• Journal of Periodontal and Implant Science
• /
• 제53권5호
• /
• pp.388-401
• /
• 2023

Purpose: This study investigated the accuracy of free-hand implant surgery performed by an experienced operator compared to static guided implant surgery performed by an inexperienced operator on an anterior maxillary dental model arch. Methods: A maxillary dental model with missing teeth (No. 11, 22, and 23) was used for this in vitro study. An intraoral scan was performed on the model, with the resulting digital impression exported as a stereolithography file. Next, a cone-beam computed tomography (CBCT) scan was performed, with the resulting image exported as a Digital Imaging and Communications in Medicine file. Both files were imported into the RealGUIDE 5.0 dental implant planning software. Active Bio implants were selected to place into the model. A single stereolithographic 3-dimensional surgical guide was printed for all cases. Ten clinicians, divided into 2 groups, placed a total of 60 implants in 20 acrylic resin maxillary models. Due to the small sample size, the Mann-Whitney test was used to analyze mean values in the 2 groups. Statistical analyses were performed using SAS version 9.4. Results: The accuracy of implant placement using a surgical guide was significantly higher than that of free-hand implantation. The mean difference between the planned and actual implant positions at the apex was 0.68 mm for the experienced group using the free-hand technique and 0.14 mm for the non-experienced group using the surgical guide technique (P=0.019). At the top of the implant, the mean difference was 1.04 mm for the experienced group using the free-hand technique and 0.52 mm for the non-experienced group using the surgical guide technique (P=0.044). Conclusions: The data from this study will provide valuable insights for future studies, since in vitro studies should be conducted extensively in advance of retrospective or prospective studies to avoid burdening patients unnecessarily.

• 한국방사선학회논문지
• /
• 제15권4호
• /
• pp.525-531
• /
• 2021

양전자방출단층촬영기기의 검출기는 다수의 섬광 픽셀과 다수의 광센서를 사용하여 구성된다. 다수의 광센서를 사용함으로써 비용이 증가하고 신호처리가 복잡해진다. 본 연구에서는 적은 수의 광센서를 사용하여 비용의 감소와 간결한 신호처리가 가능한 검출기를 설계하였다. 섬광 픽셀과 적은 수의 광센서를 사용하고 모든 광센서에 빛을 전달하기 위해 광가이드를 사용하였다. 섬광 픽셀과 광가이드에는 광센서로 최대한의 빛을 전달하기 위해 반사체를 적용하였다. 반사체는 난반사체 및 거울반사체를 사용하였으며, 광가이드의 두께를 다르게 적용하여 평면 영상을 획득하였다. 획득된 평면 영상의 비교 분석을 통해 최적의 조합을 선택하였다. 그 결과 섬광 픽셀과 광가이드 모두 거울반사체를 사용하였을 경우, 모든 두께의 광가이드에서 우수한 평면 영상을 획득하였다. 광가이드는 섬광 픽셀의 영상이 형성된 지점의 분석 및 영상의 크기를 고려하여 3 mm 두께를 사용할 경우 최적의 영상이 획득되는 결과를 도출하였다.

• 한국방사선학회논문지
• /
• 제16권3호
• /
• pp.249-255
• /
• 2022

소동물용 양전자방출단층촬영기기는 매우 작은 장기를 영상화하기 위해 매우 높은 공간분해능을 지닌다. 우수한 공간분해능을 획득하기 위해서는 매우 작은 섬광 픽셀을 사용하여 시스템을 구성해야 한다. 매우 작은 섬광 픽셀을 사용하여 검출기를 구성할 경우 광센서 픽셀에 따라 적용가능한 배열의 크기가 달라진다. 이전 연구에서 광센서 크기에 따른 최대의 섬광 픽셀 배열을 찾는 연구를 수행하였다. 본 연구에서는 더 확장된 섬광 픽셀 배열을 사용하여 검출기를 구성하기 위해 광가이드를 적용한 검출기를 설계하여 모든 섬광 픽셀들이 영상화되는 최대의 배열을 찾고자 한다. 섬광체로 이루어진 검출기의 시뮬레이션이 가능한 DETECT2000을 사용하여 검출기를 설계하였다. 11 × 11 섬광 픽셀 배열에서부터 16 × 16 배열까지 검출기를 구성하여 시뮬레이션을 수행하였다. 섬광 픽셀에서 발생된 빛을 광센서로 수집하여 평면 영상을 획득한 후 영상의 분석을 통해 겹침이 발생하지 않는 최대의 배열을 찾았다. 그 결과 겹침이 발생하지 않고 모든 섬광 픽셀들이 구분 가능한 최대의 배열은 15 × 15 배열이었다.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.58-62
• /
• 2005

Flow characteristics at secondary recirculation zone in a liquid fuel ramjet combustor were investigated using CFD and Stereoscopic PIV method. The combustors have two rectangular inlets that form 90 degree each other. Three guide vanes were installed in each rectangular inlet to improve the flow stability. The tested angle of the air intakes was 60 degree. The experiments were performed in the water tunnel test with the same Reynolds number in the case of Mach 0.3 at inlet. The computational and experimental results showed that the secondary recirculation flow occurred at the front junction of inlet main stream and combustor chamber. The size of secondary recirculation regions are increased with approaching closer to the center of the combustor. Since the performance of combustor is closely dependent not only on the main recirculation in the dome region but also on the secondary recirculation flow in a junction region, the optimal angle of the air intakes should be considered the recirculation size as frame holder.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.115-120
• /
• 2003

Flow characteristics at secondary recirculation zone in a liquid fuel ramjet combustor are investigated using CFD and 3-D Stereoscopic PIV method. The combustors have two rectangular inlets that form 90 degree each other. Three guide vanes were installed in each rectangular inlet to improve the flow stability. The tested angle of the air intakes was 60 degree. The experiments were performed in the water tunnel test with the same Reynolds number in the case of Mach0.3 at inlet. Both computational and experimental results showed the secondary recirculation flow occurred at the front junction of inlet main stream and combustor chamber. The size of secondary recirculation region increased with upon closer center of axial combustor. Since the performance of combustor depends on not only the main recirculation in the dome region but also the secondary recirculation flow in a junction region, the optimal angle of the air intakes should consider the recirculation size as frame holder.

• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.11-18
• /
• 2008

최근 국내외에서 역학적-경험적 설계법의 개발 및 이의 활용을 위한 각종 연구가 매우 활발하게 진행중에 있다. 미국의 경우 AASHTO 2002 설계법, 우리나라의 경우 한국형 도로포장설계법의 개발이 진행 중에 있고, 개발되는 설계법에 도로포장재료의 역학적 물성치 평가가 상당히 중요한 역할을 하도록 구성되어 있다. 따라서 설계법에 이용될 국내 아스팔트 혼합물의 재료물성의 평가가 매우 시급한 실정이다. 설계법에 이용되는 재료 물성을 평가하는 방법 중 최근에 많이 적용되는 방법이 동탄성계수 실험이다. 동탄성계수는 다양한 온도조건, 하중, 속도를 이용하여 다양한 교통조건을 반영할 수 있다. 사용된 골재의 입도, 아스팔트 바인더에 따라서 변화하며, 특히 아스팔트 혼합물의 점탄성적인 특성을 잘 묘사할 수 있는 물성치 평가방법이라고 할 수 있다. 본 연구에서는 아스팔트 혼합물에 사용되는 골재의 공칭최대치수 및 입도분포와 동탄성계수와의 상관관계를 규명하는 것이다. 국내의 실험장비 조건을 고려할 때, 시편의 직경 및 높이는 100mm 및 150mm를 이용하는 것이 바람직하다. 또한, 골재의 공칭최대치수가 커짐에 따라 동탄성계수가 증가하는 경향을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.173-176
• /
• 2000

we analyzed multiple ray tracing in the highly scattering optical transmission(HSOT) polymer plate by means of the Monte carlo simulation. Light transmission behavior in the light guide was simulated by a 3-dimensional ray tracing program considering scattering angle given by the Mie theory and mean free path. To improve the uniformity of the conventional HSOT backlight unit, We employed additionally dot patterns. For the proposed structure, we calculated the light transmission behavior and obtained a bright and uniform backlight unit for a large size LCD panel of more than 12 inch.

• 대한한방내과학회지
• /
• 제18권1호
• /
• pp.62-68
• /
• 1997

Dysphagia generally has a good prognosis after stroke involving cerebral hemisphere or braibstem, but it could have serious consquence with dehydration leading to haemoconcentration, renal failure and aspiration leading to pneumonia. This preliminary report was written for main report. The main report will be written to give an objective guide post of management and treatment in stroke patient with dysphagia. The objective guide posts were follows as, 1. Close examination for relationship between dysphagia in stroke patients and other neurological deficits 2. Influence on the prognosis of dysphagia in stroke patients by the grade of dysphagia at admission time. 3. The realtionship between the site and size of brain damage and the grade and prognosis of dysphagia 4. The frequency and prognosis of dysphagia in stroke patients according to sex and age. 5. The rate and speed of recovery with dysphagia after stroke. 6. Frequency and process of complications, aspiration pneumonia, weight loss, sore, in stroke patient group with dysphagia.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 1995

So far,in deep drilling process there are several manufacturing problems such as hole deviation, hole over size, circularity,straightness and surface roughness. Whit regard to these problems, we atudied the abrasion process on carbided tip of BTA drill and got the follow test results through the abrasion characteristic test and analysis on cutting mechanism for the drill tooth and guide pad. 1) In SM55C drilling process, the most stable and reasonable drilling speed range for optmum abrasion characteristic of drill tooth was 60m.min. 2) The total drilling torque was about 60kg .deg.cm on condition drilling speed 60m/min and 0.15mm/rev. These results show that the theoretical burnising torque is well accord with the tested torque which is working on guide pad.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.880-882
• /
• 2002

We have proposed a novel optical design technique of light-guide plates(LGPs) which can able to improve the optical efficiency of transflective LCDs. The basic concepts of our design technique are that we make the groove-pattern of LGP pixels resemble the pixel-array-pattern of transflective LCDs in shape and size and make the surface of the groove scatter (front scattering). In simulated and measured results, we ensure that our design of LGP in backlight unit for transflective LCDs can improve the optical efficiency of LCDs.