• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.1011-1018
• /
• 1992

A series of experiment has been performed on the spray characteristics in a cylindrical confined space with the injection pressure taken as a parameter. By using a single-hole patternator and the Malvern particle sizer, the spray mass flux, drop size and volume concentration distributions along the radial and axial directions were obtained ; the line-of- sight data by Malvern particle sizer have been converted to the ring-of-sight data by using the tomographical transformation techniqe. The experimental results show that, due to the restriction on the ambient gas entrainment by the wall boundary, the effective spray angle is increasing. The spray drops were measured to be smaller in the confined space because of a large number of floating small drops by recirculation of the gas phase and the breakup of large drops by the wall collision. Also the details on the flow behavior of the confined spray are discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제1권1호
• /
• pp.107-112
• /
• 1997

A series of reinforced concrete beams was tested to evaluate the flexural performance of the repaired RC beams. The key parameters for this study were the size and location of the patch, and the repair materials, including polymer, polymer-cementitious and cementitious materials. The repaired specimens failed by a typical flexural mode with minor interfacial bond failure. Beams repaired with polymer, polymer-cementitious and cementitious materials recover 100%, 91%, and 97% of the flexural strength respectively, while beams with cement mortar lose approximately 30% of the strength. Compared with the pressure injection techniques the specimens repaired with patching techniques show low flexural strength, with significant interfacial bond failure. Location and size of the repaired part do not affect the recovering performance. Interfacial behavior between repair and strengthening materials is the major influencing factor for the composite structures.

• 한국농공학회논문집
• /
• 제47권1호
• /
• pp.51-59
• /
• 2005

The settling rate of the dredged soil may vary with mineral composition, grain size distribution, initial con contration and salt concentration of suspension of the site. A series of settling column test was performed to investigate the settling rate characteristics of solid suspension material from dredging and reclamation. The settling rate of soil mixed with various size of particles depended on clay fraction which showed a inherent flux. A model was developed to predict the particle flux of mixed soil from the clay flux and its applicability was verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.946-949
• /
• 2003

In this paper, a DDFS(Direct Digital Frequency Synthesis)chip has been designed focusing on the reduction of ROM size and implemented using FPGA. When calculating the sine value for the input phase value, we used the Taylor series expansion approximation method to reduce the number of addresses of ROM. We also used the piecewise straight line approximation method, ie, the stored value int the ROM is the difference of the sine value and the straight line approximation. Using this method, we could reduce four bits for each ROM data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.509-525
• /
• 2015

Predicting residual strength of corroded plates is of crucial importance for service life estimation of aged structures. A series of nonlinear finite element method is employed for ultimate strength analysis of stiffened plates with pitting corrosion. Influential parameters, including plate thickness, type and size of stiffeners, pit depth and degree of pitting are varied and more than 208 finite element models are analyzed. It is found that ultimate strength is reduced by increasing pit depth to thickness ratio. Thin and intermediate plates have minimum and maximum reduction of ultimate strength with stronger stiffeners, respectively. In weak stiffener, reduction of ultimate strength in thin and intermediate plates depends on DOP. Reduction of ultimate strength in thick plates depends on thickness of plate and DOP. For intermediate plates, reduction for all stiffeners regardless of shape and size are the same.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.235-241
• /
• 1989

Static according tests were carried out on a series of amorphous TbFe thin films of various composition under a constant laser irradiation condition. Examination of recorded domain configurations by using polarizing microscope led to the categorization of domain characteristics into 3 distinctly different types; i.c., type A: circular domains with smooth boundaries, the size not sensitive to variation of bias field, type B: domains of irregular shape at low bias, the size increasing and the boundaries getting smoother and more circular with increasing bias field and type C: not recordable. Critical factor which distinguishes among each types was fond to be the relative magnitude of H and H of the film near T, regardless of constituent atomic species. Micromagnetical process of thermomagnetic recording cycle was analyzed scheniatically for each type.

• Communications for Statistical Applications and Methods
• /
• 제29권1호
• /
• pp.53-64
• /
• 2022

High dimensional time series is gaining considerable attention in recent years. The sparse vector heterogeneous autoregressive (VHAR) model proposed by Baek and Park (2020) uses adaptive lasso and debiasing procedure in estimation, and showed superb forecasting performance in realized volatilities. This paper extends the sparse VHAR model by considering non-convex penalties such as SCAD and MCP for possible bias reduction from their penalty design. Finite sample performances of three estimation methods are compared through Monte Carlo simulation. Our study shows first that taking into cross-sectional correlations reduces bias. Second, nonconvex penalties performs better when the sample size is small. On the other hand, the adaptive lasso with debiasing performs well as sample size increases. Also, empirical analysis based on 20 multinational realized volatilities is provided.

• 한국음향학회지
• /
• 제25권4호
• /
• pp.191-196
• /
• 2006

인간은 일반적으로 공간의 크기에 대한 정보를 시각에 의존한다. 그러나 청각적 경험이 중시되는 공연공간이나 다수의 음원을 활용하는 멀티미디어 환경 및 자동차의 캐빈 등에서는 시각적으로 큰 차이가 없는 상황에서도 제공되는 청취환경에 의해서 공간의 크기를 다르게 지각하게 된다. 본 연구는, 단일공연장내 상이한 위치에서 청각적으로 지각되는 공간의 규모를 청취실험을 통하여 측정 분석하였으며, 동일위치에서 측정된 건축음향파라메타와의 상관관계분석을 통하여 영향요인들을 살펴보았다. 실험결과, 공연장의 크기에 대한 청각적 인상은 음악적 명료도(clarity)에 의해 크게 좌우되며, 음원과의 거리, SPL등에 의해 영향을 받는 것으로 나타났다. 또한 각기 다른 4종류의 연주악기를 이용한 음향 선호도 평가결과, 성악을 제외한 오케스트라, 첼로, 플룻의 경우 공간적 규모감이 작은 것을 선호하였다. 반면, 성악의 경우 공간적 규모감과의 유의적인 상관관계가 나타나지 않았다.

• 한국지리정보학회지
• /
• 제20권4호
• /
• pp.1-14
• /
• 2017

본 연구에서는 퇴적암 유래 농경지 토양의 카테나의 정량적, 객관적인 해석을 위해 세부정밀토양도(축적 1:5,000)의 속성자료 중 토양통자료를 이용하여 지리정보시스템(ArcGIS, ESRI, US)과 R 통계분석프로그램을 이용하여 분석하였다. 분석에 사용된 토양통의 인접한 토양통 길이 산정을 위해 GIS 프로그램의 Buffer 기능을 이용하여 각 토양통에 폭 1m의 buffer을 형성하고 인접한 토양통들의 buffer 면적과 이를 이용하여 길이를 산출하였다. R 통계분석프로그램을 이용하여 각각의 토양통별로 인접한 토양통의 면적을 비율로 환산하고, 그 값을 기준으로 입체군집기준(Cubic Clustering Criterion)을 이용해 군집의 개수를 선정하였다. 군집의 수를 선정 후 인접 토양통의 비율을 이용해 군집분석을 수행하여 퇴적암 유래 농경지 토양들의 유사성 분석을 시도하였다. 군집분석 결과 퇴적암 지대별로 암석의 종류에 따라 입경분포가 다르게 나타나 사양질 토양은 주로 사암 모재, 식양질 토양은 혈암 모재, 미사식양질 내지 식질의 토양은 석회암 모재로 구별되어, 석회암 < 혈암 < 사암의 순이었다. 한편, 혈암유래 농경지 토양은 적색혈암과 회색혈암으로 구분되고, 적색혈암은 사양질과 식양질, 회색혈암은 식양질과 미사식양질이 주로 분포하는 것으로 나타났다. 토양연접군에 대한 정량적인 해석을 의미하며, 이러한 분석방법들을 통한 해석으로 토양통들의 입경분포, 특히 점토함량에 따른 연관성 분석을 할 수 있었고, 분포위치와 모암에 대한 연관성에 대해서는 보다 심도있는 연구가 필요할 것으로 보여진다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.206-218
• /
• 2005

Structural studies of series of 'as spun' and drawn PEEK fibers have been carried out using X-ray diffraction and optical microscopy techniques. The analysis of results suggest that fibers produced at a constant draw ratio with increasing draw temperatures show enhanced orientation and crystalline behaviour. The resolved equatorial and meridional traces provide additional structural parameters in terms of crystallinity, crystallite size, and crystallite thickness. It is concluded that drawing at a temperature below $T_g(i.e.,\;144^{\circ}C)$ results in poorly oriented non-crystalline materials, whereas drawing above $T_g$ results in highly oriented semi crystalline materials. Additional drawing proved to increase the overall orientation with slight improvements in lateral order of the chain molecules. Quantitative analysis revealed that the crystallite size increases with increasing drawing temperature. The results also revealed the increased crystallite size upon additional drawing. Crystalline orientation parameter, $_c$, suggests almost perfect orientation. In all cases, the amorphous orientation is found to be lower than the overall orientation parameter obtained from the optical birefringence. As a result of additional drawing, crystalline orientation was found to increase slightly but the increase in the orientation of non-crystalline material was found to be substantial. An average crystalline density was determined from the orthorhombic unit cell dimensions. It was found to vary as a result of processing conditions. It was also found that the value of the maximum birefringence shows heavy dependence on the chain conformation.