• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.434-445
• /
• 2014

The meaning of this research is to make recognition for necessity of ergonomic fashion design research. And the purpose is to provide the guidelines for ergonomic fashion product development. For this, literature research and analysis of empirical illustration of product design indicating ergonomics characteristic are implemented. Among the body-conscious active sportswear, cycle wear, swim suit, and skin scuba wet suit were selected and analyzed. Then they were explained according to the ergonomics characteristics arranged previously. Lastly, the features of ergonomic fashion design were arranged by composition elements of the clothing such as pattern, sewing, material and detail. The characteristics of ergonomic design derived from literature and advanced researches are efficiency, usability, functionality and safety. Through research and analysis, the characteristics of ergonomic fashion design are as followings. In pattern, it is related to the 3D structure division pattern, the reduction pattern design, the closing & opening part design for easy detachment, the receipt and the changeable design. In sewing, it is related to the use of latest sewing techniques and the finish using silicon or rubber band. In material, it is related to the use of high performance fabrics and the proper arrangement of these. In detail, it is related to the convenient detail, the storage detail, the adjustable detail, and the body protection detail.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.4
• /
• pp.262-267
• /
• 2013

The purpose of this study was to research for anti-oxidation and anti-wrinkle effects of Acar mono Sap (AM). To cosmetic effect of AM, safety effect (MTT assay), anti-wrinkle effect (elastase, MMP-1 inhibition assay) and anti-oxidant effect (DPPH assay) were measured. When water extract of AM was used for cell viability, it was over 100% at 6% (6 ml/100 ml in phosphate buffer) concentration. AM showed 45.7% elastase inhibition and 23.7% MMP-1 inhibition at 50% (50 ml/100 ml in phosphate buffer) concentration so that it had good anti-wrinkle characteristic. And AM showed 68.9% antioxidation capacity at 50% concentration by using a DPPH assay. Consequently, AM can be used as natural materials or additives for human skin owing to their beneficial biologic functions, including the anti-wrinkle effect, for cosmetic compositions.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.477-482
• /
• 2009

Anthocyanin and origomeric proanthocyanidin (OPC) fractions showing antioxidizing activity are present in grape extracts. Grape extracts are widely used in cosmetic applications as functional ingredients. The aim of our study is to isolate the antioxidant fraction from waste of grape products. The extraction was done using soxhlet apparatus. Next, the extraction was subjected for identification of antioxidants by using HPLC. Antioxidant assay was performed by using 2,2-diphenyl-picryl-hydrazyl (DPPH) and superoxide dismutase (SOD) method. Antioxidizing activity was found to be higher in grape seed extract when compared to grape skin extract. Using the extract, a novel formula with multi lamella emulsion structure has been developed and its safety and stability were confirmed by standard protocols.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.239-240
• /
• 1998

DTET(Dual Transcutaneous Energy Transmission System) is the stable power transferring unit for TAH(Total Artificial Heart) which uses more power than any other artificial organ. It has better efficiency and safety than an ordinary single TET. By reducing the load, it can reduce the change of supplying current for each single TET and it causes the lower change of efficiency. The increment of magnetic flux in coils enables delivering power through thick skin. It can enable internal batteries remove when will be used in a failure of TET, for a lithium ion battery has heavier weight than TET. A DTET should be studied the effect between each coils that generate magnetic flux. It should be compared the advantage with the weakness when it is used.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.93-102
• /
• 1992

In this paper presented is the reliability analysis of a double skinned hull structure against the ultimate bending moment and fatigue strength under longitudinal bending. The ultimate bending strength is obtained through the beam-column approach in which the load-end shortening curves(stress-strain curves) of stiffened plates under mini-axial compression are derived using the concept of plastic hinge collapse. The fatigue damage only is considered as fatigue failure for which the Miner's damage rule is employed. Assessed are fatigue reliability for the possible joint types found at deck structure. Also included is the reliability analysis of a series system of which elements are ultimate and fatigue failure.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.383-388
• /
• 2011

We investigated methiozolin acute toxicity using with Sprague-Dawley rats. The results of acute oral toxicity using rats showed $LD_{50}$ value of over 2,000 mg/kg bw for methiozolin. The calculate acute dermal $LD_{50}$ value of methiozolin was over 4,000 mg/kg. The skin irritation test showed moderately irritation and weak response of eye irritation test was observed in this experimental condition. According to these results, We concluded that methiozolin was Category IV in GHS chemical classification for acute toxicity. Future, we need more chronic toxicity test for safety.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.223-229
• /
• 2008

In this paper. we propose the real-time vision system which judges drowsiness driving based on levels of drivers' fatigue. The proposed system is to prevent traffic accidents by warning the drowsiness and carelessness using face-image analysis and fuzzy logic algorithm. We find the face position and eye areas by using fuzzy skin filter and virtual face model in order to develop the real-time face detection algorithm, and we measure the eye blinking frequency and eye closure duration by using their informations. And then we propose the method for estimating the levels of drivel's fatigue based on measured data by using the fuzzy logic and for deciding whether drowsiness driving is or not. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• Journal of Environmental Health Sciences
• /
• v.33 no.3
• /
• pp.211-216
• /
• 2007

This study was to determine the effect of cooling part of the trunk without harm for the health. The results provide basic data for the development of clothing which could increase work efficiency and reduce body strain in hot environment. Eight males took part in the study. The experiment was conducted in a climate-chamber controlled with $37{\pm}1^{\circ}C,\;50{\pm}5%R.H$. The trunk was divided into six areas to be cooled: head, neck, chest, abdomen, the upper back, the lower back. According to preceding studies, permissible safety cooling limits of skin temperature, of each part of the trunk for four hours cooling were $25^{\circ}C$ on the head, $20^{\circ}C$ on the neck, $27^{\circ}C$ on the chest, $25^{\circ}C$ on the abdomen, $20^{\circ}C$ on the upper back, $20^{\circ}C$ on the lower back. So cooling temperatures of each region set up temperatures above mentioned. In conclusion, the head, the neck and the upper back cooling could reduce sweating amount, rectal temperature and heart rates and reduce the heat stress of workers exposing in the hot environment by decreased subjective sensations of heat and comfort. Thus, it was concluded that effectiveness of cooling among the trunk was best on the head and the neck.

• Journal of Haehwa Medicine
• /
• v.10 no.2
• /
• pp.73-81
• /
• 2002

In the literal study of anti-tumor effects of Jakeumjung. the results were as follows. 1. Jakeumjung is a traditional oriental medical prescription which is composed of Cremastare appeniculatae tuber, Euphorbiae pekinensis radix, Toosendan fructus, Chinensis galla, Moschus, Realgar and Cinnabaris. 2. Jakeumjung is applied to patients by administering or external application. When it is administered for patients, pertinent dose is 0.6~1.5g twice or three times per one day. When it is applied by external application, we melt it by water or vinegar and apply it to patients. 3. Effects of Jakeumjung are expelling toxin and pestilence, counteracting pathogen and relieving stagnation, detumescence and stopping pain. So it is used for detoxification from ancient. In recent, it is often used for cancer such as breast cancer, pancreatic cancer, epigastric cancer, acute leukemia, lymphoma, thymus cancer and skin cancer. 4. From the various experiments, Jakeumjung has been proved to have antifungal and antitumor effects. It inhibits and kills L7212, L1210 cells of leukemia. Especially, it acts in S stage of cell period. 5. Jakeumjung includes mineral medicines such as Realgar, Cinnabaris. So if we execute progressive study for anticancer effects and safety, the boundary of oriental medicine of using mineral medicines for cancer therapy will magnify in the future.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.18-21
• /
• 2004

A GFRP based composite blade was developed for a 750kW wind energy conversion system of type class I. The blade sectional geometry was designed to have a general shell-spar structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, buckling stability, blade tip deflection and natural frequencies at various rotational speeds were evaluated to satisfy the strength requirements in accordance with the IEC61400-1 and GL Regulations. For designing a lightweight blade, the thickness and the lay-up pattern of the skin-foam sandwich structures were optimized iteratively using the DOT program T-bolts were used for joining the blade root and the hub, which were modeled using a 3D FE volume model. In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel. bolts were predicted by taking account of the bolt pretension and the root bending moments. The calculated stresses were compared with the material strengths.