• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.285-291
• /
• 2002

The shearing process for the sheet metal is normally used in the precision elements such as a frame of TFT-LCD or lead frame of If chips. In these precision elements, the burr formation prevents the system assembly and needs the additional burr removing process. In this paper, we developed the small size NC punching system which has an aligning kinematics between the rectangular shaped punch and die. The punch is driven by an ai cylinder and the sheet metal is moving on the X-Y table system which is driven by two stewing motors. The microprocessor control the whole system and communicate with the monitoring PC by RS232C serial communication protocol. The graphic user interface program in PC monitors nil control the punching system. The cross shaped joint hinge supports the punching die and positioned by two differential screws, whose are installed in perpendicular directions. The aligning between the punch and die is performed using the sheets of half thickness(0.1mm Brass) of the real process for the frame of the TFT-LCD. Using half thickness Brass, the burr formation is magnified and we can decide the aligning direction more easily then using the real thickness(0.2mm) Aluminum. In this paper, the aligning results are measured manually using the SEM photographs and we hope to make the automated aligning procedures using some kinds of image processing techniques.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.28-29
• /
• 2000

Optical power splitters and/or couplers are important components for optical signal distribution between channels both in wavelength division multiplexing(WDM) systems and photonic integrated circuits(PICs). Since polarization is usually not known after propagation in an optical fiber, passive WDM components have to be polarization insensitivity, Compared to alternatives such as directional couplers or Y-junction splitters, splitters based on multimode interference(MMI) have found a growing interest in recent yens because of their desirable characteristics, such as compact size, low excess loss, wide bandwidth, polarization independence, and relaxed fabrication tolerances$^{(1)}$ . These devices have been fabricated in polymers, silica, or III-V semiconductor materials. A1 $\times$ 4 MMI power splitter on InP materials that were suitable for application in the 1.55-${\mu}{\textrm}{m}$ region$^{(2)}$ . However, the fabrication process of the structure is too complicated and the photolithography tolerance is very tight. Also, a 1 $\times$ 16 InGaAsP/InP MMI power splitter with an excess loss of 2.2dB and a splitting ratio of 1.5dB was demonstrated by using deep etching$^{(3)}$ . The deep etching of the sidewalls through the entire guide layer of the slab waveguide resulted in a number of drawbacks$^{(4)}$ . (omitted)

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.529-538
• /
• 2002

최근, 경제적 이점과 전단강도의 증가효과로 인하여, 파형판의 사용이 증가하고 있다. 하지만, 일반적인 평판에 대해서는 현재거의 모든 시방서에 설계기준이 제시되어 있으나, 파형판의 전단강도에 대한 규정은 제시되지 않은 실정이다. 따라서 설계자가 파형판을 설계할 수 있도록 참고할 수 있는 규정이 필요하다 할 수 있다. 본 연구에서는 수치해석 방법에 의해 파형판의 여러기하 조건에 따른 전단강도의 관계를 알아보았으며, 수치해석에는 8절점 박판 쉘요소를 사용했다. 수치해석을 통하여 파형판에 있어서 파형의 크기, 곡률, 파형판의 두께에 따라 전단강도를 결정할 수 있는 식을 제안하였으며, 제안식은 파형판이 일반적인 평판에 비해 상당히 큰 전단강도를 갖는다는 것을 보여준다.

• 신재생에너지
• /
• 제16권2호
• /
• pp.35-46
• /
• 2020

Recently, turbines operating in hydro power plants are required to undergo renovation and modernization due to their age exceeding 30 years. In the process of renovation or modernization, a performance test of the scaled-down model is necessary to verify the performance of the real-size model. This model test method, with criteria that is similar to that of a real turbine, is the most economical and important method. Furthermore, the shapes of the runner and guide vane can be modified or replaced easily. However, during the process of modernization, the components with the spiral casing and draft tube are impossible to repair or replace because of the buried ground. Thus, in this study, numerical analysis is conducted to investigate the hydraulic performance based on the difference between the two-dimensional computer-aided design (CAD) shape and the real three-dimensional scan shape of the spiral casing and draft tube.

• International Journal of Human Ecology
• /
• 제9권2호
• /
• pp.93-105
• /
• 2008

This study investigates the different characteristics (mainly of community life) in representative intentional communities, between the ecovillage and cohousing, since the different purpose of the establishment of the community might result different characteristics. The study method is data analysis: the analysis material is Community Directory, A Comprehensive Guide to Intentional Communities and Cooperative Living (Rutledge, 2005). Of 750 listed communities, 397 (211 ecovillages and 186 cohousings) communities were analyzed. The findings of the study reveal that there are clear differences of community life between ecovillages and cohousings even though two communities are regarded as similar intentional communities. The similarities between the two communities are as follows: 1) Those mostly distributed in the USA, and established before 2000. 2) Dominant size of intentional communities is less than 20 residents and 20 houses. 3) They make decisions in consensus. 4) They eat together very frequently; at least once a week or more. 5) Shared work is required. The differences between the two communities are as follows: 1) They have different aims of establishment. For instance, ecovillage focus more on eco-living, while cohousing focuses more on the cohousing idea. 2) There are more female residents in cohousings than in ecovillages. 3) There are more cohousings in urban areas with a smaller area of land, contrary to that there are more ecovillages in rural areas with larger areas of land. 4) There are less identified leaders or leadership core groups in cohousing than in ecovillages. 5) Income sharing is more common in ecovillages than in cohousings. According to there findings, it is evident that a different purpose of establishment result in different characteristics of community life even though those belong to the similar category of the intentional community. Thus, it is recommended to adapt the correct characteristics that fit the aim of the community in the establishment an intentional community Topics and discussions about establishing intentional Topics and discussions abut establishing intentional communities could contribute to gather the intentional communities could contribute to gather the interests communities could contribute to gather the interests of residents as well as those of relevant civil-workers and administrators in Korea.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.526-533
• /
• 2008

In this study, theoretical super screen vibration analysis has been carried out to predict the dynamic characteristics of interactive waste particles. In order to approach these problems, it is necessary to have a fundamental understanding the screening process and the process of both the remaining and the passed material on a screen with several interacting screen planes based on Soldinger(1999) was discussed. Here, the vibrating screen is composed of three assemblies such as screen, wastes guide, and supported screen as shown in Fig. 1. This model is regarded vibrator as the system of screen fixed tilt plates. Then materials(or particles) of different size is to be separated by using the eccentric vibrator and classifying tilt plates. As well moisturized construction wastes is more efficient to separate than moisture-less it. In processing separate mechanism, the more materials is light, the more staying time is long. Thus much lighter construction wastes(wood, Styrofoam, etc) and heavier materials are separated by staying time delay in a super screen. The design results, separation screen were able to know that small and larger particles are conspicuous difference each motion character according to trajectory particles, and small particles raise the probability in classifying tilt plates.

• 한국습지학회지
• /
• 제16권1호
• /
• pp.125-137
• /
• 2014

본 연구에서는 국내 기존 도달시간 산정방법에 있어 Kraven(II)는 경사구간별 3가지 유속을 제시하고 있으므로 해당 유역특성이 충분히 반영되지 못하고 있다. 이에 최근 "설계홍수량 산정요령, 2012. 국토해양부"에서 제안한 보완된 연속형 Kraven 경험식은 완경사부와 급경사부의 유속을 보완하였으며, 평균유속이 최소유속 1.6m/s에서 최대유속 4.5m/s의 범위내의 연속성의 유속을 나타내고 있어서 현실적으로 타당한 범위를 가지며, 도달시간도 매우 합리적인 결과를 나타내고 있으므로 기존의 불연속의 문제나 매우 완만한 경우와 급한 경우의 적용성에도 매우 우수한 것으로 나타나고 있다. 본 연구에서는 도달시간 산정방법에 있어 기존 Kraven(II) 경험식과 보완된 연속형 Kraven 경험식에 따른 수문곡선의 변화양상을 살펴보았으며, 동화천, 매호천, 욱수천, 금포천에 대해서 각 해당 유역특성을 고려하여 단위도법-도달시간 산정방법에 따른 홍수유출모의결과를 비교분석하였다.

• 한국산림과학회지
• /
• 제11권1호
• /
• pp.25-32
• /
• 1970

강원도산(江原道産) 적송림(赤松林)중 우량임분(優良林分)을 대상으로 해서 지위지수곡선(地位指數曲線)을 작성(作成)해 보았고 이에 대한 비평을 가했다. 시료관계(試料關係)로 기준연령(基準年令)을 25년(年)으로 잡았다. 작성방법(作成方法)으로서는 삼군분할법(三群分割法)을 적용했다. 다음에는 입목밀도(立木密度)를 검토(檢討)했는데 11개(個) plot의 입목도(立木度)는 기왕(旣往)의 수확표(收穫表)의 그것에 비해서 훌륭한 상태(狀態)에 있었다. 미국의 라이넥캐의 표준밀도에 비교한 이곳 적송임분(赤松林分)의 흉고직경(胸高直徑)대 단위면적(單位面積)당의 입목임수관계(立木林藪關係)를 제공했다. 이것을 보면 강원도적송림(江原道赤松林)의 밀도(密度)는 대단히 우량(優良)한 것으로 결론(結論)된다. 점밀도(點密度)로서 재적추정(材積推定)을 한다는 것은 신뢰성(信賴性)이 낮은 것이라는 토의(討議)를 가했고 조림학적(造林學的)인 또는 생태학적(生態學的)인 주요성으로 점밀도(點密度)의 개념을 선명했고 3가지 가설집단에 대해서 그 내용(內容)의 일단(一端)을 분석(分析)했다.

• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.131-139
• /
• 2004

지내력기초 설계와 시공을 위해 실시하는 평판재하시험 결과로부터 실제 기초지반의 지지력 및 침하량을 산정할때 scale effect를 고려해야 하는데 국내에는 scale effect 적용기준이나 관련 시험자료가 없다. 그래서, 화강풍화토 지반에서 재하판 크기별 지지력 및 침하량의 상관관계를 파악하기 위해 모형토조 및 현장 평판재하시험을 실시하였다. 토조시험은 토조내에 지층을 형성한후 함수비 조건, 다짐횟수, 습윤 단위중량, 및 재하판 직경(D15, 25cm)별로 모형토조$(2,000\times 2,000\times 1,000mm)$에서 실시하였다. 현장 재하시험은 재하판 직경$(D15, 25, 30, 40, 75\times 75, 140\times 210cm)$별로 실시하였다. 재하시험 결과분석과 수치해석을 통해 토사 및 암반지반에서 지내력 기초설계시 Scale effect를 계산하기 위한 지지력 및 침하량 산정식을 제시하였다.

• 한국IT서비스학회지
• /
• 제18권4호
• /
• pp.67-82
• /
• 2019

The purpose of this study is to improve the calculation method of the software operation pricing proposed by the software business price calculation guide from 'input manpower method' to 'rate calculation method'. The software operation pricing of the input manpower method is not objectively calculated in the domestic IT outsourcing situation where the statistical data based on the activity based estimating is insufficient and it is decided by agreement between the owner and the client. In addition, there was no standard for adjusting the productivity according to the characteristics of the operation service. In order to improve this, an operational correction factor item that can affect the software operation productivity was selected based on foreign and domestic standards, and it was confirmed through the first questionnaire to IT operation managers. In order to determine the level of difficulty of the fixed operational correction factors, the operational correction factor using AHP technique was confirmed through a second questionnaire for pairwise comparison. The operational difficulty calculation table was developed with reference to COCOMO and ITIL standards. Finally, we propose a new pricing scheme that reflects the operating rate. Regression analysis was carried out by collecting the data of the domestic public institutions on the estimated cost and the actual cost calculated from the new rate method software operation pricing. The results of the regression analysis show that the estimated cost and the actual cost are related to each other. Mean magnitude of relative error(MMRE) and PRED[25] analysis were added for accuracy analysis. MMRE and PRED also showed satisfactory results, confirming the possibility of replacing the rate method software operation pricing.