• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1905-1913
• /
• 2011

The dynamic characteristic of bogie that is driving system of railway vehicle is very important regarding decision of vehicle characteristics as running safety and comport. The dynamic characteristic test of bogie is tested on full size in place on field testing on track. But, the testing on the full size caused many problems. To overcome these problem by full size test, the Railway Safety Research Center in Seoul National University of Science & Technology developed 1/5 scale size of small scale derailment simulator and is currently testing running stability of 1/5 scaled bogie. Also To take effectively advantage of running stability test using small scale derailment simulator in actuality design and reliability estimation, it is necessary comparison and examination with field test and theoretical analysis result In this paper. to achieve running stability analysis of 1/5 scaled bogie on small scale derailment. the program using MATLAB that is fast compose and analysis the motion equation of Saemaul power bogie is developed. It is achieved analysis according to various specification (weight, size, suspension, etc..) and is evaluated corelation between test result and dynamic characteristic of actual railway vehicle.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1109-1114
• /
• 2008

To investigate the effect of sample size on coefficient of consolidation of non-homogeneous soil, the result of a large size consolidation test using a huge undisturbed sample with $1200mm(D){\times}2000mm(H)$ in dimension is compared with that of oedometer test using undisturbed small sample. In addition, test results are compared with those of same test using remold sample. Experimental results show that, due to the lump of sand/silt was mixed in sample, the coefficient of consolidation of undisturbed samples have a difference for each tests. Whereas, the difference of coefficient of consolidation between remolded large and small samples is not found. Because sample size affects the test results, sample must be carefully selected for non-homogeneous soil.

• Industrial Engineering and Management Systems
• /
• 제11권2호
• /
• pp.196-201
• /
• 2012

This study has developed a packaging criterion to minimize the level of discomfort which drivers using their vehicles for daily life purposes may experience due to ill designed vehicle packaging of mid-size sedan based on users' daily-life scenario. To find out optimal range of packaging dimension criterion, discomfort levels the test participants with different physical conditions suffer while performing various activities were analyzed. One hundred two test participants were carefully selected to represent entire Korean mid-size sedan owner-drivers. They were directed to test drive on the course designed to simulate mid-size sedan daily-usage scenario. At pre-designed locations, each of questions was asked to the test participants to be answered in the form of 10 point discomfort level score. By analyzing the test results, the optimal range for packaging dimensions was defined to be used as a packaging criterion.

• 복합신소재구조학회 논문집
• /
• 제7권1호
• /
• pp.1-8
• /
• 2016

In this paper, the full-size structural performance test for a lightweight soundproof tunnel composed of partitioned pipe truss members is carried out to investigate the structural performance. In addition, a nonlinear structural analysis of the same finite element model as the full-size testing model is performed to compare the test result. The test and analysis results showed that the lightweight soundproof tunnel ensures the structural safety against wind loads, snow loads and load combinations. As a result, the full-size test and analysis results meet all the design load conditions, hence the proposed lightweight soundproof tunnel is ready for the field application.

• 대한수의학회지
• /
• 제48권4호
• /
• pp.457-462
• /
• 2008

The objective of this study was to determine appropriate sample size that simulated different assumptions for diagnostic test characteristics and true prevalences when designing serological surveillance plan for pullorum disease and fowl typhoid in domestic poultry production. The number of flocks and total number of chickens to be sampled was obtained to provide 95% confidence of detecting at least one infected flock, taking imperfect diagnostic tests into account. Due to lack of reliable data, within infected flock prevalence (WFP) was assumed to follow minimum 1%, most likely 5% and maximum 9% and true flock prevalence of 0.1%, 0.5% and 1% in order. Sensitivity were modeled using the Pert distribution: minimum 75%, most likely 80% and maximum 90% for plate agglutination test and 80%, 85%, and 90% for ELISA test. Similarly, the specificity was modeled 85%, 90%, 95% for plate agglutination test and 90%, 95%, 99% for ELISA test. In accordance with the current regulation, flock-level test characteristics calculated assuming that 30 samples are taken from per flock. The model showed that the current 112,000 annual number of testing plan which is based on random selection of flocks is far beyond the sample size estimated in this study. The sample size was further reduced with increased sensitivity and specificity of the test and decreased WFP. The effect of increasing samples per flock on total sample size to be sampled and optimal combination of sensitivity and specificity of the test for the purpose of the surveillance is discussed regarding cost.

• 한국지반공학회논문집
• /
• 제23권2호
• /
• pp.19-27
• /
• 2007

본 연구에서는 한국산업규격에서 제안하고 있는 건식방법과 습식방법을 이용하여 국내 플라스틱배수재 필터로 가장 많이 사용하는 토목섬유 3종류의 유효구멍크기를 평가하고, 시험 수행 과정에서 나타난 각 시험 방법의 특징과 시험 결과를 비교 분석하였다. 시험 결과에 의하면, 건식방법은 신속하고 간단한 시험방법이지만 상대적으로 많은 오차가 발생하는 등 좋지 않은 방법으로 나타났다. 반면에, 습식방법은 정전기 발생이나 섬유 내의 갇힘 현상 등 건식방법에서 나타나는 많은 오차를 줄일 수 있는 방법으로 판단되었다. 그러나 습식방법의 한 방법인 KS K ISO 12956의 경우, 시험에 오랜 시간이 소요되며 시험 중 사용 흙의 손실에 대한 기준이 매우 까다로운 것으로 나타났다. 일반적으로 습식방법으로 구한 토목섬유의 유효구멍크기는 건식방법으로 구한 유효구멍크기보다 작은 것으로 나타났으며, 특히 현재 사용하지 않는 방법인 수리동역학적인 방법 KS F 2126로 구한 유효구멍크기는 KS K ISO 12956방법으로 구한 유효구멍크기와 비슷하거나 작은 것으로 나타났다.

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.29-36
• /
• 1987

초기균열을 갖는 대부분의 구초체는 부재크기가 증가함에 따라 강도가 저하한다. 이러한 현상을 크기효과(size effect)라고 한다. 유리, 금속, 콘크리트 동, 구조재료중에서 콘크리트는 비록 초기균열이 없더라도 이 size effect 현상을 보인다. 현존의 크기효과 법칙에 따르면 매우 큰 콘크리트 구조체는 거의 하중을 저하할 수 없다. 그러나 실제로는 초기 균열이 없는 경우 상당한 크기의 응력을 저항할 수 있다. 이러한 현상은 매우 큰 구조체와 작은 구조체는 강도기준의 적용이 합당하고, 그 중간 크기의 구조체는 비선형파괴역학의 적용이 합당함을 말한다. 이 논문에서는 비선형파괴역학에 근거하여 유도된 실험식에, 기존의 실험치를 이용하여 비선형회귀분석올 행하여 실험상수를 정함으로써 일축압축, 할열(splitting)인장 및 전단강도에 대한 실험식을 제시한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.371-376
• /
• 1998

In this study, the size effect of concrete members subjected to the axial load and bending moment is investigated using a series of C-shaped specimens of which test procedure is similar to those of Hognestad, Hanson, and McHenry's. Main test variable is a size ratio of the specimens(1:1/2:1/4) at the concrete compressive strength of 500kg/㎠. Test results show that the flexural compression strength at failure decreases as the size of specimen increases, that is, the size effect law is present. Model equation is derived using regression analyses with experimental data and it is compared with formulas for compressive strength of cylinders and shear strength of beams without stirrups. Size effects is distinct th following sequence; shear strength of beams without stirrups, compressive strength of C-shaped specimens, compressive strength of cylinders.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 1997

For the optimal net shape forging of semi-solid materials (SSM), it is important to predict the deformation for variation of strain rate. It should be necessruy to conduct a formation of stress-strain curve in semi-solid alloys for analysis of the thixoforming process. Particularly, important problem to application of computer aided engineering in SSM processing is to prevent a segregation of liquid component during compression process. The liquid segregation is studied as multistage change of the strain rate and test piece size to prevent the liquid segregation during the compression process. The compression test for semi-solid aluminium alloy with a controlled solid fraction is performed by dynamic material test system with a furnace. Moreover morphology of structure and fraction of pore are investigated through compression test.

• Advances in environmental research
• /
• 제5권3호
• /
• pp.201-211
• /
• 2016

Laboratory tests were conducted to evaluate the performance of waste rubber shreds in leachate collection layer of engineered landfills. The study found that waste rubber shreds layer in combination with a gravel layer can be of potential use in landfill drainage system. To study the performance, conventional gravel along with waste rubber shreds were used in different combinations (with total layer thickness = 500 mm) as leachate collection media. For the laboratory study poly vinyl chloride (PVC) pipes were used. The size range of waste rubber shreds used were 25 mm to 75 mm in length and width = 10 to 20 mm. The gravel size used in the leachate collection media is 10 mm to 20 mm size. Performance study of 7 Test Cols. with different combinations of waste rubber shreds and gravel bed thickness were studied to find out the best combination. The study found that the Test Col.-3 having waste rubber shreds thickness = 200 mm and gravel layer thickness = 300 mm gave the best results in terms of percentage removal in various physicochemical parameters present in the leachate. Further to find the best size rubber shreds three more Test Cols - 8, 9 and 10 were constructed having the rubber shreds and gravel layer ratio same as that of Test Col.-3 but having rubber shreds width = 10 mm, 15 mm and 20 mm respectively. Based on the results obtained using Test Cols. 8, 9 and 10 the study found that smaller size rubber shreds gave bests results in terms of improvement in various leachate parameters.