• 소성∙가공
• /
• 제12권2호
• /
• pp.94-101
• /
• 2003

For the optimal net shape forging of S semi-solid materials (SSM), it is important to predict the deformation behavior and defects of materials. Among these defects, liquid segregation is detrimental to produce products with good mechanical properties. Moreover, to apply a numerical method to thixoforging, it is very important to prevent a liquid segregation during forming process. The liquid segregation phenomena in deformation behavior of semi-solid material with variation of test specimen size were studied. The SSM compression tests were performed by dynamic material test system with a furnace. Stress-strain curves and microstructures of SSM were investigated, and Porosities were analyzed to evaluate the effects of experiment parameters on liquid segregation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.595-606
• /
• 2009

This paper presents the characteristics of stress transfer around carven due to cavern size and rock joint properties by laboratory model test. In order to perform this study, eight different scaled model tests were carried out according to excavation stage. The limited numerical analysis were also performed to verify the model test results. The amount of stress transfer around the cavern is increased and then decreased by longitudinal arching effect according to tunnel excavation. It is founded that the stress developed around the cavern during excavation is increased when the cavern size and joint orientation are increased. It is also investigated that shear behaviour (such as stress, deformation) developed around cavern is considerably depended on the characteristic of fill material, dip and direction of joints. It is suggested that the behaviour will be verified throughout the 3D numerical prediction.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.171-172
• /
• 2006

The effect of the preparation factors, such as the feeding mode and rate of raw materials, the reaction temperature and the surfactant on the size distribution of molybdenum trioxide particle were investigated by orthogonal test. The optimum conditions for the preparation of $MoO_3$ precursors are as following; opposite feeding fast, reaction temperature of $60^{\circ}C$ and adding dispersant.

• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.411-418
• /
• 2007

Sample size calculation is very important in clinical trials. In this paper, we propose sample size calculation method for non-inferiority trials using sample size calculation method suggested by Wang et al.(2003) based on Wilcoxon's rank sum test. Also, sample size comparison between parametric method and proposed method are presented.

• Communications for Statistical Applications and Methods
• /
• 제20권3호
• /
• pp.199-205
• /
• 2013

We employ sieve bootstraps for empirical likelihood tests in time series models because their null distributions are often vulnerable to the presence of serial dependence. We found a significant size refinement of the bootstrapped versions of a Lagrangian Multiplier type test statistic regardless of the bandwidth choice required by long-run variance estimations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1673-1675
• /
• 2006

As the manufacturing capacity needs for large size LCD TV shifts very fast into next generation, processing and test equipment makers face more difficult challenges in accommodating productivity, reliability and lead time of panel makers as well as the prerequisite of high process quality. In this paper, AKT will discuss its new innovative productivity solutions in PECVD (Plasma Enhanced Chemical Vapor Deposition), as the key thin film process system, and EBT (Electron Beam Test), as the key array test system, for the huge glass size with surface dimension larger than 2 meter by 2 meter.

• 패션비즈니스
• /
• 제9권5호
• /
• pp.15-36
• /
• 2005

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese adult female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. As a sample, 1360 female women was seleted aged between 19 and 50 who resident in Beijing and Shanghai in China for characterization body types and development of apparel sizing system by classifying them. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, ANOVA(t-test and F-test), factor analysis, duncan's multiple test. The results from the study were as follows: As they are getting older, the horizontal size and length categories related to width, thickness, and circumference increased, and the height and vertical size that show the vertical size of body reduced. 1. The women in the Shanghai area had large head width, head thickness and head circumference, the categories related to the height and head, and the women in the Beijing area had larger in terms of width, circumference, length, angle and other categories. 2. Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1 : constitutional obesty and width size, factor 2 : longistudinal body size, factor 3 : shoulder form and size, factor 4 : longistudinal upper body size, factor 5 : longistudinal under body size, factor 6 : shoulder dropping.

• 대한가정학회지
• /
• 제40권8호
• /
• pp.183-190
• /
• 2002

This study was aimed at investigating the satisfaction in relation to clothing design and size-fit for nurse uniform in Korea. The subjects were 986 female nurses working in 12 hospitals selected by convenience sampling. The data were collected by questionnaires. Using SPSS package, frequency, percentage, t-test, ANOVA and SNK test were conducted. The results were divided into 2 categories as fellows; 1) Results of the satisfaction with the size-fit and size system of the nurse uniforms : Nurses satisfied at the individual size-fit system than ready-made size system. There was a considerable difference of the satisfaction with the size-fit depending on age and clinical career. And more than half of nurses were needed the concrete and precise size system. 2) Results of the actual design condition and clothing satisfaction : Nurses wore two-piece pants suits more than classical designed one-piece style. The princess-line, convertible collar and yoke design were preferred for nurse uniform with the high satisfaction. 41.6 percent of respondents used the cap obligatory and the white color and a patterned textile were generally used. The used fabrics were only polyester and cotton/polyester mixed spinning.

• 한국농공학회지
• /
• 제30권2호
• /
• pp.82-94
• /
• 1988

The purpose of this study is to introduce the Double Punch test method which is an indirect testing method of tensile strength of concrete, and to compare with the tensile strength of concrete as determined by the split-cylinder test, a practical method for performing the Double Punch test to obtain the tensile strength of concrete is proposed and recommended for general use. In this study, the dimensions of cylindrical specimens used in the Double-Punch test were 15X30cm, 15X15cm, 10${\times}$(20cm, and 5${\times}$l0cm, and in the split-cylinder test were 15${\times}$(30cm, 15${\times}$(15cm, and 10${\times}$(20cm. And the diameters of loading punches used in the Double-Punch test were 1.5cm, 2.5cm, and 3.5 cm. The results obtained from tests are summarized as follows ; 1. In the split-cylinder test, the tensile strength of concrete by the linear elasticity theory is similar to that of plasticity theory. 2. Both split-cylinder test and Double-Punch test, tensile strength of concrete is increased with decreasing specimen size. This tendency is identical when the ratio of specimen diameter to height is 1: 2, but that tendency is quite different when the ratio is 1: 3. In the Double-Punch test, if specimen size is constant, by increasing the punch size, tensile strength of concrete is increased, too. 4. Using a 15 ${\times}$( 15 cm cylinder specimen and 3.5 cm diameter punch in the Double Punch test would give the most uniform and consistent result in tensile strength, and the result showed a gQod correlation with splitting tensile strength from 15 x 30cm specimen. 5. In order to obtain satisfactory results and to nuninuze variability, it is proposed that specimens of 15 cm in diameter and 15 cm in height with two 3.5 cm diameter punches should be used. It seems, therefore, reasonable tt) take f't=0.0024 P(kg / cm$^2$) as a working formula for computing the tensile strength in the Double Punch test for concrete.

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.102-111
• /
• 2014

목적: 본 연구의 목적은 air-blasting particle size를 달리하고 분사 압력과 시간을 통상보다 크게 증가시켜 표면에 큰 손상을 유발한 군을 상대적으로 작은 손상을 유발한 군과 비교하여 파절 저항과 접착 강도 차이를 보이는지 평가하는 데 있다. 연구 재료 및 방법: 지르코니아($LAVA^{TM}$) 디스크 표면에 각각 $30{\mu}m$- particle size (Cojet) 2.8 bar 15초, $110{\mu}m$- (Rocatec) 2.8 bar 15초, $110{\mu}m$- (Rocatec) 3.8 bar 30초로 조건을 달리하여 표면처리 후 각각 이축 굽힘하중 강도 실험과 접착 파절 하중 실험을 실행하였다. 접착은 상아질 유사 베이스에 $200{\mu}m$ 두께의 레진시멘트로 시행하여 인장력을 극대화하였으며 음향방출(AE) 센서로 실패하중을 검출하였다. 결과: 이축 굽힘하중 강도, 접착 파절하중은 세 군간 서로 유의성 있는 차이를 보이지 않았다(P > 0.05). 접착 시편의 균열은 대부분 radial crack이었다. 결론: 정하중 평가의 한계 내에서, air-blasting particle size와 압력에 의한 표면 손상은 크지 않았으며, 접착 파절하중 평가는 표면 손상과 접착 강도를 동시에 평가할 수 있는 방법이라 여겨진다.