• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.103-108
• /
• 2004

In this study, examined heavy-weight floor impact sound to structure that have slab thickness of 4 form at a standard laboratory through noise and vibration measured. The results show that the nature Natural frequency increased according to change of thickness of each slab by finite element analysis, and acceleration value decreased. Results of measurements of noise and vibration at a standard laboratory, the slab 210, 240mm structures was construed result such as finite element analysis but the slab 150, 180mm structures is construed that influence in vibration acceleration level because edge condition has condition that contact to ground. Therefore, in modelling process for analysis, is thought that need that condition analyzes examining element influencing about structure that contact to ground.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.12-13
• /
• 2019

Flexible Table Form is being used more frequently at the level of formwork in construction site. However, one of the most common structural frameworks, the RC column-beam structure, is having problems in these factors. To improve this problems, this study developed support devices and proposed installation specifications to enable application of the one-way void slab method to flexible table form. It is expected that the effects of reducing the self-weight of the slab in the floor slab construction using flexible table form.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.372-378
• /
• 2005

Finite element analysis of concrete slab system in apartment building was executed using the tables of orthogonal arrays, and optimal design process was proposed. At first, experimental results show that sound peak components to influence the overall level and the rating of floor impact sound insulation were coincident with natural frequencies of the reinforced concrete slab. Finite element model of concrete slab was compared with experimental results, and well corresponded with an error of less than 10%. The tables of orthogonal arrays were used for finite element analysis with 8 factors. 3 related to material properties and 5 related to slab shape parameters and its results were analyzed by statistical method, ANOVA. The most effective factor among them was slab thickness, and main effect factor from slab shape parameters was different from each natural frequency. The interaction was found in the higher mode over $3^{rd}$ natural frequency. From main effect plot and interaction plot, the optimal design factor to increase the natural frequency was determined.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.21-31
• /
• 2018

본 연구에서는 시공이 완료된 CFRD에 대하여 담수시점부터 수위변화에 따른 댐 제체의 변형거동을 파악하기 위하여 현장 모니터링을 통하여 댐의 변위를 분석하고, 이를 수치해석 결과와 비교하였다. 담수에 따른 댐 정상 및 하류사면 제체의 거동을 계측한 결과, 축방향 수평변위, 상 하류측 수평변위, 침하가 대부분 초기 담수로부터 저수위가 댐 높이 절반 정도에 이를 때부터 발생하였다. 그 후 저수위 최고 상승시까지 변위가 진행된 후 수위에 관계없이 일정하게 수렴되는 양상을 보였다. CFRD에서 가장 중요한 역할을 하는 차수벽의 수평변위는 모든 지점에서 비슷한 양상을 보였다. 차수벽의 수평변위는 담수 전 외부온도의 영향으로 동절기에 증가하고 하절기에 감소하는 경향이 있었다. 또한, 담수 후 저수위가 댐 높이 절반 정도에 이를 때까지 변위가 증가한 후 수위상승과 함께 감소하는 경향을 보였다. 결과적으로 차수벽의 거동은 저수위 조건뿐 아니라 담수 후에도 계절적인 변화를 나타내며, 콘크리트 슬래브의 재료적인 특성 영향이 큰 것으로 판단된다. 수치해석 결과 댐 축조 후 최대 침하량과 발생 위치는 실제와 다소의 차이가 있었는데, 이러한 차이는 해석시 입력 매개변수의 추정, 축조일수 및 층 시공두께 등 다양한 설계와 시공의 차이에서 기인한 것으로 판단된다. 그리고 전반적인 기간에 대하여 침하는 댐 축조기간 동안 대부분 완료되었고 담수 초기에 약간의 침하가 발생한 후 수렴되었다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.77-81
• /
• 2003

This paper is contents about vibration character that produce floor slab make up of concrete when played striking at each location. An experiment was achieved in apartment house just before occupancy which build newly to 100m$^2$ scale. Vibration level plays striking in whole 9 places and measured vibration character of x, y, z direction. As the result, vibration level of verticality direction showed high than horizontality direction.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.651-657
• /
• 2010

Previous experimental results performed by many researchers for a couple of decades in South Korea have shown that an absorbing sheet inserted in a conventional floating slab system for thermal insulation or vibration absorption may amplify the vibration of the slab system at specific frequency ranges depending on the material properties of the sheet. The amplified vibration, consequently, results in the heavy weight floor impact noise exceeding the sound level limit for an apartment house, 50 dB. In this study, the amplification mechanism is examined through numerical analysis and a new slab system is proposed to reduce the amplification and control the noise. The new slab system consists of studs connecting the base slab and upper concrete finishing yielding the dramatically increased stiffness of the slab. The numerical simulation is performed to investigate the effect of the slab system with studs on the vibration and noise control. The results show that the performance of the slab is sensitive to the number and location of studs, and the heavy weight floor impact noise can be reduced up to 6~7 dB compared to the conventional slab system at the optimal stud location.

• Steel and Composite Structures
• /
• 제52권6호
• /
• pp.627-645
• /
• 2024

Punching shear is a brittle failure that occurs within the RC flat slabs where stresses are concentrated within small regions, resulting in a catastrophic and unfavorable progressive collapse. However, increasing the slab slenderness ratio is believed to significantly affect the slab's behavior by the induced strain values throughout the slab depth. This study examines the punching shear behavior of flat slabs by the nonlinear finite element analysis approach using ABAQUS software, where 72 models were investigated. The parametric study includes the effect of opening existence, opening-to-column ratio (O/C), temperature level, slenderness ratio (L/d), and flexural reinforcement rebar diameter. The behavior of the punching shear failure was fully examined under elevated temperatures which was not previously considered in detail along with the combined effect of the other sensitive parameters (opening size, slab slenderness, and reinforcement rebar size). It has been realized that increasing the slab slenderness has a major role in affecting the slab's structural behavior, besides the effect of the flexural reinforcement ratio. Reducing the slab's slenderness from 18.27 to 5.37 increased the cracking load by seven times for the slab without openings compared to nine times for the initial stiffness value. In addition, the toughness capacity is reduced up to 80% upon creating an opening, where the percentage is further increased by increasing the opening size by about an additional 10%. Finally, the ultimate deflection capacity of flat slabs with an opening is increased compared to the solid slab with the enhancement being increased for openings of larger size, larger depths, and higher exposure temperature.

• Computers and Concrete
• /
• 제23권2호
• /
• pp.121-131
• /
• 2019

Due to the heterogeneity nature of the concrete, it is difficult to simulate the hyperdynamic behaviour and crack trajectory of concrete material when subjected to explosion loads. In this paper, a 3D nonlinear numerical study was conducted to simulate the hyperdynamic behaviour of concrete under various loading conditions using Riedel-Hiermaier-Thoma (RHT) model. Detailed calibration was conducted to identify the optimal parameters for the RHT model on the material level. For the component level, the calibrated RHT parameters were used to simulate the failure behaviour of plain concrete (PC) slab under free air blast load. The response was compared with an available experimental result. The results show the proposed numerical model can accurately simulate the crack trajectory and the failure mode of the PC slab under free air blast load.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.237-332
• /
• 2002

We constructed ceiling structure and floor structure for elevation of sound insulation performance of concrete slab of apartment house. And, we wished to measure heavy floor impact sound level and light floor impact sound level of these structure. As the result, light floor impact sound level interception performance of concrete slab was measured by thing that construction work of gypsum baud is important. Heavy floor impact sound level interception performance was measured by thing that it is effective that construct to thickness about 30 millimeters on concrete Slav. It was measured effectively that heavy floor impact sound level interception performance constructs rubber chip to thickness about 30 millimeters on concrete Slav.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.661-668
• /
• 2009

횡하중을 받는 포스트 텐션(PT) 플랫 플레이트 슬래브 골조의 해석은 일반적으로 유효보폭모델을 많이 사용한다. 횡 변위비와 불균형 모멘트을 예측하기 위한 유효보폭모델의 정확성은 PT 플랫 플레이트 슬래브의 유효강성을 어떻게 평가하느냐에 달려 있다. 슬래브 강성은 횡하중에 의한 작용모멘트의 증가와 함께 감소되기 때문에, 슬래브의 강성 감소현상은 플랫 플레이트 골조의 해석에 반영되어야 하며 균열의 영향 또한 고려되어야 한다. 횡하중을 받는 PT 플랫 플레이트 슬래브 구조의 정확한 해석을 위해 슬래브 강성감소는 유효보폭모델이 정확하게 되어야 한다. 이 목적을 위해 이 연구는 기존 연구자들에 의해 실시된 PT 플랫 플레이트 내부 및 외부 접합부의 실험 결과를 수집하였다. 그리고 이 연구는 시행착오를 통해 각 실험체의 횡강성에 유효보폭모델의 강성이 수렴하도록 슬래브의 폭을 감소시켰다. 슬래브의 모멘트 크기에 따라 비선형 회귀 분석을 수행함으로서 슬래브에 대한 강성감소계수 계산식을 제안하였다. 이 연구에서는 제안된 식의 정확성을 검증하기 위해서 PT 플랫 플레이트 골조의 실험 결과와 비교하였다. 제안된 식을 적용한 유효보폭모델은 작용하중의 크기에 따라 변화하여 PT 실험체의 실제 강성을 잘 예측하는 것으로 나타났다.