/ml$. and the serum exposed to acupuncture showed the irregular pattern of TSH level in a mean range of $0.76{\pm}0.44{\mu}IU/ml$ to $1.06{\pm}0.38{\mu}IU/ml$, regardless of meridian point or time after acupuncture. 4. The values of serum cortisol in control group were $11.76{\pm}2.06{\mu}g/dl$ in resting, $7.51{\pm}2.85{\mu}/dl$ under sleep, respectively. The level of serum cortisol in 40minutes after acupuncture was markedly (p <0.05) reduced to the serum levels of $5.65{\pm}2.58{\mu}g/dl$ (Hab-Gog, Nae-Gwan), $7.58{\pm}3.21{\mu}g/dl$ (Gyo-Gam, Sin-Mun besides Hab-Gog, Nae-Gwan), $6.43{\pm}3.54{\mu}g/dl$ (In-Dang besides to Hab-Gog, Nae-Gwan), respectively, as compared with control, intending to increase a little on day 1 after acupuncture. From the above results, the analysis of serum intermediates suggest that acupunctuation at meridian points applied to at this study act upon the phase of light anaesthesia or hypnosis, at the same time affect pituitary-adrenal axis rather than hypothalamus-pituitary axis in the secretary system of hormone and also don't affect dorsal-raphe nucleus according to the observation of change transition in serum intermediates, such as TSH, serotonin, and cortisol.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.367-379
• /
• 1994

This paper describes scheduling algorithms of the UNIX operating system and shows an analytical approach to approximate the average conditional response time for a process in the UNIX operating system. The average conditional response time is the average time between the submittal of a process requiring a certain amount of the CPU time and the completion of the process. The process scheduling algorithms in thr UNIX system are based on the priority service disciplines. That is, the behavior of a process is governed by the UNIX process schuduling algorithms that (ⅰ) the time-shared computer usage is obtained by allotting each request a quantum until it completes its required CPU time, (ⅱ) the nonpreemptive switching in system mode and the preemptive switching in user mode are applied to determine the quantum, (ⅲ) the first-come-first-serve discipline is applied within the same priority level, and (ⅳ) after completing an allotted quantum the process is placed at the end of either the runnable queue corresponding to its priority or the disk queue where it sleeps. These process scheduling algorithms create the round-robin effect in user mode. Using the round-robin effect and the preemptive switching, we approximate a process delay in user mode. Using the nonpreemptive switching, we approximate a process delay in system mode. We also consider a process delay due to the disk input and output operations. The average conditional response time is then obtained by approximating the total process delay. The results show an excellent response time for the processes requiring system time at the expense of the processes requiring user time.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.167-176
• /
• 2009

Traditional cluster-based routing method is a representative method for increasing the energy efficiencies. In these cluster-based routing methods, the selected cluster head collect/aggregate the information and send the aggregated information to the base station. But they have to solve the unnecessary energy dissipation of frequent information exchange between the cluster head and whole member nodes in cluster. In this paper, we minimize the frequency of the information exchange for reducing the unnecessary transmit/receive frequencies as calculate the overlapped area or number of overlapped member nodes between the selected cluster head and previous cluster head in the setup phase. So, we propose the modified cluster selection protocol method that optimizes the energy dissipation in the setup phase and reuses the saved energy in the steady-state phase efficiently that prolongs the whole wireless sensor network lifetime by uniformly selecting the cluster head.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.1-6
• /
• 2014

The IoT (Internet of Things) is considered as a core technology to realize interconnected world. At this, companies composing ICT industry and standard organizations make efforts to accelerate it. IETF CoRE(Constrained RESTful Environment) working group standardized CoAP (Constrained Application Protocol) for the constrained device. CoAP has RESTful architecture and CoAP option is provided to use forward-proxy. The forward-proxy is used to translate protocol and perform requests on behalf of the client. However, communication between Internet based client and LLN(Low-power and Lossy Network) based CoAP server architecture has limitations to deploy real IoT service. In this architecture, problems like response delay, URI assignment and DoS attack can be occurred. To solve these problems, we propose the reverse-proxy based system. We consider both of static IoT and mobility IoT environments. Finally, our proposed system is expected to provide efficient IoT service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.187-192
• /
• 2017

In dense deployments of sensor nodes in Wireless Sensor Networks, the MAC protocol has challenges to solve problems such as reducing delivery delay and reducing energy consumption. To solve these problems lots of protocols are suggested. This paper proposed a sensor nodes' residual energy based wake-up control mechanism, in which each node decides whether it wakes up or stays in sleep mode to save energy consumption by reducing unnecessary idle listening. The main idea of the wake-up control mechanism is to save node's energy consumption. The proposed wake-up control mechanism is based on the RI-MAC protocol, which is one of the receiver-initiated MAC protocols. A receiver node in the proposed mechanism periodically wakes up and broadcasts a beacon signal based on the energy status of the node. A receiver node also adjusts wake-up period based on the traffics. Results have shown that the proposed MAC protocol outperformed RI-MAC protocol in the terms of energy consumption.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.329-334
• /
• 2004

The objective of this study regards the preceding condition of the construction disposal of waste which is appropriate, with occurrence quantity DB anger the occurrence quantity prediction which is accurate the regression model which it sees and with the method which is mote accurate prediction method of existing than to sleep it presents it does. This study acquires apartment results data of public construction and civil construction, and chose factor that exert biggest influence on the waste occurrence amount through question and interview memorial address by regression model variable. And presented regression mode] which uses statistics program named SPSS. Result of this study by regression model through constant results data DB anger existent error big experience than estimate method that corrector estimation is available show.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.335-343
• /
• 2006

We have designed the system that measure one channel ECG by two electrode and extract real-time EDR with more related resipiration and comportable to subject by using conductive textile. On the assumption that relation between RL electrode and potential measurement electrode is coupled with RC connected model, we designed RL drive output to feedback two electrode for reduction of common mode signal. The conductive textile which was used for two ECG electrode was offered more comfort during night sleep in bed than any other method using attachments. In the method of single-lead EDR, R wave point or QRS interval area could be used for EDR estimation in traditional method, it is, so to speak, the amplitude modulation(AM) method for EDR. Alternatively, R-R interval could be used for frequency modulation(FM) method based on Respiratory Sinus Arrhythmia(RSA). For evaluation of performance on AM EDR and FM EDR from 14 subject, ECG lead III was measured. Each EDR was compared with both temperature around nose(direct measurement of respiration) and respiration signal from thoracic belt(indirect measurement of respiration) on mean squared error(MSE), cross correlation(Xcorr), and Coherence. The upsampling interpolation technique of multirate signal processing is applied to interpolating data instead of cubic spline interpolation. As a result, we showed the real-time EDR extraction processing to be implemented at micro-controller.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.22-31
• /
• 2012

A Smartphone is an intelligent device combined mobile phone and pc's support functions, and can perform multiple functions to satisfy the demands of users. It has excellent processing power and communication modules(DMB, Wi-Fi, Bluetooth, NFC etc) to carry out the demands of users. But continuous using of battery power on processor and equipped modules causes acceleration of battery consumption. This means that effective power management in devices like smartphone is important. Therefore, the management of power consumption on system execution and communication module is a serious issue in this field of study. In this paper, we would like to propose a communication module selection algorithm based on energy consumption parameter of each communication module and data transfer time. Our scheme automatically select appropriate communication system to reduce high energy consumption on bluetooth sleep mode so that this scheme is more efficient and effective thus improving user convenience in longer usage time. Experimental results showed the 20% energy saving.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.14-24
• /
• 2010

Because WSNs operate with limited resources of sensor nodes, its life is extended by cluster-based routing methods. In this study, we use data on direction, distance, density and residual energy in order to maximize the energy efficiency of cluster-based routing methods. Through this study, we expect to minimize the frequency of isolated nodes when selecting a new cluster head autonomously using information on the direction of the upper cluster head, and to reduce energy consumption by switching sensor nodes, which are included in both of the new cluster and the previous cluster and thus do not need to update information, into the sleep mode and updating information only for newly included sensor nodes at the setup phase using distance data. Furthermore, we enhance overall network efficiency by implementing secure and energy-efficient communication through key management robust against internal and external attacks in cluster-based routing techniques. This study suggests the modified cluster head selection scheme which uses the conserved energy in the steady-state phase by reducing unnecessary communications of unchanged nodes between selected cluster head and previous cluster head in the setup phase, and thus prolongs the network lifetime and provides secure and equal opportunity for being cluster head.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.