• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.11-17
• /
• 2000

The drift and movement of oil slick in the sea are closely related to the flows at the sea surface (at 0m depth) because specific gravity of an oil is lighter than that of sea water. As an effort toward a development of realistic model for oil spill drift on the sea surface, a study on sea surface wind-induced drift (skin drift) at 4 coastal regions of Korea was carried out. In this study, skin drifts were inferred from difference between the flow at the sea surface and that in underwater (at 1.5m depth). The average speed of skin drift in our experiments was 2.9% of wind speeds and the average direction of skin drift to wind was deflected to the right by 18.6°. The results of this experiment were used in the modelling of the skin drift as a prompt response of time-variable wind. The modelled skin drift, which corresponds to observed wind, successfully reproduced the observed trajectories of sea surface flows.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.291-300
• /
• 2007

The crayfish-shaped artificial bait for octopus drift line is manufactured, into which is made to insert ordinary bait. The effects of the artificial bait are confirmed through the analysis of octopus' behavior in the laboratory in comparison with the existing bait of pig-fat skin, and the investigation of the octopus catch on the sea, and in addition, the examination of the water quality in relation to the bait to be inserted into the artificial bait is done together. The artificial bait is red in color, 10.5cm in the length of the body, and 29g in weight. The octopus behavior in relation to the bait in the laboratory has shown a good result in which more than 30% of the octopuses rushed to the artificial bait. In the analysis of the octopus sitting time by the bait, the octopus stayed longer with the artificial bait(63.7%) than the pig-fat skin(25.1%). The octopus sitting time at the artificial bait inserted with frozen squid(48.8％, 44.6％) is shown to be longer than that of the pig-fat skin(36.9％) or boiled fish paste(21.2％). In the analysis of sitting frequency to the bait, the case of the artificial bait(total 17 times) was more than that of the pig-fat skin(total 3 times), and the case of the artificial bait with frozen squid attracted the octopuses more frequently than that of the pig-fat skin or the boiled fish paste. In the field experiment, the fishing boat A(Manseon-ho, 1.22tons) caught the total 93 octopuses, while the fishing boat B(Ilho-ho, 0.73tons) caught the total 154 octopuses, all of which weighed less than 9.0kg. In the comparison with the total catch, the case with the artificial bait was a little higher than that of the pig-fat skin($^{**}p\;<\;0.05$). In the analysis of the water quality in relation to the baits, the COD showed the descending order of frozen squid(0.57mg/g), boiled fish paste(0.18mg/g), and pig-fat skin(0.10mg/g), and the case with frozen squid was the highest and the case of the pig-fat skin, lowest. The total phosphorus, like the COD, showed the highest in frozen squid(0.02mg/g), and in case of the total nitrogen, unlike the COD, the pig-fat skin was shown to be the highest(0.006mg/g).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.78-85
• /
• 2006

A survey on the fishing gear for octopus drift-line fishing was done in Gangwon-do, Sacheon, Gyeongnam and Hokkaido, Japan, while a survey on the environments of fishing grounds used data from January to August from the Korea east coast farming forecast system of Donghae Fisheries Research and Development Institute. The present situation of fishing was examined with boats engaging in drift-line fishing from March to August in the coastal waters along Gangneung. The fishing tackle for octopus drift-line fishing was made manually, and the size, shape, and weight of the hook and number of shooting used vary according to the fishing time and region. Lead is used as the material for sinkers. As bait, pork fat with skin is mostly used in Gangwon-do. The temperature of the bottom water layer in the coastal fishing ground of Gangneung from April to June ranges from $3.2-12.4^{\circ}C$, which is the optimal temperature for octopuses. During July and August, the temperature ranges from $5.0-20.6^{\circ}C$. The maximum difference between day and night temperatures reached up to $9.2^{\circ}C$. Salinity is generally stable at $33.2-35.324.6%_{\circ}$, which does not affect the inhabitation of octopuses. The octopus catch reached its peak from May to July, while most octopuses weighed less than 1 kg (76.7%). The results show that it is effective to carry out octopus drift-line fishing up to a depth of 40 meters; and that the maximum number of octopuses per line is obtained with an operation time of six hours.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.588-590
• /
• 2006

Recently, many on-line approaches to instrument channel surveillance (drift monitoring and fault detection) have been reported worldwide. On-line monitoring (OLM) method evaluates instrument channel performance by assessing its consistency with other plant indications through parametric or non-parametric models. The heart of an OLM system is the model giving an estimate of the true process parameter value against individual measurements. This model gives process parameter estimate calculated as a function of other plant measurements which can be used to identify small sensor drifts that would require the sensor to be manually calibrated or replaced. This paper describes an improvement of auto-associative kernel regression by introducing a correlation coefficient weighting on kernel distances. The prediction performance of the developed method is compared with conventional auto-associative kernel regression.

• International Journal of High-Rise Buildings
• /
• v.7 no.1
• /
• pp.17-32
• /
• 2018

This paper explores the function of a structural skin with an embossed surface applicable to use for tall building structures. The major diagrid system with a secondary embossed surface structure provides an enhanced perimeter structural system by increasing tube section areas and reduces aerodynamic loads by disorienting major organized structure of winds. A parametric study used to investigate an optimized configuration of the embossed structure revealed that the embossed structure has a structural advantage in stiffening the structure, reducing lateral drift to 90% compared to a non-embossed diagrid baseline model, and results of wind load analysis using computational fluid dynamics, demonstrated the proposed embossed system can reduce. The resulting undulating embossed skin geometry presents both opportunities for incorporating versatile interior environments as well as unique challenges for daylighting and thermal control of the envelope. Solar and thermal control requires multiple daylighting solutions to address each local façade surface condition in order to reduce energy loads and meet occupant comfort standards. These findings illustrate that although more complex in geometry, architects and engineers can produce tall buildings that have less impact on our environment by utilizing structural forms that reduce structural steel needed for stiffening, thus reducing embodied $CO^2$, while positively affecting indoor quality and energy performance, all possible while creating a unique urban iconography derived from the performance of building skin.

• Ocean and Polar Research
• /
• v.35 no.3
• /
• pp.193-203
• /
• 2013

A GPS-drifter was newly designed to observe the sea surface skin current and to estimate the direct wind effect on the sea surface. After conducting a test to establish and verify the accuracy of the GPS itself in the laboratory, in-situ experimental campaigns at Saemangeum in Gunsan city and Haeundae in Busan city, Korea, were carried out to ascertain the drifter track and to estimate the velocity data set on Oct. 3, 15, 23, 27 and Nov. 25, 2011. The current meters, RCM9 and ADCP, were moored together to remove the background current field, and the wind data were obtained from several marine stations such as towers and buoys in these areas. The drifter-observed velocity show good agreement with the flow obtained by the HF radar in the Saemangeum area. The direction of the wind-driven current extracted from the drifter-observed velocity was completely deflected to the right, however the degree of the angle was different according to the drift types. The average speed of the wind-driven current matched with 2.19~2.81% of the wind speed and the deflection angle was about $8.0{\sim}10.9^{\circ}$ without adjustment for the land-sea effect, and about 2.19~2.84% and $4.1{\sim}6.0^{\circ}$ with the adjustment for the land-sea effect.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.289-301
• /
• 2008

Double skin composite (DSC) wall is a structural wall that is filed with concrete between two steel plate skins connected by tie bars. This type of wall was developed to enhance the structural performance of wall, to reduce wall thickness, and to enhance constructibility, eliminating the use of formwork and re-bars. In this study, cyclic tests were performed to investigate the inelastic behavior and earthquake resistance of isolated and coupled DSC walls with rectangular and T-shapedcross-sections. The DSC walls showed stable cyclic behaviors, exhibiting excellent energy dissipation capacity. The te st specimens failed by the tensile fracture of welded joints at the wall base and coupling beam and by the severe local buckling of the steel plate. The deformation capacity of the walls varied with the connection details at the wall base and their cross-sectional shapes. The specimens with well-detailed connections at the wall base showed relatively god deformation capacity ranging from 2.0% to 3.7% drift ratio. The load-carrying capacities of the isolated and coupled wall specimens were evaluated considering their inelastic behavior. The results were compared with the test results.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.340-344
• /
• 2018

Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.504-508
• /
• 2010

Purpose: Traumatic telecanthus can result from nasoethmoid-orbital fractures. Repair of the medial canthal tendon (MCT) using transnasal wiring is regarded as a choice of method to treat telecanthus, however, is often complicated by incomplete anchoring and drift of canthus, extrusion of wire, in-fracture of orbital bone, and eye damage. The authors introduced oblique transnasal wiring method through the Hiraga's epicanthopalsty incision instead of well-known classical bicoronal approach. Methods: Five patients with traumatic telecanthus were treated with this method. Though the Hiraga's epicanthoplasty incision, we could approach the operative field; the medial orbital wall and detached MCT. Oblique transnasal wiring was performed as following steps. After slit skin incision on the contralateral nasal recession area, drill holes were made from this point to the superior and posterior point of lacrimal sac of deformed eye. A 2-0 wire was double-passed through the holes and MCT. Traction was applied to ensure pulling the MCT and the wires were twisted in the contralateral nose, securing the MCT in the correct position. Results: All patients except 1 person showed improvement and rapid recovery. On average each canthus was moved 5.6 mm medially. In all cases, there were no eyelashes disappear, lacrimal canaliculitis, lacrimal duct injury, or infections. Conclusion: The Hiraga's epicanthoplasty incision could give sufficient operative field to reattach the MCT in traumatic telecanthus patients. And the oblique transnasal wiring technique is effective for the Asians who have flat nose and exophthalmic eye. The authors conclude that this technique could be a simple, safe and scarless method to correct traumatic telecanthus.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.2
• /
• pp.103-114
• /
• 2021

The purpose of this study is to provide basic data for habitat restoration by implementing a series of processes of capturing and translocating Kaloula borealis and managing them in artificial breeding facilities. The study site in Samcheon, Jeonju-si, Jeollabuk-do was a waste landfill site in the past, and Kaloula borealis was found during the Samcheon Ecological River Restoration Project around March 2018. To restore the habitat, a plan was established to capture, translocate, artificially breed, and release Kaloula borealis at the site. The capture methods of adult Kaloula borealis were pitfall trap and drift fence, direct capture, and deep barrels. During 2018-2019, 86 adults of Kaloula borealis were captured and translocated to artificial breeding facilities. VIE-tagging was inserted under the skin for monitoring. For artificial breeding, Gryllus bimaculatus with oyster powder and vegetables were regularly supplied to feed Kaloula borealis. At the end of October 2020, 150 young Kaloula borealis raised in artificial breeding facilities were found not entering hibernation, so they were managed in a separate artificial breeding facility. Some young and adult Kaloula borealis currently hibernating will be scheduled to be continuously managed in artificial breeding facilities and released to the restored habitat in the spring of 2021.