• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.611-616
• /
• 2008

The investigation was accomplished on the test area in Forest Practice Research Center in order to compare Point Grid method with Bufferring method in process of the calculation of the Actual Mean Skidding Distance with the GIS aided harvesting method. the investigation site amounted to 264.9 ha in area and 32.67 m in the road density, 306.1 m in road spacing. the Net Correction Factor (Kn) was 1.53 in both sides skidding. the theoretical mean skidding distance was 72.52 m. the shortest mean skidding distance amounted to 149.57 m with point grid method and 139.68 m with Buffering methode. skidding distance correction factor (Kr) was 2.15. actual mean skidding distance amounted to 251.51 m and factor of wood assortment skidding (Kg) was 3.29. when the tractor (Dongyang) and tower yader (Koller 303) are used on investigation site, the logging cost is calculated 11,808 Won with Tractor below 25% slope and 12,336 won with Tractor between 25~55% slope, 10,020 won with Tower Yarder more than 55% slope.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.139-145
• /
• 1992

A planning method of optimum forest road was tested in the compartment II of Kangweon National University Forests by using a digital terrain model under four evaluation factors, i. e., minimum road length, average skidding distance, exploitative index, and ratio of inaccessible points. The results of the study were as follows : 1. Optimum forest road design based on the minimum road length was shown as 6035.6m, 12.73m/ha, 279.9m, 1.43, and 15.7% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 2. Optimum forest road design based on the average skidding distance was shown as 7828.5m, 16.52m/ha, 198.4m, 1.31, and 4.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 3. Optimum forest road design based on the exploitative index was shown as 7410.6m, 15.64m/ha, 210.9m, 1.26, and 5.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 4. Optimum forest road design based on the ratio of inaccessible points was shown as 8307.1m, 17.53 m/ha, 184.9m, 1.29, and 2.5% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2011

This paper investigates the accuracy of the vehicle pre-braking speed estimated based upon measured skidding distance. Driver ordinarily takes sudden braking when urgent situation is developed in the front or when the driver is involved in an unexpected situation, and the driver may be inflicted upon an accident depending on the required stopping distance. Among factors influencing the stopping distance of vehicle such as recognition response time of driver, performance of vehicle's braking device, and state of road surface etc, pre-braking speed is seemingly the most important influencing factor. Currently, in the investigating section of traffic accidents, the state of overspeed is determined by the pre-skidding speed calculated based on the length of skid mark. In order to identify the accurate cause of the accident, it is strongly recommended that estimation of pre-braking speed should be estimated taking into account speed reduction during transient time. In this study, we propose a method for estimating more accurate exact speed information of vehicle at the time of traffic accident. The outcomes from this study potentially help better understanding of the characteristics of vehicle for traffic safety in the future.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.83-90
• /
• 2012

Driver ordinarily takes sudden braking when urgent situation is developed or when the vehicle is involved in an unexpected accident. Therefore, the most common trace at a traffic accident scene is skid mark. Currently, in investigating traffic accident, overspeed is determined by the length of skid mark. However, in order to identify accurate cause of accident, estimation of pre-braking speed which takes into account speed reduction during transient time should be considered as a requirement. In a recent study, several ways to estimate pre-braking speed were suggested, but none considered to differentiate the decelerating transient brake section and skidding section. This study analyzed trends of decelerating transient brake section and skidding section by real braking test.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.195-203
• /
• 2011

Forest in the our country is in the age that needs positive operation in order to foster economical forest. Multiple operations for making valuable forest should be conducted steadily and timely from afforestation to harvesting. In order to execute these kinds of forest operations, the construction of skid trail network that can be effectively used as a pathway for forestry machine and working space is necessary. To investigate facility effect of skid trail network, we executed the location of skid trail network through centroid method by GIS for 50ha of harvesting workplace in mechanized model forest located in Hongcheon, Gangwon Province. As a result of this research, skid trail density in this area changed from 79m/ha with current method to 42m/ha with improved method. It appeared that skid trail density with improved method is nearly half of current method even though the cutting area is the same as the current cutting area. Also, skidding distance changed from 117m with current method to 57m with improved method. It appears that skidding distance with improved method is nearly half of current method even though cutting area was enlarged in adjacent tending cutting area.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.59-66
• /
• 2019

This study was conducted to evaluate the effect of the synthetic forest road network by calculating the optimal road density and layout of the forest road network in order to construct the systematic road network in the forested area. For this, five comparative routes were additionally planed and compared through evaluation indicators. As a result, the optimum road density of the study site was estimated to be 18.4 m/ha, and the synthetic forest road network was the best in the four indicators such as average skidding distance, standard deviation of skidding distance, development index, and circuity factor. In addition, the synthetic forest road network was comparable to the main road network by about 4 %p in the timber volume available and potential area size for logging, but the construction cost of the road was about 20 %p lower. It showed a synthetic forest road network was better in terms of economy.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.363-371
• /
• 1992

This study was aimed at developing a computer model to determine rational road networks in mountainous forests. The computer model is composed of two major subroutines for digital terrain analyses and route selection. The digital terrain model(DTM) provides various information on topographic and vegetative characteristics of forest stands. The DTM also evaluates the effectiveness of road construction based on slope gradients. Using the results of digital terrain analyses, the route selection subroutine, heuristically, determines the optimal road layout satisfying the predefined road densities. The route selection subroutine uses the area-partitioning method in order to fully of roads. This method leads to unbiased road layouts in forest areas. The size of the unit partitiones area can be calculated as a function of the predefined road density. In addition, the user-defined road density of the area-partitioning method provides flexibility in applying the model to real situations. The rational road network can be easily achived for varying road densities, which would be an essential element for network design of forest roads. The optimality conditions are evaluated in conjuction with longitudinal gradients, investment efficiency earthwork quantity or the mixed criteria of these three. The performance of the model was measured and, then, compared with those of conventional ones in terns of average skidding distance, accessibility of stands, development index and circulated road network index. The results of the performance analysis indicate that selection of roading routes for network design using the digital terrain analysis and the area-partitioning method improves performance of the network design medel.