• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.315-320
• /
• 2003

A total of 240 crossbred(Landrace ${\times}$ Yorkshire ${\times}$ Duroc) pigs were housed from 70 kg live weight and slaughtered at weights of 95, 105, 115 and 125 kg. The left side loins of carcass were obtained at 24 hr postmortem to measure pork quality. There were significant differences(p<0.01) in eye muscle area of pork loins between the slaughter weights of 95 and 105 kg. However, no differences were observed in pork than 105 kg of slaughter weight. Ultimate pH values were decreased with increasing slaughter weight and cooking loss was also reduced(p<0.01) at the heavier weights. Slaughter weights did not affect the shear force and intramuscular fat. However, dry matter(DM) and crude protein(CP) contents of loin were increased, and cooking loss and sarcomere length were decreased with increasing slaughter weight. The lightness(L$^{*}$) and redness(a$^{*}$) of pork loin were increased with increasing slaughter weight. Results suggested that pork quality may be improved when pig slaughter weight is increased from 95 to 125 kg.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.629-634
• /
• 1992

Seventeen Japanese Black steers were used to evaluate the influence of slaughter weight (550 kg, 600 kg or 650 kg), sire (two sires), concentrate feeding (barley or corn) and muscle (six muscles) on the following characteristics: pH value, cooking loss, shear value, moisture and crude fat contents. Crude fat contents were higher, and moisture content and shear values were lower in muscles from the large slaughter weight group 650 kg than those from other slaughter weight groups. Cooking loss, shear value, moisture and crude fat contents differed between sires. Corn feeding increased crude fat content in muscle compared to barley feeding. Muscles containing a large amount of intramuscular fat showed lower shear values and less cooking loss than those containing a small amount of intramuscular fat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1227-1232
• /
• 2008

Carcass characteristics data of Hanwoo (N = 1,084) were collected from two stations of the National Livestock Institute of Animal Science (NIAS), Korea and records from thirteen individual cow-calf operators were analyzed to estimate variance and covariance components and the effect of different slaughter endpoints. Carcass traits analyzed were cold carcass weight (CWT, kg), REA (rib eye area, cm2), back fat thickness (mm) and marbling score (1-7). Four different models were examined. All models included sex and contemporary group as fixed effects and the animal's direct genetic potential and environment as random effects. The first model fitted a linear covariate of age at slaughter. The second model fitted both linear and quadratic covariates of age at slaughter. The third model fitted a linear covariate of body weight at slaughter. The fourth model fitted both linear covariates of age at slaughter and body weight at slaughter. Variance components were estimated using the REML procedure with Gibb's sampler. Heritability estimate of CWT was in the range of 0.08-0.11 depending on the model applied. Heritability estimates of BF, REA and MS were in the ranges of 0.23-0.28, 0.19-0.26, and 0.44-0.45, respectively. Genetic correlations between CWT and BF, between CWT and REA, and between CWT and MS were in the ranges of -0.33 - -0.14, 0.73-0.84, and -0.01- 0.11, respectively. Genetic correlations between REA and BF, between MS and BF and between REA and MS were in the ranges of -0.82 ~ -0.72, 0.04~0.28 and -0.08 ~ -0.02, respectively. Variance and covariance components estimated varied by model with different slaughter endpoints. Body weight endpoint was more effective for direct selection in favor of yield traits and body weight endpoints affected more of the correlated response to selection for the traits of yield and quality of edible portion of beef.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.1
• /
• pp.113-119
• /
• 2006

The physicochemical properties and sensory characteristics for the neck, belly and ham of crossbred pigs SW90 (slaughter weight $90\sim100\;kg$) and SW110(slaughter weight $110\sim120\;kg$) were evaluated to investigate their quality. The water holding capacity, freezing loss, thawing loss, pan boiling loss and water boiling loss were not significantly different between SW90 and SW110, but the thawing loss and water boiling loss of belly were higher than those of other parts(p<0.05). The surface color was not affect by slaughter weight, but the L* value of belly was higher than that of the other parts and a* value was lower than that of the neck and ham(p<0.05). The mechanical texture was not affect by slaughter weight, the hardness of belly was lower than that of the neck and ham, but the springiness, cohesiveness, gumminess, chewiness and shear force of neck and ham were lower than those of belly(p<0.05). The pH, VBN content and TBARS value was not significantly different by slaughter weight. The taste, aroma, texture, juiciness and palatability of SW110 were higher than those of SW90, and the sensory characteristics of belly were higher than those of neck and ham, but their difference was not significant.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.143-154
• /
• 2022

This study was conducted to evaluate the relationship among market weight, slaughter age, yield grade, and primal cut yield in Hanwoo. A total of 403 Hanwoo (Korean native cattle) was assessed for carcass traits such as carcass cold weight, backfat thickness, ribeye area, dressing percentage, yield index, and marbling score. The production yield of the individual major primal cuts of Hanwoo beef was also measured. Carcass cold weight, ribeye area, and backfat thickness, which affect meat quality increased with increased market weight (p < 0.05). The production yield of the ten major primal cuts also increased with increased market weight (p < 0.05). In terms of slaughter age, carcass cold weight, ribeye area, and backfat thickness all increased from 25 months to 28-29 months, and the production yield of all prime cuts also increased with increasing slaughter age. According to the meat yield grade, carcass cold weight and backfat thickness increased from grade A to grade C, although the ribeye area was not affected. The combined findings of the study suggest that slaughtering Hanwoo at the weight of 651-700 kg and 701-750 and age of 28.23 and 29.83 months could be desirable to achieve the best quality and quantity grade of Hanwoo beef. However, the positive correlation of carcass cold weight and backfat thickness, and the negative correlation of the yield index according to primal cuts yield indicated that it is necessary to couple the slaughtering management of cattle with improved genetic and breeding method of Hanwoo to increase the production yield of the major prime cuts of Hanwoo beef.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.611-616
• /
• 1995

A study was conducted which demonstrated that Dhofari cattle responded well to intensive management systems in terms of growth rates and carcass yields. Twenty-four Omani Dhofari bulls and steers (12 of each) were reared from birth until slaughter at 110, 160 and 210 kg body weight (for of each sex at each slaughter weight). Calves were fed ad libitum a diet of concentrate (16.5% CP) and Rhodesgrass hay (8.8% CP). Bulls and steers reached the predetermined slaughter weights of 110, 160 and 210 kg at 154 and 164; 219 and 233; 273 and 310 days of age, respectively. Respective mean pre and post-weaning daily body weight gains for bulls and steers were 581 and 530; 796 and 706 g averaging 645 and 596 g over 36 weeks. At 210 kg, the heaviest weight of the study, dressing-out percentage (DO) was 54.5 and 56.9 yielding carcasses of 115.9 and 118.5 kg which contained 60.4 and 61.5% muscle; 11.6 and 11.4% bone and 24.5 and 22.9% fat for bulls and steers, respectively. Proportion of bone in the carcass decreased, that of fat increased, whereas that of muscle remained unchanged between slaughter weights of 110 to 210 kg. That resulted in increased muscle : bone and decreased muscle : fat ratios. At 160 kg body weight, bulls had less fat and more muscle and bone than steers but there were no sex differences in carcass composition at 210 kg slaughter weight.

• Journal of Animal Science and Technology
• /
• v.55 no.4
• /
• pp.315-323
• /
• 2013

This study analyzed optimal slaughter ages and carcass traits to investigate factors that affect farm incomes. Carcass characteristics and economical analysis of 81 Hanwoo steers previously tested (Expt. 1) and 5,826 steers from Gangwon-Do, area A (Expt. 2) were used. In Expt. 1, the strongest relationship was between the slaughter age and the carcass weight based on the $R^2$ value, and the weakest relationship was between the slaughter age and the marbling score based on the $R^2$. The slaughter age, marbling score, and rib-eye area of steers slaughtered from 26 to 31 months of age had a positive effect on income, but back fat thickness had a negative effect. In the economical analysis of Expt. 1, the optimal time for slaughter was 31 months of age. In Expt. 2, composed of steers slaughtered from 26 to 35 months of age in farms site of area A, the income was highest from steers slaughtered at 28 months of age, after which the income decreased. From the results of Expt. 1 and 2, it is evident that the optimal slaughter age of Hanwoo steers is affected by the genetic differences of calves, the feeding program and management, fattening skills, or carcass price. In order to improve the income of individual farms, the slaughter age must be precisely decided by understanding the exact relationship between the feeding cost of Hanwoo steers and slaughter results, such as carcass weight, yield grade and quality grade.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1252-1258
• /
• 2015

The Liangshan pig is a traditional Chinese small-sized breed; it has a relatively long feeding period and low meat production ability but superior meat quality. This study utilized three non-linear growth models (Von Bertalanffy, Gompertz, and logistic) to fit the growth curve of Liangshan pigs from an unselected, random-bred pig population and estimate the pigs most suitable slaughter weight. The growth development data at 20 time points of 275 Liangshan pigs (from birth to 250 d) were collected. To analyze the relative gene expression related to development, seven slaughter weight phases (50, 58, 66, 74, 82, 90, and 98 kg) (20 pigs per phase) were examined. We found that the Liangshan pig growth curve fit the typical S-curve well and that their growth turning point was 193.4 days at a weight of 62.5 kg, according to the best fit Von Bertalanffy model based on the goodness of fit criteria. Furthermore, we estimated that the most suitable slaughter weight was 62.5 to 74.9 kg based on the growth curve and the relative expression levels of growth-related genes.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.409-414
• /
• 2005

The effects of slaughter weight on blood profile and pork qualities of japan berkshires were investigated A total 72 pigs were divided into 3 groups$(125\~130,\;105\~110\;or\;95\~104\;kg)$. At each slaughter weight pigs were conventionally slaughtered and then chilled overnight The carcass characteristics (carcass weight backfat thickness and grades) were determined on those carcass, the muscle longissimus dorsi was removed from each left side at 5th to 13th rib and meat qualities were evaluated. Blood profile including cortisol, creatine phos-phokinase (CPK), lactate dehydrogenase (LDH), glucose and phosphorus was not significantly (p>0.05) different among all slaughter weight, However, the calcium contents of pigs at $95\~104\;kg$ were significantly (p<0.05) higher than the other weights. The carcass weight and backfat thickness of pigs slaughtered at $125\~130\;kg$ were higher than those of $105\~110\;or\;95\~104\;kg$. The carcass grade of pigs slaughtered at $125\~130\;kg$ were significantly (p<0.05) lower than the other weight. The moisture contents of pigs slaughtered at $125\~130\;kg$ were significantly lower than the other weights, but crude protein contents were significantly (p<0.05) higher, Cooking loss and shear lone values of pigs slaughtered at $95\~104\;kg$ were significantly (p<0.05) lower than the other weight. CIE $a^*\;and\;b^*$ values of pigs slaughtered at $105\~110\;kg$ were significantly higher than the other weights. These results imply that the carcass characteristics (carcass weight and backfat thickness) could be affected by slaughter weight the cooking loss and shear force values of pigs slaughtered at $125\~130\;kg$ resulted in higher than those of $105\~110kg\;or\;95\~104\;kg$.