• Journal of Environmental Health Sciences
• /
• v.37 no.6
• /
• pp.460-466
• /
• 2011

Objectives: Students in elementary schools usually wash their hands in a washstand. However, little attention is paid to the washstand itself. Today, the importance of personal sanitation and hygiene is greatly emphasized. Therefore students' parents and the public are growing increasingly interested in accessibility to washstands by elementary school students in their schools. Methods: With respect to this study, a survey of students and teachers inelementary schools was performed on the installation of washstands in order to determine the proper number of washstands per school. Results: The results show that 1.1 boys (per class) need a washstand, while 1.8 girls (per class) do so in order to maintain a 50% level of crowdedness. By of the regression equation, to maintain 50% congestion (50% of all students feel congestion) there should be 18.5 boys, and the 15.76 girls per washstand. Table 3 is based on the above results, the number of students per washstand (x) and congestion (y), separated by gender according to the results of regression analysis, the correlation of male models in the linear regression analysis and correlation of girls in the regression equation can be obtained. The linear regression fit of less than 0.7 determines that the coefficients of determination are 0.5399 and 0.4195, respectively. Significance was much smaller. Also, according to the simulation using the diffusion model, with 29 students per class more than one washstand should be provided in a school. Girls (per class) need 0.7 more washstands than boys (per class). Conclusions: More washstand facilities for girls than boys are needed. If the target is based on school class size two washstands should be installed. Finally, guidelines and/or standards in the Schools Health Act of Korea forin elementary school washstands is considerably needed.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.4
• /
• pp.143-152
• /
• 2012

The purpose of this study was to provide practical data for proposing the housing environment support policy, fit for returners-to-village. For the purpose, this study focused the patterns of returners-to-village according to their experience of rural life, and their ways of settlement like planning and getting land and house. The questionnaires were answered by 91 persons who were living in Chungbuk area, and were analyzed chi-analysis on their socio-demographic characteristics according to experience of rural life, preparation of settlement and construction. The ANOVA were used to analyze their pattern of return according to experience, the period for getting house, and their satisfaction level of house size. The results were as follows. First, the returners showed differentiated tendency according to their experience of rural life, in their age, family life cycle, education level and income source after return. The experience of rural life explained the purpose of return and the living pattern after return. Direct experience group was mostly occupational farmer; indirect experience group mostly pursued good health & green life; non experience group mostly pursued green life. Second, the experience of rural life also explained differentiated tendency of returning preparation. In raising money, direct experience group mostly raised it privately but indirect or non experience group mostly used bank loan. Third, the returners mostly constructed new houses; non experience group almost constructed newly, but there were cases to utilize existing or vacant house in direct experience group, and indirect experience group favored existing house or remodeling of vacant house.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.111-116
• /
• 2011

Since superconducting wires have no resistance, electromagnets based on the superconducting wires produce no resistive heating with DC current as long as the current does not exceed the critical current of the wire. However, unlike resistive wires, superconducting wires exhibit AC heat loss. Embedding fine superconducting filaments inside copper matrix can reduce this AC loss to an acceptable level and opens the way to AC-capable superconducting coils. Here, we introduce an easy and accurate method to measure AC heat loss from sample superconducting coils by measuring changes in the rate of gas helium outflow from the liquid helium dewar in which the sample coil is placed. This method provides accurate information on total heat loss of a superconducting coil without any size limit, as long as the coil can fit inside the liquid helium dewar. With this method, we have evaluated AC heat loss of two superconducting solenoids, a 180-turn solid NbTi wire with 0.127 mm diameter (NbTi coil) and a 100-turn filamented wire with 1.4 mm diameter where 7 NbTi filaments were embedded in a copper matrix with copper to NbTi ratio of 6.7:1 (NbTi-Cu coil). Both coils were wound on 15 mm-diameter G-10 epoxy tubes. The AC heat losses of the NbTi and NbTi-Cu coils were evaluated as $53{\pm}4.7\;{\mu}W/A^2Hzcm^3$ and $0.67{\pm}0.16\;{\mu}W/A^2Hzcm^3$, respectively.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.413-419
• /
• 2006

This study was performed to analyze the wearing practice and the purchasing characteristics of jeans in order to offer basic data to produce superior jeans made of denim with small flexibility and to improve the wearing comfort. The questionnaire were 236 Korean women from the age of 10th to 50th. For data analysis, descriptive analysis and crosstabs were used. The results were as follows, in the purchasing characteristics, when the women of 10th to 30th decided to purchase jeans they considered fashion, design and price rather than wearing comfort. But the women of 40th to 50th considered that wearing comfort is the most important factor. The 10th is found the best preferred jean is wide straight style, the 20th is straight style, the 30th is boots cut style and the 40th to 50th is straight style. In wearing practice, there was a difference among age groups on the region that felt uncomfortable when wearing jeans. As the age increases, the abdomen size also increases. Most people answered that they mend jeans after purchase for length, without any relation with age. The reason why consumers prefer jeans with middle length between the crotch and waist and also purchase jeans with a short length is because they look refined and neat. This informs us that the short length between the crotch and waist does not match with ease and comfort, which are the images of jeans in the past. Recently premium jean brands are competing to show Low Rise Jeans, which seems like a Premium Jean=Low Rise Jean formula is created. Some manufacture companies are recklessly copying foreign designs that does not fit Korean's body shape. However, as mentioned in this study results, there is a clear difference between designs that they think consider as aesthetic and functional. Therefore, it is considered necessary for developing designs for jeans that can satisfy both aesthetic appreciation and functions for Korean consumer's body shape and each age group.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.64-72
• /
• 1997

In this paper, study and experiments are performed for finding recognition unit fit which can be used in large vocabulary recognition system. Specifically, a phoneme that is currently used as recognition unit and a syllable in which Korean is well characterized are selected. From comparisons of recognition experiments, the study is performed whether a syllable can be considered as recognition unit of Korean recognition system. For report of an objective result of the comparison experiment, we collected speech data of a male speaker and processed them by hand-segmentation for phoneme boundary and labeling to construct speech database. And for training and recognition based on HMM, we used HTK (HMM Tool Kit) 2.0 of commercial tool from Entropic Co. to experiment in same condition. We applied two HMM model topologies, 3 emitting state of 5 state and 6 emitting state of 8 state, in Continuous HMM on training of each recognition unit. We also used 3 sets of PBW (Phonetically Balanced Words) and 1 set of POW(Phonetically Optimized Words) for training and another 1 set of PBW for recognition, that is "Speaker Dependent Medium Vocabulary Size Recognition." Experiments result reports that recognition rate is 95.65% in phoneme unit, 94.41% in syllable unit and decoding time of recognition in syllable unit is faster by 25% than in phoneme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2191-2198
• /
• 2017

The PME(precision measurement equipment) used in the measurement to check the performance of the equipment in military weapon system is periodically calibrated to maintain measurement reliability during the life cycle. Previous studies suggest that reliability models are determined by considering sample size and characteristics of equipment. However, it may not be fit well to apply a single model assuming the same characteristic distribution for the maintenance date of many kinds of PMEs. This paper proposes that the most suitable calibration interval for maintenance data is selected through the F-test and the performance index evaluation among the calibration intervals estimated from the measurement reliability models assuming the characteristic of the bath-tub curve during the life cycle of various PMEs. The research results show that the reliabilities of various types of equipment are maintained during calibration intervals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.911-919
• /
• 2004

IP address lookup is one of the essential functions on internet routers, and it determines overall router performance. The most important evaluation factor for software-based IP address lookup is the number of the worst case memory accesses. Binary prefix tree (BPT) scheme gives small number of worst case memory accesses among previous software-based schemes. However the tree structure of BPT is normally unbalanced. In this paper, we propose weighted binary prefix tree (WBP) scheme which generates nearly balanced tree, through combining the concept of weight to the BPT generation process. The proposed WBPT gives very small number of worst case memory accesses compared to the previous software-based schemes. Moreover the WBPT requires comparably small size of memory which can be fit within L2 cache for about 30,000 prefixes, and it is rather simple for prefix addition and deletion. Hence the proposed WBPT can be used for software-based If address lookup in practical routers.

• Information and Communications Magazine
• /
• v.13 no.4
• /
• pp.56-63
• /
• 1996

In this paper, the phisical layer of 4.3008 Mcps wideband CDMA which is proposed as the standard of personal communication service system is introduced. It is designed to fit 5 MHz bandwidth by using $28{\times}2^n$ Hadamard code. 13 kbps CELP vocoder is chosen as the main one and 32 kbps ADPCM can be applied. In the reverse link, the burst pilot scheme is proposed and produces the increase of capacity compared with the continuous pilot method. In order to maintain the service quality when the signaling data is increased, the information data and signaling data are time-multiplexed and making use of signaling activity brings the increase of capacity. QPSK data and QPSK spreading, variable frame size, and code pair assignment for high data rate are accomplished and then information data is transmited up to 64 kbps. It is expected that the proposed techiniques here are used in the FPLMTS.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.1-11
• /
• 2007

The rapid growths of economy and automobiles since the 1970's have caused serious traffic jams and environmental disruption in urban areas. To relieve these problems caused by urbanization, there should be considered alternative means of transportation modes. Many developed countries have accepted bicycles as a so called "Green Mode" for environmentally oriented strategies to increase the qualities of urban lives. Korea have also attempted various means to raise bicycle usages. In this research, significant factors affecting bicycle crashes at signalized intersections in urban areas were studied. The model results showed that Poisson regression is the best fit methodology for data modeling and revealed that traffic volume, a number of driveways, configuration of the ground, presence of bicycle path, school, and bus stop, residential area, size of intersection are significant factors affecting the bicycle crashes.