• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.49-56
• /
• 2011

Estimating optimum hardware capacity of an e-learning system is very important process to grasp reasonable size of designing technique architecture and budget during step of ISP(information strategic planning) and development. It hugely influences cost and quality of the whole project. While investment on information system hardware has been continuously increased, there was no certified hardware capacity estimating method in e-learning system development. A guideline for hardware sizing of information systems was established by Telecommunication Technology Association in 2008. However, the guideline is not appropriate for estimating optimum hardware capacity of an e-learning system because it was designed to provide general standards for estimating hardware capacity of various types of projects. The purpose of this paper is to provide a methodology for estimating optimum hardware capacity in e-learning system development. To develop the methodology, this study, first of all, analyzes two e-learning development projects, in which the guideline was applied to estimate optimum hardware capacity. Then, this study finds out several key factors influencing on hardware capacity. Finally, this study suggests a methodology for estimating optimum hardware capacity of an e-learning system, in which weights for the factors are determined through AHP analysis.

• 한국의류학회지
• /
• 제43권3호
• /
• pp.416-426
• /
• 2019

This study measured and analyzed male firefighters hand sizes as well as suggested data for developing firefighting gloves with a good fit. Accordingly, body dimensions related to the hand were measured for 100 male firefighters. Twenty-three measuring items related to the hand and lower arm were selected. The firefighters' measurement data were compared to general adult male measurements from the 6th Korean Anthropometric data to analyze the hand sizes characteristics of firefighters. As a result, height, hand circumference, hand breadth, wrist circumference, elbow-wrist length, forearm-fingertip length and firefighter weight were significantly larger than adult males. A correlation analysis for 23 items was conducted to select items used as standards for setting a size when manufacturing firefighting gloves. Hand length and circumference were selected as representative hand parts for making firefighting gloves. Cross analysis between hand length and circumference were conducted to find the section showing the highest distribution ratio. As a result, the highest sections were between 19cm and 21cm for hand circumference and between 18.5cm and 19.5cm for hand length, which may be suggested as the most important ranges.

• 패션비즈니스
• /
• 제12권4호
• /
• pp.56-72
• /
• 2008

The purpose of this study was to provide with the useful fundamental data by developing the appearl sizing system according to body types for the Women's Wear Specifications(GB/T 1335.2-1997), National Standards of People's Republic of China. Thus, it was to improve of the garment fit and coverage rate for the apparel production assortment and stock of exporting domestic clothing to China. For this study, 581 female women aged in their twenties who lived in Beijing and Shanghai were selected for the development of the apparel sizing system who resident in Beijing and Shanghai in China. As for the method of this study was made three primary items(length, bust girth, waist girth) and seven secondary items. Data analysis were processed by SPSS WIN 10.0 Program was used. The research selected 3 major body measurements, such as stature, bust girth, waist girth and 7 secondary measurements to investigate the body features of the Chinese adult women. The data throughout the study were analyzed by using SPSS WIN version 10.0 S/W. The result were as follows: The clothes dimensions for upper and lower body and the coverage rate of body size that had the highest appearance ratio from the selected age group in 20's were: Y-type 160-84 155-64(5.9%) and the section 160cm 22.6%, A-type 160-80 160-62(39%) and the section 160cm 27.9%, B-type 155-80 155-66(6.2%) and the section 160cm 24.7%. The representative size codes of the Chinese adult women aged in their 20's were set for representing certain body dimensions such as 150-76A 150-60A(0.0%), 155-80A 155-64A(2.4%), 160-84A 160-68A(3.9%), 165-88A 165-72A(0.3%), 170-92A 170-76A(0.0%). The production coverage rates for the each representative size codes were S size the section 150cm 1.5%, M size the section 155cm 15.3%, L size the section 160cm 36.0%, XL size the section 165cm 29.7%, XXL size the section 170cm 11.4% that covered 93.9%.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• 복식
• /
• 제56권4호
• /
• pp.15-32
• /
• 2006

The purpose of this study is to research on the actual condition of production and selling in silver apparel market. For the questionnaire, 19 women's wear brands which were in higher ranking of sales in boutiques and madame-zone of department stores were selected. Pattern makers of each brand were questioned about 40 items for this research. The results of the questionnaire were as follows: 1) According to the result of the survey on the made-to-wear production of 19 ready-to-wear manufacturers, there was the gap was in ages between the target and the real consumer. Consumers of these brands were older and aged more broadly than their target ages. 2) Most of the consumers of silver-zone has thick waists, common heights, fat shapes. Custom-made clothes are ordered in many cases because of the big abdomen(50.0%) and H-shape(58.3%) of a somatotype. The body size variation of user population is needed for a good fit. 3) All brands(100%) of this research are using KS standards in the label of clothing, but they don't use these data in their production by reason of unawareness and distrust about these data. These inconsistency between the label and the real size of products may cause a confusion when consumers buy ready-to-wear. 4) Silver apparel manufacturers have need of anthropometry information and dummy(78.6%) suitable for their target consumers to increase their satisfaction about their apparel fit.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.484-492
• /
• 2016

High efficiency video coding (HEVC)은 H.264/AVC와 같은 이전 비디오 압축 표준 보다 더 높은 압축 효율을 갖는 최신 비디오 압축 표준이다. 화면 내 예측에서 최대 압축 단위 (LCU)들은 quadtree 구조를 통해 64x64부터 8x8까지의 크기를 갖는 더 작은 압축 단위 (CU)들로 나누어지고, 이들은 다시 예측 단위 (PU)들로 나누어진다. 가능한 크기까지 CU를 분할하면서 RDO (Rate Distortion Optimization) 과정을 통해 최적의 CU 분할 형태가 선택된다. 이 과정에서 HEVC는 많은 계산량을 필요로 한다. 본 논문에서는 HEVC의 계산량을 줄이기 위해, FAST (Features from Accelerated Segment Test) 코너 검출을 이용하여 화면 내 예측을 위한 고속 CU depth 결정 방법 (FCDD)을 제안한다. 제안하는 방법은 기존의 HEVC와 비교하여 약 0.7%의 BDBR 만큼의 적은 압축 성능 감소와 함께 부호화기에서 약 53.73%의 계산 시간을 감소시켰다.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1092-1101
• /
• 2005

The purpose of this study is to analyze the size of ready-made clothing for elderly women and to evaluate their fit according to body type. Subjects were 33 women aged 60 and older, and they were classified by stature and drop index. The size of clothing which manufactured by four apparel brands were measured and compared with body size, and the size designation of four brands was compared. The questionnaire was carried out to subjects, and the size recognition and dissatisfaction with ready-made clothing were analyzed. The fitting test were carried out, and the subjects evaluated the fit of jackets and slacks of four brands. In the result of questionnaire, we found that subjects had little recognition about their clothing size. Subjects responded that they often felt dissatisfaction in their jacket length, sleeve length, shoulder width, bust girth, slacks, and waist girth. We found that each apparel brands had different sizing system and that even if the size designation of label was same, the clothing size was quite different. So the elderly women who didn't have so much knowledge about their own clothing size had a tendency to confuse with choosing proper clothing for themselves. In the wearer's evaluation, the significant difference in the degree of unsatisfaction were certified in several body parts according to wearer's body type. Especially, the degree of unsatisfaction in the case of subjects of having very small stature or very small hip was higher than other body types. From the result, we certified that it was necessary to consider the characteristics of each body type to increase the satisfaction of elderly women with clothing.

• 국제초고층학회논문집
• /
• 제8권2호
• /
• pp.101-106
• /
• 2019

Assessing the energy performance of supertall buildings often does not consider variations in energy consumption due to the change of environmental conditions such as temperature, pressure, and wind speed associated with differing elevations. Some modelers account for these changing conditions by using a conventional temperature lapse rate, but not many studies confirm to the appropriateness of applying it to tall buildings. This paper presents and discusses simulated annual energy consumption results from a 600 m tall skyscraper floor plate located in Dubai, UAE, assessed using ground level weather data, a conventional temperature lapse rate of $6.5^{\circ}C/km$, and more accurate simulated 600 m weather data. A typical office floorplate, with ASHRAE 90.1-2010 standards and systems applied, was evaluated using the EnergyPlus engine through the OpenStudio graphical user interface. The results presented in this paper indicate that by using ground level weather data, energy consumption at the top of the building can be overestimated by upwards of 4%. Furthermore, by only using a lapse rate, heating energy is overestimated by up to 96% due to local weather phenomenon such as temperature inversion, which can only be conveyed using simulated weather data. In addition, sizing and energy consumption of fans, which are dependent both on wind and atmospheric pressure, are not accurately captured using a temperature lapse rate. These results show that that it is important, with the ever increasing construction of supertall buildings, to be able to account for variations in climatic conditions along the height of the building. Adequately modeling these conditions using simulated weather data will help designers and engineers correctly size mechanical systems, potentially decreasing overall building energy consumption, and ensuring that these systems are able to provide the necessary indoor conditions to maintain occupant comfort levels.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.262-269
• /
• 2016

지하철 정거장면적의 규모를 세분화하여 분석한 결과 이용승객 실적을 기반으로 B수준으로 면적을 산정하면, 현재 건설된 면적대비 16.3%만으로도 고객의 이용 편익을 충족시킬 수 있다. 그리고 정거정별 위치와 지명도, 상징성, 하루 승 하차인원 등 역별 특성에 맞게 가중치를 부여하면, 현재면적의 18.6%만으로도 수요를 충족할 수 있는 것으로 추정되었다. 호선별로 보면 8호선의 과다면적이 가장 크고, 환승유 무별에서는 환승역이 비환승(일반)역보다 과다면적이 크게 추정되었다. 그리고 지하 심도별로는 21~30m인 역의 면적이 가장 과다하고, 승차인원별 추정에서는 1일 피크실적 1,000명 이하의 역들이 가장 과다면적이 큰 것으로 추정되었다. 정거장의 규모(면적) 산정방식을 단순화하고 규모를 슬림화(축소)하는 것이 시민들의 이동편리(동선, 이동시간)와 지하공간이동 안전에 유리하고, 초기투자비 절감 및 운영시 유지관리비용 절약에서도 효과적일 수 있다.