• Archives of Plastic Surgery
• /
• v.41 no.4
• /
• pp.407-413
• /
• 2014

Background Implant malposition can produce unsatisfactory aesthetic results after breast augmentation. The goal of this article is to identify aspects of the preoperative surgical planning and intraoperative flap fixation that can prevent implant malposition. Methods This study examined 36 patients who underwent primary dual plane breast augmentation through an inframammary incision between September 1, 2012 and January 31, 2013. Before the surgery, preoperative evaluation and design using the Randquist formula were performed. Each patient was evaluated retrospectively for nipple position relative to the breast implant and breast contour, using standardized preoperative and postoperative photographs. The average follow-up period was 10 months. Results Seven of 72 breasts were identified as having implant malposition. These malpositions were divided into two groups. In relation to the new breast mound, six breasts had an inferiorly positioned and one breast had a superiorly positioned nipple-areolar complex. Two of these seven breasts were accompanied with an unsatisfactory breast contour. Conclusions We identified two main causes of implant malposition after inframammary augmentation mammaplasty. One cause was an incorrect preoperatively designed nipple to inframammary fold (N-IMF) distance. The breast skin and parenchyma quality, such as an extremely tight envelope, should be considered. If an extremely tight envelope is found, the preoperatively designed new N-IMF distance should be increased. The other main cause of malposition is failure of the fascial suture from Scarpa's fascia to the perichondrium through an inframammary incision. As well, when this fixation is performed, it should be performed directly downward to the perichondrium, rather than slanted in a cranial or caudal direction.

• Archives of Plastic Surgery
• /
• v.47 no.4
• /
• pp.365-370
• /
• 2020

The ability to directly harvest thin and superthin perforator flaps without jeopardizing their vascularity depends on knowledge of the microsurgical vascular anatomy of each perforator within the subcutaneous tissue up to the dermis. In this paper, we report our experience with ultrahigh-frequency ultrasound (UHF-US) in the preoperative planning of thin and superthin flaps. Between May 2017 and September 2018, perforators of seven patients were preoperatively evaluated by both ultrasound (using an 18-MHz linear probe) and UHF-US (using 48- and 70-MHz linear probes). Thin flaps (two cases) and superthin flaps (five cases) were elevated for the reconstruction of head and neck oncologic defects and lower limb traumatic defects. The mean flap size was 6.5×15 cm (range, 5×8 to 7.5×23 cm). No complications occurred, and all flaps survived completely. In all cases, we found 100% agreement between the preoperative UHF-US results and the intraoperative findings. The final reconstructive outcomes were considered satisfactory by both the surgeon and the patients. In conclusion, UHF-US was found to be very useful in the preoperative planning of thin and superthin free flaps, as it allows precise anticipation of very superficial microvascular anatomy. UHF-US may represent the next frontier in thin, superthin, and pure skin perforator flap design.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.3
• /
• pp.649-653
• /
• 2008

The aqueous extract from Asiasari radix (AEAR) was used to investigate the effect of ${\alpha}$-melanocyte stimulating hormone induced melanogenesis in B16F10 mouse melnoma cells. The treatment with AEAR at the 1.0 and 2.0 mg/ml level significantly inhibited the biosynthesis of melanin without changes of cell growth and morphology compared with untreated control. The AEAR-treated cells at the 2.0 mg/ml level were more efficient than commercial arbutin at 0.1 mg/ml. The tyrosinase activity also significantly decreased in AEAR-treated cells at the 1.0 and 2.0 mg/ml level. The Western analyses confirmed the slightly decreased expression of tyrosinase by AEAR treatment. These results indicate that AEAR may contribute to the inhibition of melanin biosynthesis through regulating tyrosinase activity and expression and serve as a new candidate in the design of new skin-whitening or therapeutic agents.

• Proceedings of the KSLP Conference
• /
• 2003.11a
• /
• pp.182-182
• /
• 2003

Objectives : The methods to treat glottic incompetence include thyroplasty type I, arytenoid abduction, and intracordal injection using various materials. The intracordal injection is easy and simple and does not require skin incision. In general, the grafted cartilage shows a high survival rate, a low absorption rate and small voluminous change. The authors performed injection of minced autologous auricular cartilage and fat using a Bruning injector in unilateral vocal cord palsy We evaluate the effect and safety of autologous auricular cartilage intracordal injection. Study Design : Retrospective study. Methods : Auricular cartilage was obtained by incising tragus vertically and it was minced with a scalpel and #15 blade. About 2g of abdominal fat was obtained by small periumbrical incision and cut into small pieces. The minced cartilage was put into a 1$m\ell$ injector and then the injector was filled with fat. The operation was conducted under laryngeal microscope. Minced cartilage was injected into the vocalis muscle at the junction of the middle and posterior third of the vocal fold. In three cases, we performed autologous cartilage intracordal injection. Results : We observed no postoperative complications, such as dyspnea, granulation, inflammation, in any of the cases. The voice was improved compared with the voice prior to operation in all cases. Conclusion : Although the cases are still limited and the observation period is short, we suggest that the autologous cartilage using the auricular cartilage is the ideal and new effective augmentative material in vocal cord palsy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.491-491
• /
• 2011

Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.152-162
• /
• 2005

Coolant rubber hoses for automobile radiators can be degraded and thus failed due to the influence of contacting stresses of air and coolant liquid under the thermal and mechanical loadings. In this study, test analysis was carried out for evaluating the degradation and failure mechanisms of coolant hose materials. Two kinds of EPDM rubber materials applicable to the hoses were adopted: commonly-used ethylene-propylene diene monomer(EPDM) rubbers and EPDM rubbers with high resistance against electro-chemical degradation (ECD). An increase of surface hardness and a large reduction of failure strain were shown due to the formation of oxidation layer for the specimens which had been kept in a high temperature air chamber. Coolant ageing effects took place only by an amount of pure thermal degradation. The specimens degraded by ECD test showed a swelling behavior and a considerable increase in weight on account of the penetration of coolant liquid into the skin and interior of the rubber specimens. The ECD induced material softening as well as drastic reduction in strength and failure strain. However EPDM rubbers designed for high resistance against ECD revealed a large improvement in reduction of failure strain and weight. This study finally established a procedure for reliability analysis and evaluation of the degradation and failure mechanisms of EPDM rubbers used in coolant hoses for automobile radiators.

• Archives of Reconstructive Microsurgery
• /
• v.25 no.2
• /
• pp.25-28
• /
• 2016

Purpose: Reconstruction of small defects of the dorsal fingers and toes is a challenging task. Although adipofascial flap is widely used for these areas, additional refinements are warranted. In this paper, we define the appropriate defect size in the finger and toes that can be treated with the adipofascial flap, refine its surgical indications and present a few surgical tips. Materials and Methods: Twelve patients with dorsal defects of the fingers and toes were treated with a random-type adipofascial turn-over flap and skin graft. If the defect area exceeded the size that could be covered by a conventional design, the flap base was designed in oblique or curvilinear fashion to lengthen the flap. For accurate defect coverage, the width of the flap base was designed in an asymmetrical shape depending on the defect configuration, varying the width from 0.3 to 1.0 cm, as opposed to the standard 0.5 to 1.0 cm width. Moreover, the lateral limit of the flap was defined as the lateral axial line. The size of the defect ranged from $3.0{\times}1.7cm$ to $1.5{\times}1.3cm$. Results: All flaps survived completely. Gliding function of the hand was well preserved and there was no evidence of tendon adhesion. Conclusion: The small defect in the dorsal finger and toe can be defined as less than one phalanx-length, measuring about $3.0{\times}2.0cm$ in size. If the defect exceeds this dimension, it is recommended that a different option be considered. We believe the adipofascial flap is an excellent option for treating small defects.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.20-30
• /
• 1990

In order to investigate the mechanism of the formation of clothing microclimate with different blouse designs and materials, physiological and subjective sensational changes were measured. Experimental clothing were four types of blouse made of $100\%$ cotton, $100\%$ regular polyes­ter, and $100\%$ hygroscopic polyester. Four types of box style blouse were with stand collar and long sleeve, with stand collar and sleeveless, with long sleeve and collarless, and sleeveless and collarless. Five healthy female were chosen as subjects. Experiments were carried out in the environ­mental chamber controlled at $28{\pm}1^{\circ}C$ , $70{\pm}5\%$ RH. and still-air condition for SO min. The skin temperature (9 spots), oral temperature, humidity inside chest, and subjective sensations were measured. Obtained results are: I) Material which is capable of absorbing sweat effectively and transfering moisture rapidly made a comfortable feeling, because cloth­ing humidity is increasing slowly at this material. 2) During exercise period, covered arms have more influenced on thermal comfort than a covered neck.

• Human Ecology Research
• /
• v.56 no.2
• /
• pp.167-174
• /
• 2018

This study investigated consumer innovativeness by examining a relationship model of innate innovativeness, product interest, product-specific innovativenss, and actualized innovativeness for eight product items as well as observed gender differences in the variables. The eight product items for the survey were smartphones, movies, clothing, cars, skin care products/cosmetics, traveling, AI products, and books. An online survey was conducted in January 2018, and 400 responses from male and female consumers in their twenties and thirties, were analyzed using reliability test, descriptive statistics, regression, and ANCOVA. The positive effect of innate innovativeness and product interest on product-specific innovativeness, and positive effect of innate innovativeness and product-specific innovativeness on actualized innovativeness were confirmed. Product interest was found to have a stronger power on product-specific innovativeness than innate innovativeness. Gender differences in product interest, product-specific innovativeness, and actualized innovativeness were identified as hypothesized. Female consumer's clothing interest, clothing innovativenss, and actualized clothing innovativeness were higher than male consumers; in addition, male consumer's cars and AI interest, cars and AI innovativenss, and actualized cars and AI innovativeness were higher than female's. The controversial results that indicated the higher innate innovativeness of male consumers useful to further in-depth discussion and research. This study contributed to the theory construction of consumer innovativeness research areas and offered practical implications for new product launching and customer relationship management.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2005

There are many methods to reinforce the cylindrical structure for light weight design like skin-stringer and semi-monocoque. Isogrid is one of the reinforced structures to improve buckling load. Isogrid has many advantages for complex load case, internal pressure and concentrated load.In this paper, compressive buckling test and non-linear FE analysis of the isogrid panel are described. Diameter of panel is 2.4m and thickness of plate is 11.43mm. The angle which the panel accomplish is about 70 degrees and, its height is about 660mm. Local buckling, global buckling and variation of stiffness after local buckling were observed during buckling test of the panel. MSC/MARC is used for non-linear FE analysis. When analysis, initial imperfection of panel which occurred during plastic forming is considered. The results of analysis for buckling mode and buckling load have good agreements with test.