• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.22-24
• /
• 1996

Small size DC motor control method for portable drug delivery system has been developed to be used for the actuator of insulins pump. The control method gives the controllabilities both in high speed(40-50 revolution per second(rps)) DC motor drive and also in low speed(0.5-1rps). In low speed mode DC motor is controlled to act like stepping motor and in high speed to optimize power consumption. To control both mode modified bang bang control is suggested. Using this method small size DC motor(spec.) speed is controlled from 0.2 rps to 50 rps. Experimental setup is developed using micro-processor(PIC16C73, Micro Chips co., USA), motor turns checking circuitry, small size DC motor for pager(SM1012, Samhong co., Korea) and gear box. Results from experiment meet need for vailable load condition which is require for portable drug delivery system.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.44-54
• /
• 2024

In this study, the sizing systems of 40 unisex sweatshirt brands were analyzed to collect the size information needed to produce unisex clothing. Each size specification was compared with the body size distribution and percentiles of men and women aged 18 to 29. Depending on the brand, unisex sweatshirt sizes ranged from 1 to 8. Despite being unisex apparel, three brands offered only one or two sizes. Out of the brands surveyed, 50% were found to offer four or five sizes. Out of the 40 brands, 25 used letters such as "S," "M," and "L" to indicate the size designation. More than 92.5% of the brands included M and L, and the sizing system tended to focus on larger sizes such as XL and 2XL rather than smaller sizes such as XS and S. The size specifications of shoulder width, chest circumference, sleeve length, and total length were compared with the body size distribution and percentiles of men and women aged 18 to 29. The distribution of each size specification mostly appeared in a section larger than the men's body size. The size specifications of unisex sweatshirts were set close to or larger than men's sizes and hardly represented women's sizes. To increase consumer satisfaction with unisex clothing, establishing a size standard that could accurately reflect the body size distribution of men and women was found to be imperative. Such a size standard could also help each brand specify or diversify its target and differentiate itself with other brands.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.719-729
• /
• 2000

Prefetching aims at reducing memory latency by fetching, in advance, data that are likely to be requested by the processor in a near future. The effectiveness of prefetching is determined by how accurate the prediction on the needed instructions and data is. Most previous studies on prefetching were limited to proposing a particular prefetch scheme and its performance evaluation, paying little attention to theoretical aspects of prefetching. This paper focuses on the theoretical aspects of instruction prefetching. For this purpose, we propose a clairvoyant prefetch model that makes use of perfect history information. Based on this theoretical model, we analyzed upper limits on the prefetch prediction accuracies of the SPEC benchmarks. The results show that the prefetch prediction accuracy is very high when there is no cache. However, as the size of the instruction cache increases, the prefetch prediction accuracy drops drastically. For example, in the case of the spice benchmark, the prefetch prediction accuracy drops from 53% to 39% when the cache size increases from 2Kbyte to 16Kbyte (assuming 16byte block size). These results indicate that as the cache size increases, most localities are captured by the cache and that instruction prefetching based on the information extracted from the references that missed in the cache suffers from prediction inaccuracies

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.143-153
• /
• 2004

The Purpose of this study is provide fundamental data on a suitable sizes of ready-to-wear for women. The subjects of the survey were 300 female of 18 to 24 years old. They were measured direct anthropometry. Height, bust girth, waist girth and hip girth were grouped by KS interval. Data were analyzed by use of Cross Tab method. The results of this study were as follows. Body group of the anthropometric measurements were summed up as follows. Height was divided into 4 section(155-170), bust girth was divided into 7 section(76-94), waist girth was divided into 6 section(61-76) and hip girth was divided into 9 section(84-100). The characteristics of cross tab can be summarized as follows. Section with application ratio are 155-160cm of height, 82-85cm for bust girth, 64-70cm for waist girth and 86-94cm for hip girth. The sizes of high cover ratio of well-fitting jacket, dress, coat and one-piece was 17 sizes, well-fitting an upper garment and the whole body garment item except that was 16 sizes, and a lower garment was 21 sizes.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.586-606
• /
• 2023

This study initiated research aligned with the body positivity movement, aiming to explore size diversity for groups facing relative size discrimination due to their deviation from average body types. Using KS adult women's apparel dimensions as a reference, jackets were developed for women in their 20s to 30s who belong to the small petite-size (S[P]) category, which is characterized by a height under 155cm (petite) and a bust-circumference from 72cm to less than 82cm (small). Using 3D virtual-fitting, we conducted experiment-pattern production and refinement and subsequent real-fitting evaluations by participants to objectively validate aesthetics and comfort. The study's findings are as follows: First, utilizing a 3D virtual-fitting program by identifying 'creases' and 'garment pressure points' in the jacket appearance, experiment patterns were refined and real jackets were produced. This approach addressed challenges in recruiting participants with specific body types and allowed for efficient research in terms of cost and time. Second, through real-fitting evaluations, basic-fit and slim-fit jackets labeled as <79-88-150> were developed for the S(P) size. we presented 'size spec' and 'ease allowance' for jackets by waist fit. Both fits received positive evaluations with approximately 53.5cm sleeve length, and 11.7cm shoulder length. The ease allowances for the basic-fit jacket were approximately 9.2cm at the bust circumference, 12.8cm at the waist circumference, and 6cm at the hip circumference. Similarly, the slim-fit jacket exhibited ease allowances of about 4.8cm at the bust circumference, 4cm at the waist circumference, and 4cm at the hip circumference, receiving positive evaluations for aesthetics and comfort.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1442-1448
• /
• 2018

Objective: This study was conducted to evaluate the effect of different levels of total digestible nutrients (TDN) and sodium stearoyl-2-lactylate (SSL) supplementation on growth performance and blood and carcass characteristics in Hanwoo steers during the early fattening period. Methods: Sixty Hanwoo steers (average body weight, $333{\pm}36.4kg$) were randomly allotted to 3 treatments, with twenty steers per treatment, and ten steers per pen with a size of $80m^2$. Dietary treatments were as follows: CON, basal diet; treatment (TRT) 0.5, 0.5% down-spec of TDN with 0.1% SSL; TRT 1.0, 1.0% down-spec of TDN with 0.1% SSL. Results: The results demonstrated that average daily gain and feed efficiency increased with TRT 0.5 (0.85 kg and 11.68) vs CON (0.82 kg and 11.27) or TRT 1.0 (0.78 kg and 10.74), indicating that 0.1% SSL supplementation in the feed of early fattening steers may result in a saving of 0.5% TDN. No significant differences were observed amongst all treatments (p>0.05) for blood metabolite concentration and blood corpuscle values, which were all within the normally accepted range for healthy steers. Conclusion: Our study suggests that a TDN 0.5% down spec with 0.1% SSL supplemented feed may be effective and profitable for the early fattening period of Hanwoo steers without causing adverse effects.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.138-141
• /
• 1999

For the enhancement of communication system performance, high quality filters are required. Conventional metal filters made of copper can be substituted by high quality high temperature superconductivity(HIS) flms for better performance. In order to reduce the size of the filter for the integration of device in the limited area, we have fabricated hairpin type filters using pulsed laser deposition(PLD) technique. The superconducting YBCO thin films have been grown on MgO substrates by PLD with Nd:YAC laser. The YBCO films were patterned by conventional wet-etching process. We have compared YBCO filters and copper filters which were made with the same spec. Simulated and measured frequency responses reveal that HIS YBCO hairpin type bandpass filters show better performance than copper filters.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1582-1584
• /
• 2001

In ac plasma display(PDP), an image quality mainly depends on the contrast ratio. And the contrast ratio is affected by the driving condition and size of discharge cell. In this study, the electrical and optical characteristics during reset, address and sustain discharge were investigated as the height and width of barrier rib were varied in order to obtain the highest contrast ratio. As a result, the optimum rib height and width were 140${\mu}m$ and 600${\mu}m$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.619-625
• /
• 1998

Mn doped {{{{ {Zn {Ga }_{2 }O }_{4 } }} thin film phosphors were prepared on Si(100) wafers and ITO coated glass substrates by rf magnetron sputtering technique and the effects of the substrates dopant and the sputtering paramet-ers were analyzed, Changes of the oreintation were observed after annealine tratment. The grain size of {{{{ {Zn {Ga }_{2 }O }_{4 } }} : Mn thin film deposited on Si wafer was smaller than that on ITO/glass substrate which resulted in higher PL intensity. The PL spectra of Mn doped {{{{ {Zn {Ga }_{2 }O }_{4 } }} thin films showed sharp green luminescence spec-trum. According to CL spectrum it could be concluded that Mn ions acted as an actuator for green emission by substituting Zn atom sites.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.423-428
• /
• 2010

In the initial design phase of superscalar microprocessors, a performance model is necessary. A theoretic performance model is very useful since performance for various architecture parameters can be obtained by simply computing equations, without repeating simulations, Previous studies established theoretic performance models using the relation between the instruction window size and the issue width, with the penalties due to branch mispredictions and cache misses. However, the study was intended for unlimited number of functional units, which is insufficient for the real case application. This paper proposes a superscalar microprocessor theoretical performance model which also works for the limited functional units. To enhance the accuracy of our limited functional unit model, instruction dependency rates are employed. By using trace-driven data of SPEC 2000 integer programs as input, this paper shows that the theoretically computed performance of superscalar microprocessor with limited number of functional units is quite similar to the measured performance.